
Collapsible content
Description
Radium RA-Series FPR Conversion Kit (Green)
Suits: Earlier-generation Radium adjustable regulators: DMR, MPR, FPR-D, and hangers / surge tanks with a built-in regulator
Part Number: 20-1101-01
This is the green version of the RA-series upgrade for older Radium regulators. It brings the tool-less detented knob (about 1 psi per click), the single stainless return orifice for laminar, stable flow, and the 360° swivelling vacuum reference that points any direction without tools.
Minimum pressure is 1.3 bar (18.5 psi). Maximum isn't limited by the regulator; it's set by your pump relief valve or controller.
Pairs Well With
- Radium RA-Series FPR Conversion Kit, Black (20-1101-00)
- Radium Fuel Pressure Gauge 0–100 psi (20-0029)
Good to Know
- Torque the return orifice to 4.0 Nm and the top cap screws to 0.7 Nm in a cross pattern. Don't reuse the old spring hat
- Use medium-strength wicking thread locker on the vacuum fitting
- Pressure dropping quickly after shut-off is normal. Long cranking points to feed line drain-back, not the regulator
Vehicle Fitment
- Radium Direct Mount Regulator (all generations)
- Radium Multi-Port Regulator (all generations)
- Radium Fuel Pressure Regulator Damper (all generations)
- Radium hangers and surge tanks with integrated regulator
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.