
Collapsible content
Description
Radium Fuel Cell Foam, One Piece
Suits: Radium RA-Series fuel cells; can be cut to suit any fuel cell or tank
Part Number: 18-0066
This is the same foam that comes pre-fitted in every Radium fuel cell. It works as baffling and explosion suppression in one: it stops fuel sloshing and aerating so the pickup stays fed, and it cuts down the vapour space in the cell. Radium notes the FIA mandates foam in fuel cells.
It's reticulated polyurethane to MIL-DTL-83054C Type II, at a nominal 15 pores per inch. Each piece displaces only 0.26L of fuel. Radium's testing with ethanol and methanol showed no deterioration, but alcohol may still shorten foam life, so check it more often if you're running E85 or methanol.
Pairs Well With
- Radium RA-Series 10 Gallon Fuel Cell
- Radium RA-Series 14 Gallon Fuel Cell
- Radium RA-Series 22 Gallon Fuel Cell
- Radium Fuel Cell 24-Bolt Weld Flange (20-0278)
Good to Know
- Inspect it after every race season and replace it at least every 3 seasons
- Inspect it more often when running ethanol or methanol
- The foam goes in through the 6in x 10in opening. Use your old foam as a cutting template
Vehicle Fitment
- Radium 6 gal fuel cell: 2 pieces, cut each end 126mm (4.95in) shorter
- Radium 10 gal fuel cell: 2 pieces, no cutting
- Radium 10.5 gal spare tyre fuel cell: 2 pieces, cut each into 3 sections
- Radium 14 gal fuel cell: 3 pieces, cut 1 piece in half lengthways
- Radium 22 gal fuel cell: 5 pieces, cut 1 piece in half lengthways
- Universal: can be cut to suit any fuel cell or tank
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.