
Collapsible content
Description
Radium Fuel Pressure Gauge 0–100 psi
Suits: Universal, any 1/8in NPT female port
Part Number: 20-0029
A quick way to see your actual fuel pressure when setting up a regulator or chasing a lean condition. It reads 0–100 psi (0–6.9 bar) at ±2% accuracy, and the silicone-filled dial damps needle bounce so the reading is easy to take on an idling engine.
Stainless case with a black bezel and a nickel-plated 1/8in NPT male fitting. This is the gauge only. Radium also offers it bundled with 8AN ORB, 6AN inline and 90° adapters.
Pairs Well With
- Radium Fuel Pressure Gauge with 6AN Inline Adapter (20-0152)
- Radium Fuel Pressure Gauge with 8AN ORB Adapter (20-0386)
- Radium Fuel Pressure Gauge with 90° Adapter (20-0407)
Good to Know
- A small bubble in the silicone fill is normal
- Don't exceed 100 psi. Over-pressure can permanently throw out the calibration
- Use PTFE paste on the NPT thread. Hand-tighten, then 1.5–3 turns with a spanner on the fitting, never by twisting the gauge body
Vehicle Fitment
- Universal, requires a 1/8in NPT female port or adapter
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.