
Collapsible content
Description
Radium Fuel Hanger Surge Tank – Chevrolet Corvette C8 (Walbro F900 / 12mm Brushless)
Suits: Chevrolet Corvette C8 (2020+), RH fuel tank
Part Number: 20-1112
This is the Walbro F900 / 12mm brushless version of Radium's C8 FHST. It fits the stock RH tank on the side opposite the OEM pump module (which stays in place), reuses the large EVAP connections, and runs one, two or three pumps – enough for a heavily boosted LT2 on E85.
It can be set up for DI only, DI with port injection, or DI plus port injection with the hanger working as a true surge tank. A venturi jet pump pulls fuel from outside the collector to the pump inlets, and the one-piece anodised collector is kept full by three 355 lph one-way fill valves plus regulator return. For DI plus port injection, Radium recommends the DFPR to calm high-pressure pump pulses.
Pairs Well With
- Radium Check Valve, 6AN ORB to 10mm Barb (20-1534)
- Radium Fuel Pump Filter Base Adapter, 12mm Brushless Pumps (13-1187)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
- Radium DFPR Dual Fuel Pressure Regulator (20-1102)
- Radium MPR RA Multi-Port Fuel Pressure Regulator (20-1100-00 / -01)
- Radium FHST – Corvette C8, Walbro GSS342 / AEM version (20-1110)
- Radium FHST – Corvette C8, Ti E5LM version (20-1111)
Good to Know
- Fuel pumps are not included.
- Verified pumps: Walbro F90000267, F90000274, F90000285, F90000295; Protec 11928; Fuelab 49614; DeatschWerks DW810. Other pumps may fit but aren't verified by Radium.
- Walbro F90000295 and DW810 have no check valve – each needs a 20-1534.
- Protec 11928, Fuelab 49614 and DW810 need the 13-1187 base.
- The jet pump uses roughly 15–45 lph – allow for it when sizing pumps.
- The rear subframe / drivetrain has to come out to reach the tanks – the engine is often removed too.
- One wiring kit per pump. The OEM regulator delete (20-1278) is only needed for the merged setup; the C8 regulator mount (20-1279) and RWD filter mount (20-1280) are available on request.
- Radium doesn't specifically list RHD (Australian-delivered) C8s – please confirm fitment with us before ordering.
Vehicle Fitment
- Chevrolet Corvette C8 (2020+), RH fuel tank
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.