
Collapsible content
Description
Radium Fuel Pump Hanger – Chevrolet Corvette C5 / C6 (Mid 2003–2013)
Suits: Chevrolet Corvette C5 (mid 2003–2004) and C6 (2005–2013), cars after VIN 35114930
Part Number: 20-0980
Blown and turbo LS-powered C5s and C6s need more fuel than the factory assembly can supply. The Radium hanger replaces the OEM pump assembly in the LH tank and runs one aftermarket pump, with the 20-0937 add-on available for a second.
Its collector is fed from three places – crossover fuel scavenged from the passive side by the OEM jet pump, regulator return, and two 355 lph one-way fill valves – so the pump stays covered under hard driving. It takes a wide range of brushed and brushless pumps, with a 10AN ORB outlet and 8AN ORB return.
Pairs Well With
- Radium Dual Pump Add-On – Corvette 2003–2019 (20-0937)
- Radium Fuel Hanger Plumbing Kit – Corvette Mid 2003–2008 (20-0981-03)
- Radium Fuel Hanger Plumbing Kit – Corvette C6 2009–2013 (20-0983-03)
- Radium FPR Bypass – Corvette Mid 2003–2013 (20-0574)
- Radium Fuel Pump Clamp, 41–43mm Pump Bodies (20-0441)
- Radium Low Profile Swivel Banjo, 6AN ORB to 5/16in SAE Quick Connect (20-1000-06313)
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
- Radium Adjustable Pressure Switch (20-0236)
Good to Know
- Fuel pump is not included.
- An external regulator and low-micron filter must be added – the Radium plumbing kits include both (manual cars only).
- Use the 20-0574 FPR bypass to run fuel pressure below the OEM 58 psi.
- Ti E5LM and Walbro F90000295 have no check valve – a high-flow check valve is included for them.
- DW440, DW810, Protec 11928 and Fuelab 49614 (41–43mm bodies) need the 20-0441 clamp.
- Upgraded wiring is recommended, one kit per pump. A second pump needs its own relay and fuse.
- ZR1: Radium recommends swapping the straight SAE quick connect for the 90° 20-1000-06313 fitting.
Vehicle Fitment
- Chevrolet Corvette C5 (mid 2003–2004, after VIN 35114930)
- Chevrolet Corvette C6 (2005–2013)
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.