
Collapsible content
Description
Radium Fuel Surge Tank Install Kit – Mitsubishi Evo VIII / IX
Suits: Mitsubishi Lancer Evolution VIII and IX (CT9A)
Part Number: 20-0120
Evos are known for fuel starvation under hard cornering once the tank gets below half, which is exactly when a lean cylinder ends a time attack session or a track day. This kit installs a Radium single pump fuel surge tank in the boot, centred behind the rear seat in a collision-safe spot, so the engine is fed from a full surge tank whatever the main tank is doing.
The aluminium bracket mounts to the V-brace in front of the rear seat carpet cover, and the tank is isolated through the carpet cover to keep pump noise and vibration down. Most of the boot stays usable, and the solder-free wiring goes together in under 30 minutes.
Pairs Well With
- Radium Standard Single Pump FST (20-0960) – the surge tank this kit installs (required)
Good to Know
- The surge tank and surge tank pump are sold separately.
- Not designed for the Radium MPFST.
- Radium lists this kit for the Evo VIII and IX. If you have an Evo VII, email us before ordering.
- Slightly higher static fuel pressure is normal with a high-flow pump because of the OEM return port restriction. The instructions cover modifying the OEM jet pump to improve return flow.
- You may need a main tank pump upgrade. As a guide, the main tank pump should flow about 40–50% of the surge tank pump.
Vehicle Fitment
- Mitsubishi Lancer Evolution VIII (CT9A)
- Mitsubishi Lancer Evolution IX (CT9A)
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.