
Collapsible content
Description
Radium MPFST-R Multi-Pump Fuel Surge Tank with Built-In Regulator
Suits: Universal – any EFI build with a poorly baffled fuel tank
Part Number: 20-1445 / 20-1446 / 20-1447
The MPFST-R is a multi-pump surge tank with an RA-series regulator built in, so it can feed a big-power drag, drift or time attack build without an external regulator or return line to the engine. Your lift pump (usually the factory in-tank pump) keeps the surge tank full, its volume keeps the internal pumps fed through moments of lift pump starvation, and the excess overflows back to the main tank.
Because it's returnless, the single feed line simply dead-ends at the rail. It takes one, two or three pumps merged through the regulator outlet, pressure is set by hand at about 1 psi per click, and the swivelling vacuum port gives 1:1 boost reference or constant pressure if you plug it. There's a 1/8in NPT port for a gauge or sensor, and the feet take M6 or 1/4in bolts.
Pairs Well With
- Radium Fuel Pressure Gauge 0–100 psi (20-0029)
- Radium Fuel Level Switch, 1/8in NPT (20-0461)
- Radium Fuel Level Switch Plus Diagnostic Indicator (20-0519)
- Radium MPFST O-Ring Service Kit (20-0088)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
Good to Know
- Fuel pumps, gauge, level switch and LED indicator are not included.
- The overflow port can't be capped. Tanks without a return need a return port created.
- 20-1446: the Bosch BR540 has no check valve, so it can only be the primary pump when staging. Only 2 pumps fit with the optional level switch.
- 20-1447: the Walbro F90000295 has no check valve, so it can only be the primary pump when staging.
- Use PTFE thread sealant on NPT threads, and bench-test the level switch signal before fitting.
Vehicle Fitment
- Universal – suits any vehicle with a suitable mounting location
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.