
Collapsible content
Description
Radium Standard Single Pump Fuel Surge Tank (FST)
Suits: Universal – any EFI build needing a stable fuel supply
Part Number: 20-0960
Poor tank baffling is one of the most common reasons a built car leans out mid-corner or at the top of a long straight. A surge tank fixes it without touching the factory tank: your existing in-tank pump keeps the FST topped up, the regulator return feeds back into it, and the excess overflows to the main tank. The pump inside the FST always has a column of fuel to draw from, so fuel pressure stays steady whether you're on a drift track, at a time attack round or doing laps on street E85.
The Radium single pump FST is a 1.5 litre extruded, anodised aluminium canister with removable O-ring sealed billet caps. The internal pump feeds the rail through a green 6AN outlet, while three interchangeable 6AN ORB ports handle lift pump inlet, overflow and regulator return. An internal deflector cuts foaming and aeration, and the tank can be mounted anywhere from vertical to horizontal.
Pairs Well With
- Radium FST Mounting Bracket, Universal Side / Floor (13-0054)
- Radium Fuel Level Switch, 1/8in NPT (20-0461)
- Radium Fuel Level Diagnostic Indicator (20-0508)
- Radium O-Ring Service Kit, Standard FST (20-0087)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
Good to Know
- Fuel pump is not included.
- An overflow return to the main tank is required on every install. Tanks without a return port need the hanger top or filler neck modified.
- The pump outlet is 6AN male only.
- Mount it away from crash-prone areas, heat sources and moving suspension parts.
- Verified pumps: Walbro F90000267, F90000274, F90000285, F90000295, GSS341, GSS342; AEM 50-1000, 50-1200, 50-1220; Bosch BR540; DeatschWerks DW400, DW440, DW810; Protec 11928; Fuelab 49614; Ti Automotive E5LM.
Vehicle Fitment
- Universal – suits any vehicle with a suitable mounting location
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.