
Collapsible content
Description
Radium Fuel Surge Tank Install Kit – Honda S2000 AP2
Suits: Honda S2000 AP2 (2006–2009, returnless fuel system)
Part Number: 20-0114
The S2000 tank is shallow and oddly shaped, and fuel starvation in long corners is a well-known problem once the car sees a track. This kit installs a Radium FST-R surge tank with a single 39mm pump behind the left seat, using the factory threaded bosses. There's no drilling, and the boot stays fully usable.
Later S2000s are returnless, so the kit is built around the FST-R with its integrated regulator. Because there's no low-pressure return to the tank, a billet barb adapter sends excess fuel back to the main tank through the filler hose. Leave the regulator's manifold-pressure barb disconnected if you want to replicate OEM fuel pressure.
Pairs Well With
Good to Know
- Needs the Radium FST-R (regulated) surge tank. The surge tank and pump are both sold separately.
- Not designed for the Radium MPFST.
- The main tank pump has to keep the surge tank full. As a guide it should flow about 40–50% of the surge tank pump, so you may need a main pump upgrade.
- The S2000 cabin is small, so think about pump noise when choosing a surge tank pump.
- For the 1999–2005 AP1 S2000, use the AP1 install kit (20-0094).
Vehicle Fitment
- Honda S2000 AP2 (2006–2009)
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.