
Collapsible content
Description
Radium Fluid Lock PCV Catch Can Kit, Honda S2000 AP1 / AP2
Suits: Honda S2000 AP1 / AP2, all RHD (2000–2009)
Part Number: 20-0098-FL
The S2000's PCV valve draws oil vapour into the intake manifold at idle and cruise, and a hard-revved F-series sends plenty through. This kit puts a Fluid Lock can inline with the 3/8in PCV valve to catch it. The can is pressure sealed, so it can connect to the manifold even on a boosted car.
Two brackets are included: an S2000-specific one, and a universal one for when you're also fitting the crankcase kit. You use whichever suits your setup. No drilling, and the patented Fluid Lock design stops it overfilling.
Pairs Well With
- Radium Crankcase Fluid Lock Catch Can Kit, S2000 (20-0097-FL)
- Radium Dual Fluid Lock Catch Can Kit, S2000 (20-0099-FL)
- Radium Catch Can Petcock Drain Kit (20-0024)
Good to Know
- Fits all RHD S2000s and 2006–2009 LHD cars. 2000–2005 LHD cars need the cruise control module removed
- There's no fixed emptying interval. Check the dipstick after 3–4 weeks. PCV cans usually collect more than crankcase cans
- Empty by unscrewing the lower reservoir, or fit the petcock drain kit where there's room
- Collecting a lot of oil can point to blow-by, an overfilled sump, poor breather baffling or a PCV valve that doesn't close under load
Vehicle Fitment
- Honda S2000 RHD (2000–2009)
- Honda S2000 LHD (2006–2009)
- Honda S2000 LHD (2000–2005), only with the cruise control module removed
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.