
Collapsible content
Description
Radium Fuel Surge Tank for External Pumps
Suits: Universal – fuel-injected engines running external electric or mechanical pumps
Part Number: 20-1195
Big external pumps and mechanical pumps on drag and drift builds need a steady column of fuel to draw from, and a poorly baffled tank won't give them that under hard launches or long corners. This 2.21 litre surge tank sits between the main tank and your external pump(s): the in-tank lift pump keeps it full, regulator return tops it up, and excess overflows back to the main tank.
It ships with one 10AN pickup and includes a second 10AN pickup plus parts to convert to 16AN, so you can run a single 10AN, dual 10AN, single 16AN or 16AN + 10AN setup – the second pickup is handy for a priming pump alongside a mechanical pump. Three 8AN ORB ports come fitted with 6AN male fittings, and the base suits uneven surfaces like a boot floor.
Pairs Well With
- Radium High Flow Fuel Filter
- Radium Fuel Level Switch, 1/8in NPT (20-0461)
- Radium Fuel Level Diagnostic Indicator (20-0508)
Good to Know
- External fuel pump(s) are not included.
- For fuel-injected engines only (not carburettors) – a fuel pressure regulator is required.
- A high-micron pre-pump filter is required when using the 16AN pickup.
- Size the lift pump at about 40–50% of surge pump flow – e.g. an 1100 lph surge pump needs roughly a 440–550 lph lift pump at 40 psi.
- Don't mount the tank horizontally – the pickups can draw air pockets.
- Additional mounting hardware may be needed.
- Radium's instructions show a 20-0461 level switch and LED indicator – email us to confirm whether they're supplied with your tank.
Vehicle Fitment
- Universal – suits any vehicle with a suitable mounting location
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.