
Collapsible content
Description
Radium Fuel Hanger Surge Tank (FHST) – Nissan 370Z / Z (Brushless)
Suits: Nissan 370Z Z34 (2009–2020) and Nissan Z RZ34 (2023+), RHD and LHD
Part Number: 20-1821
The 370Z and new Z saddle tank is well known for starving under hard driving, which is exactly what happens on a track day or at a time attack round once the car's on sticky tyres. This FHST builds a surge tank inside the factory tank, so there's no cutting and no separate surge tank in the boot. This version is set up for Ti Automotive E5LM brushless pumps, with two bolt-on check valves so you can stage two pumps and keep the system primed.
The OEM module pump keeps the collector box full while the factory venturi jets keep scavenging from the bottom of the tank. The FHST pumps then draw from the module pump, the built-in 1:1 regulator's return and 355 lph one-way fill valves. A gauge is supplied, and it's E85 compatible.
Pairs Well With
- Radium DIY Fuel Pump Hard Wiring Kit (17-0031)
- Radium Low Profile Swivel Banjo, 8AN ORB to 8AN Male (20-1000-0808)
- Radium Fuel Hanger FPR Block-Off Plate (20-0806)
- Radium Low Profile Swivel Banjo, 6AN ORB to 6AN Male (20-1000-0606)
- Radium FHST – 370Z / Z, Walbro F900 version (20-1822)
- Radium FHST – 370Z / Z, Walbro / AEM version (20-1820)
Good to Know
- Fuel pumps are not included. The E5LM needs a brushless pump controller.
- The OEM module pump must be upgraded to at least 340 lph at 40 psi, and the OEM venturi system must stay – don't modify the OEM regulator or jet pump.
- The Radium regulator should be the only regulator in the system. The "IN" fitting contains a venturi and can't be changed; the "OUT" fitting can.
- Use an 8AN feed line for high-flow setups.
- The OEM post-pump filter stays. A downstream aftermarket filter is recommended but not required.
- The fuel gauge won't read accurately, although starvation won't occur early.
- A second pump needs the 17-0031 wiring kit. With the 20-0806 block-off you'll need a downstream regulator (not covered in the instructions).
Vehicle Fitment
- Nissan 370Z Z34 (2009–2020), RHD and LHD
- Nissan Z RZ34 (2023+), RHD and LHD
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.