
Collapsible content
Description
Radium Pump Outlet Adapter with Check Valve, 6AN Male
Suits: TI Automotive E5LM (BKS1000 / BKS1001), Walbro/TI F90000295, Bosch BR540, DeatschWerks DW400 (pre May 2019)
Part Number: 20-0598
Some high-flow pumps don't have a check valve, and a typical integrated pump check valve is a big restriction. This billet adapter adds a high-flow check valve and converts the outlet to 6AN male. Radium's testing shows 15 LPH of restriction and 0.5 A of extra current draw. A standard integrated valve measured 46–76 LPH and 3.2–4.8 A. Less restriction means the pump draws less current, keeps the fuel cooler and is less likely to cavitate. The valve uses a stainless plunger and spring, with FKM O-rings for E85.
Pairs Well With
- Radium Pump Outlet Adapter with Check Valve, 10mm Barb (20-0798)
- Radium Pump Outlet Adapter, No Check Valve (20-0298)
Good to Know
- Only for the pumps listed. It may physically fit others, but many have internal check valves and should use the non-check-valve adapter
- Inspect the pump's hose barb first. A damaged or deformed barb won't seal
Vehicle Fitment
- TI Automotive E5LM (BKS1000 / BKS1001 kits)
- Walbro/TI F90000295
- Bosch Motorsport BR540
- DeatschWerks DW400 (pre May 2019)
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.