
Collapsible content
Description
Radium Fuel Pump Hanger – Mitsubishi Lancer Evolution X (Brushless)
Suits: Mitsubishi Lancer Evolution X (2008–2015), 4B11T
Part Number: 20-1643
This is the brushless-pump version of Radium's redesigned Evo X hanger, for 4B11T builds that need the flow of a DW440, DW810, Fuelab or Protec pump. It replaces the whole in-tank module, runs one or two pumps, and keeps the OEM level sender, fuel temperature sensor and tank pressure sensor so everything on the dash still works.
A one-piece anodised collector with a 355 lph one-way fill valve, topped up by regulator return, keeps fuel at the pump inlets through long corners. Radium's redesigned siphon removes the restriction of the OEM jet pump while still scavenging the tank, so higher-flow pumps don't cause pressure problems.
Pairs Well With
- Radium Evo X Fuel Feed – Stainless Filter (20-0946-03)
- Radium Evo X Fuel Feed – Microglass Filter (20-0946-05)
- Radium Fuel Hanger Return – Evo X (20-0249)
- Radium Fuel Tank Pressure Sensor Plug – Evo X (20-0421)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
- Radium Fuel Pump Hanger – Evo X, DW400 version (20-1644)
- Radium Fuel Pump Hanger – Evo X (20-1640 / 20-1642)
Good to Know
- Fuel pumps are not included. Suits DeatschWerks DW440, DW810, Fuelab 49614 and Protec 11928 (filter socks come with the pumps).
- Brushless pumps need flying-lead harnesses, supplied by the pump maker. For the DW810, fit the 10mm barb supplied with the pump.
- The OEM post-pump filter is deleted – fit a low-micron filter downstream (the 20-0946 feed kits include one with a check valve).
- No check valve is included – fit one if fuel pressure needs to hold after shut-down.
- The jet pump uses roughly 15–45 lph – allow for it when sizing pumps.
- Don't use the OEM wiring for pumps drawing over 15A. Upgraded wiring is recommended, and bigger feed and return lines for multiple pumps.
- Cars without the OEM tank pressure sensor need the 20-0421 plug.
Vehicle Fitment
- Mitsubishi Lancer Evolution X (2008–2015), 4B11T
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.