Skip to product information
1 of 3

Radium Single Catch Can, 8An Kit, Fluid Lock

SKU:20-1808-FL

2 In Stock

Regular price $506.99
Regular price Sale price $506.99
Sale Sold out
Taxes included.
Quantity
Secure checkout
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
View full details

Collapsible content

Description

Radium Universal Single Catch Can Kit, 8AN, Fluid Lock

Suits: Universal, engines with 1/2in (12.7mm) ID breather hose
Part Number: 20-1808-FL

If Radium doesn't make a bolt-in kit for your engine, this is the next best thing: a complete catch can setup in one box. You get the Fluid Lock can, a mounting bracket, 3m of PCV hose and 8AN fittings with straight, 45° and 90° PushLok ends, so you can plumb it neatly around whatever's in your engine bay.

The patented Fluid Lock design stops the 207ml can overfilling. If it fills and isn't emptied, an internal valve closes to keep oil out of the engine while normal venting carries on. The can is billet 6061 with O-ring seals, so it's fine under boost. Measure your breather fittings to pick the right kit size: this one suits 1/2in ID hose.

Pairs Well With

Good to Know

  • Some engines need more than one can, depending on the PCV system
  • Not designed for aftermarket crankcase vacuum pumps
  • Not every fitting will be used on every install. Extra fittings are sold separately
  • To drain, unscrew the lower half of the can, or use the plugged 4AN ORB drain port where space is tight

Vehicle Fitment

  • Universal, 1/2in (12.7mm) ID breather hose

Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.

Tech Specs

  • Part number: 20-1808-FL
  • Type: Universal single Fluid Lock catch can kit, 8AN
  • Hose size: 1/2in (12.7mm) ID
  • Capacity: 207ml (7 fl oz)
  • Can ports: 10AN ORB inlet and outlet, plugged 4AN ORB drain
  • Level check: M8x1.25mm dipstick
  • Material: Machined 6061 aluminium, O-ring sealed
  • Boost: Suits forced induction

Contents

  • 1x Fluid Lock catch can
  • 2x 10AN ORB to 8AN male low-profile swivel fittings
  • 2x 10AN ORB to 8AN male fittings
  • 2x 8AN PushLok straight hose ends
  • 2x 8AN PushLok 45° hose ends
  • 2x 8AN PushLok 90° hose ends
  • 1x PCV hose, 1/2in ID, 3.05m (10ft)
  • 2x Spring clamps for 1/2in hose
  • 1x Aluminium mounting bracket
  • 1x Set of stainless M6x1mm bolts and flanged nuts
  • 1x Service interval decal

Install Instructions