
Collapsible content
Description
Radium Saddle Tank Fuel Cell Conversion Kit
Suits: Two Radium RA-Series fuel cells running with a Radium FCST-X
Part Number: 20-0664
This kit links two fuel cells into one system. You get more capacity, and you can place the cells for balance and a low centre of gravity. They can run transversely or longitudinally, and the kit includes fittings and hose for both layouts. The two cells can be different sizes.
The FCST-X sits in the active cell with its rollover valve removed, so its vent becomes an overflow feeding the passive cell. The TEE orientation in the fill plumbing sets which cell fills first and which side the filler sits on. It works with standard or dry break refuelling, and the 1.5in ID crossover hose suits any remote filler with a 1.5in OD barb.
Pairs Well With
- Radium FCST-X Fuel Cell Surge Tank
- Radium Fuel Level Switch (20-0461)
- Radium Fuel Level Diagnostic Indicator (20-0508)
- Radium FCST-X Lift Pump Mounts, All Depths (20-1214)
- Radium Shrouded Fuel Level Sender, 11.7in (20-0847-297)
Good to Know
- Sold separately: two Radium RA-Series fuel cells with top flanges at the same height
- Sold separately: a Radium FCST-X. Earlier non-X FCSTs aren't compatible because they lack the lift pump access handle
- Sold separately: at least 3 fuel pumps (2 lift pumps, 1 surge tank pump). Lift pumps need built-in outlet check valves or they can back-feed and fail
- Sold separately: a remote filler and vent kit or remote refuelling kit (1.5in OD barb)
- Two 0-90 ohm senders in series give a 0-180 ohm range. Or wire them to separate ECU inputs so the passive sender can switch off the passive lift pump
- The passive lift pump needs custom ECU or PDM control. The active lift pump can run off the 20-0461 level switch
- Radium lists the 20-0461 switch port as 1/8in NPT on the kit page but 2AN ORB on the FCST-X page. Email us to confirm
- Have it installed by an experienced workshop. Torque the 24 cell screws to 4.5Nm (40 in-lb) in a cross pattern
Vehicle Fitment
- Two Radium RA-Series fuel cells (24-bolt 6x10 opening) with a Radium FCST-X
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.