
Collapsible content
Description
Radium Fuel Cell Vent Kit, 8AN
Suits: Universal, fuel cells with an 8AN male vent fitting, including Radium FCST and FCST-X
Part Number: 20-0484-08
A fuel cell vent lets air out as the cell fills and lets filtered air back in as fuel is used, so the tank never pressurises. This standard-flow kit suits systems with a direct or remote fill neck, and it can use the vent fitting supplied with a Radium FCST. The kit has an 8AN PushLok hose end, a Radium air filter, 1.83m (6ft) of 1/2" hose and a 1/2" to 3/4" adapter. Radium says it works well with its charcoal canister kits.
Pairs Well With
Good to Know
- Needs an 8AN male vent fitting. The one supplied with the Radium FCST works
- For dry break and dump can systems, use the high-flow 12AN kit
- Run the hose up from the cell so fuel drains back, then briefly towards the front of the car to limit slosh
- Add vertical loops as expansion chambers, keeping the total height at about 305mm (12") or more. On remote-fill systems, the loops must sit above the fill point
- End the vent outside the cabin, below and behind the cell, and away from the exhaust
Vehicle Fitment
- Universal
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.