
Collapsible content
Description
Radium DFPR Dual Fuel Pressure Regulator
Suits: Universal, dual fuel systems (e.g. engines with both direct and port injection)
Part Number: 20-1102
Modern engines that run both direct and port injection need two separately regulated fuel pressures. The DFPR does both from one pump feed, in one body. It also suits modern venturi transfer systems that don't work well with a surge tank.
FPR1 and FPR2 each have their own detented, tool-less knob (about 1 psi per click). They share the RA-series swivelling vacuum reference and stainless return orifice for stable pressure. All four main ports are 8AN ORB.
Pairs Well With
Good to Know
- FPR2 is always equal to or lower than FPR1. If rising-rate pushes FPR2 above its setting, FPR1 rises to match
- Without port injection, plug FPR2 and turn its knob fully anticlockwise
- Feed the inlet from the low-pressure pump through a low-micron filter
- Fit the vacuum plug on returnless systems. With no tank return port, fuel can return through the filler pipe using barbed adapters
- Pressure dropping quickly after shut-off is normal. Long cranking points to feed line drain-back, not the regulator
Vehicle Fitment
- Universal, dual fuel systems such as combined direct and port injection engines
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.