
Collapsible content
Description
Radium Fuel Pump Hanger – Nissan Silvia S14 / S15, Skyline R33 / R34
Suits: Nissan Silvia / 200SX S14 and S15, Skyline R33 and R34 (all models, RHD and LHD)
Part Number: 20-0630-00 (Walbro GSS342 / AEM 50-1200 style pumps), 20-0632-00 (Walbro F900-series and brushless pumps)
The factory pump assembly in an S14, S15 or R33/R34 is long past its best on a built SR20 or RB running E85. This hanger replaces it completely and runs one or two aftermarket pumps, including brushless, with the pumps sitting at the bottom of the tank. The factory level sender, low fuel switch and (on OBD-II cars) fuel temperature sensor all stay.
An integrated jet pump scavenges fuel from the passenger side of the saddle tank. Radium redesigned the siphon so it doesn't choke the return when you run high-flow pumps, keeping return backpressure in check. Factory quick-connect and barb lines connect directly, so it's equally at home in a street car, a drift car or a time attack Skyline.
Pairs Well With
- Radium Fuel Hanger Plumbing Kit with Filter – S14 / S15 / R33 / R34 (20-0702)
- Radium Fuel Hanger Surge Tank Add-On – S14 / S15 / R33 / R34 (20-0700)
- Radium Check Valve, 6AN ORB to 8.5mm Barb (20-1533) – for AEM 50-1230 / 50-1235
- Radium Check Valve, 6AN ORB to 10mm Barb (20-1534) – for Walbro F90000295 / Ti E5LM
- Radium Pump Outlet Adapter with Check Valve, 10mm Barb (20-0798)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031) – one kit per pump
Good to Know
- Fuel pumps and fuel pressure regulator are not included.
- 20-0630-00 suits Walbro GSS342, AEM 50-1200, 50-1230 and 50-1235. The AEM 50-1230 / 50-1235 have no internal check valve and need 20-1533.
- 20-0632-00 suits Walbro F90000267, F90000274, F90000285, F90000295 and Ti E5LM brushless. The F90000295 and E5LM need 20-1534.
- If you run aftermarket AN hose, use low-profile swivel fittings (sold separately). Straight fittings may not clear the access cover.
- The jet pump uses 15–45 lph depending on pressure. Allow for this when sizing pumps.
- Single-pump installs can reuse OEM wiring, but upgraded wiring is recommended so the pumps see full voltage.
- Comes partly assembled. Final assembly is done during installation.
Vehicle Fitment
- Nissan Silvia / 200SX S14 – all models, RHD and LHD
- Nissan Silvia / 200SX S15 – all models, RHD and LHD
- Nissan Skyline R33 – all models, RHD and LHD
- Nissan Skyline R34 – all models, RHD and LHD
- Nissan 240SX S14 (LHD)
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.