
Collapsible content
Description
Radium Venturi Jet Pump Kit
Suits: Universal – saddle-style fuel tanks (RWD and AWD) running high-flow aftermarket pumps
Part Number: 20-0180
Saddle tanks rely on a jet pump to move fuel from the far side of the tank across to the pump. Factory jet pumps are sized for factory pump flow. Add a big aftermarket pump and the OEM unit becomes a choke point in the return, pushing fuel pressure up, and drilling it out wrecks the siphon effect.
Radium's billet jet pump is built around aftermarket flow rates, with three interchangeable inlet orifices that were vacuum-tested across a range of pump combinations. It's the fix when a pump upgrade on a saddle-tank car starts fighting the factory return, whether that's a street E85 car or a drift or time attack build that needs every drop of fuel picked up.
Pairs Well With
- Radium Duckbill Valve (18-0026) – fits straight onto the outlet barb in place of a submerged hose
Good to Know
- The OEM jet pump must be removed – the system won't work if fuel is still pushed through it.
- Fit a hose (not included) to the 8.5mm outlet barb with its end submerged low in the tank, or use a duckbill valve, so the jet pump can't draw air back the other way.
- Barbs suit 5/16in or 3/8in ID hose. Rigid hose needs the smaller ID to seal.
- The siphon port fitting can be swapped for any 6AN ORB fitting.
Vehicle Fitment
- Universal – saddle-style fuel tanks
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.