
Collapsible content
Description
Radium Non-Shrouded SAE Fuel Level Sender, 0-90 Ohm, 11.7in
Suits: Radium FCST and FCST-X fuel cell surge tanks, including older 20-049X-XX and 20-069X-XX FCSTs
Part Number: 20-0747-297
This is the non-shrouded version of Radium's 11.7in sender. It's the one you need if you're running an older FCST (20-049X-XX or 20-069X-XX), because the bore on those tanks is too small for the newer 40mm shrouded senders. It also fits every other Radium FCST and FCST-X.
It uses the standard SAE 5-bolt pattern and a fully sealed stainless probe with a magnetic float. It reads 0 ohm empty to 90 ohm full, which matches most aftermarket gauges.
Pairs Well With
- Radium Shrouded Fuel Level Sender, 11.7in (20-0847-297)
- Radium FCST-X Fuel Cell Surge Tank
- Radium Fuel Level Sensor Block-Off Kit (20-0146)
- Radium 12AN ORB 5-Bolt SAE Adapter (20-0439)
Good to Know
- Radium lists 20-0747-297 as discontinued. We'll sell remaining stock until it's gone. For newer FCST (20-099X-XX) and FCST-X (20-199X-XX) tanks the current equivalent is 20-0847-297
- You need a 0-90 ohm gauge. Radium doesn't sell gauges, and a resistance converter may be needed for factory gauges
- To test, measure resistance across the two wires while tipping the float
- Maximum internal tank pressure is 6 psi. Tighten the mounting bolts to 15-20 in-lb
Vehicle Fitment
- Radium FCST and FCST-X fuel cell surge tanks (SAE 5-bolt sender port)
- Older Radium FCST 20-049X-XX and 20-069X-XX
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.