
Collapsible content
Description
Radium Fuel Level Switch Plus Diagnostic Indicator Kit
Suits: Any fuel container with a 1/8in NPT port and a 2AN ORB port, including Radium FST, MPFST, MPFST-R, FCST and FCST-X surge tanks
Part Number: 20-0519
This kit pairs the Radium 1/8in NPT fuel level switch (20-0461) with the LED diagnostic indicator (20-0508). The stainless switch sits inside the tank and gives a switched signal when the level drops, which you can use for a dash warning, an ECU engine protection input or lift pump control.
The LED mounts in a 2AN ORB port and shows you at a glance what the switch is doing. It's mainly a diagnostic tool: when you're chasing a fuelling problem on the dyno or in the pits, it tells you straight away whether the surge tank is staying full.
Pairs Well With
Good to Know
- The switch has to be installed inside the fuel container.
- Bench test the signal direction first. You can reverse it by removing the E-clip and flipping the float.
- Needs a 1/8in NPT port for the switch and a 2AN ORB (5/16in-24) port for the LED.
- If you stack the LED on the level switch, the panel must be at least 19mm (0.75in) thick.
- Soldering is required to install the LED.
- Use PTFE thread sealant paste on the tapered pipe thread.
Vehicle Fitment
- Radium FST and Standard FST (current versions with level switch port)
- Radium MPFST and MPFST-R
- Radium FCST and FCST-X
- Universal – any suitable fuel container
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.