
Collapsible content
Description
Radium FST-R RA Fuel Surge Tank with Integrated Regulator
Suits: Universal – any EFI build needing a stable fuel supply
Part Number: 20-1933
The FST-R does the same job as a standard surge tank – keeping the engine fed when poor tank baffling lets the main pump suck air in corners or under brakes – but with an RA-series fuel pressure regulator built into the top cap. Excess fuel goes straight back to the main tank, so you lose an external regulator, a handful of fittings and a couple of hoses, and the fuel in the system runs cooler. It's a tidy way to upgrade the pump in a drift car, time attack build or street E85 car without touching the factory tank.
Pressure is set by hand with detents of about 1 psi per click, and the swivelling, double O-ring sealed vacuum port lets you run 1:1 boost reference or stay static. An internal flow deflector stops foaming and aeration, and the whole unit is CNC-machined, anodised aluminium with FKM seals and stainless hardware.
Pairs Well With
- Radium FST Mounting Bracket, Universal Side / Floor (13-0054)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
- Radium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)
- Radium Check Valve, 6AN ORB to 10mm Barb (20-1534)
- Radium Fuel Pressure Gauge with 6AN Inline Adapter (20-0152)
Good to Know
- Fuel pump is not included. Single-pump design only – there's no dual-pump version.
- A fuel pressure gauge or sensor is needed to set and monitor pressure. Fit it anywhere between the regulated outlet and the rail(s).
- A relay kit is recommended to drive the internal pump.
- AEM 50-1230 / 50-1235 have no check valve (use 20-1533). Walbro F90000295, Bosch BR540 and Ti E5LM have no check valve (use 20-1534).
- Mount it away from heat, moving and suspension parts, and crash-prone areas.
Vehicle Fitment
- Universal – suits any vehicle with a suitable mounting location
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.