
Collapsible content
Description
Radium FCST-X Fuel Cell Surge Tank – 1 Surge Pump + 1 Lift Pump (Walbro F900 / F90000274), Pumps Fitted
Suits: Universal – Radium fuel cells or any cell with a 6 x 10in 24-bolt top flange, min. 196mm deep
Part Number: 20-1992-01
This is Radium's FCST-X fuel cell surge tank supplied ready to go, with 1 Walbro F90000274 surge pump already installed and a matching Walbro F90000274 lift pump in the box. It's the quickest way to a proper race fuel system for a drag, drift or time attack car running a fuel cell – no sourcing pumps separately.
The lift pump pulls fuel from the bottom of the cell into the 2.6 litre surge canister, where the surge pumps feed the engine from three separate filter chambers. Three one-way fill valves (1065 lph combined) top the canister up whenever the cell level is higher, and regulator return goes straight into it, so the engine stays fed even if the lift pump uncovers. Lift and surge pumps are serviced through just nine bolts.
Pairs Well With
- Radium FCST-X 3-Bolt Remote Fill Neck, Straight 1.5in Barb (20-1027)
- Radium FCST-X 3-Bolt Remote Fill Neck, 24AN Elbow (20-1047)
- Radium FCST-X 3-Bolt Direct Mount Fill Neck and Cap, Vented (20-1197-V)
- Radium Fuel Level Switch Plus Diagnostic Indicator (20-0519)
- Radium DSV 12AN ORB to 12AN Male – Quick Fill (20-0535)
- Radium FCST-X Lift Pump Mounts – Universal All Depths (20-1214)
- Radium Extension Kit for FCST-X (20-1989)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
Good to Know
- Fuel cell is not included. Fits Radium cells or any cell with a 6 x 10in 24-bolt top flange at least 196mm deep; cells deeper than 323mm need separate lift pump mounts.
- The lift pump is packed loose so its height can be set to suit your cell (pre-installed if Radium builds the FCST-X into a cell).
- A filler with a 3-bolt flange (59.5mm PCD) is required – direct and remote fill necks are available.
- A hose and/or filter must be fitted to the VENT port.
- Fuel level sender is sold separately – a block-off plate is fitted as standard.
- One wiring kit per pump is recommended for full pump current.
Vehicle Fitment
- Universal – Radium fuel cells, or any cell with a 6 x 10in 24-bolt top flange and at least 196mm depth
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.