
Collapsible content
Description
Radium Fuel Surge Tank Install Kit – Mitsubishi Evo X
Suits: Mitsubishi Lancer Evolution X (2008–2015), excluding RHD cars with the OEM washer reservoir in the mounting location
Part Number: 20-0113
A built Evo X will starve for fuel in long corners on a low tank, and that's usually when the damage is done. This kit fits a Radium single pump fuel surge tank behind the rear seat, in front of the boot trim panel, so the engine always draws from a full surge tank.
The powder-coated aluminium bracket bolts to the factory mounting bosses with no drilling or cutting, the trim panel goes back in, and you keep all of your usable boot space. The pre-assembled, cut-to-length 6AN PTFE hoses connect to the OEM lines, won't let fuel smell into the cabin, and are fine with E85. The solder-free wiring takes under 30 minutes.
Pairs Well With
- Radium Standard Single Pump FST (20-0960) – the surge tank this kit installs (required)
- Radium Fuel Pump Hanger – Mitsubishi Evo X – removes the OEM return restriction and adds a higher-flowing jet pump
- Radium Fuel Hanger Return Kit – Evo X (20-0249)
Good to Know
- The surge tank and fuel pump are not included.
- Check your car first: it won't fit RHD models that have the factory washer reservoir in the mounting location.
- Plumbing and wiring are for a single pump. A dual-pump tank needs a Radium DIY harness and a second hose to the fuel rail.
- With a Radium FST-R, the kit reuses the OEM regulator. One hose isn't used, the OEM 1/4in regulator return hose must be removed, drained or plugged, and the regulator vacuum line has to be extended to the boot.
- Slightly higher static fuel pressure is normal with a high-flow pump because of the restrictive OEM return port. The instructions show how to enlarge it.
- You may need a main tank pump upgrade. As a guide, the main tank pump should flow about 40–50% of the surge tank pump.
Vehicle Fitment
- Mitsubishi Lancer Evolution X (2008–2015) – except RHD cars with the washer reservoir in the mounting location
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.