
Collapsible content
Description
Radium Fuel Pump Hanger – Toyota Supra JZA80 (1993–2002)
Suits: Toyota Supra JZA80 (MK4), 2JZ-GTE and 2JZ-GE
Part Number: 20-1510 / 20-1511 / 20-1512
A big single-turbo 2JZ on E85 needs far more fuel than the factory MK4 pump can supply, and the OEM sub-tank isn't great at stopping starvation either. The Radium hanger runs one, two or three aftermarket pumps in the stock tank without permanently modifying the access cover, so it suits everything from a street car on a mild upgrade to a 1000hp drag or roll racing build.
All pump outlets merge into a single 10AN billet collector with a high-flow check valve to hold pressure after shut-down. A redesigned jet pump scavenges fuel from outside the sub-tank and feeds the pump inlets directly, without restricting the return. Barb fittings are supplied to reconnect the OEM return and vent hoses, and the OEM fuel sender and temperature sensor are retained.
Pairs Well With
- Radium Top Feed Conversion Fuel Rail – Supra JZA80 2JZ-GTE (20-0215)
- Radium Fuel Hanger Plumbing Kit with Filter – Supra A80 (20-0415-03 / -05)
- Radium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)
- Radium Check Valve, 6AN ORB to 10mm Barb (20-1534)
- Radium Fuel Pump Filter Base Adapter, 12mm Brushless Pumps (13-1187)
- Radium Fuel Pump Inlet Filter Sock (14-0143)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
Good to Know
- Fuel pumps are not included.
- AEM 50-1230 / 50-1235 pumps have no check valve – each needs one 20-1533.
- 20-1511 (Ti E5LM): each pump needs one 20-1534 check valve, plus a Ti BKS1001 controller.
- Protec 11928, Fuelab 49614 and DW810 pumps don't fit the included strainer and need the 13-1187 base.
- The jet pump uses roughly 15–45 lph – allow for it when sizing pumps.
- Upgraded wiring is recommended, one kit per pump.
- The 20-0415 plumbing kit is designed for the Radium 20-0215 fuel rail and doesn't suit the stock 2JZ rail.
Vehicle Fitment
- Toyota Supra JZA80 (1993–2002) – 2JZ-GTE twin turbo and 2JZ-GE
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.