
Collapsible content
Description
Radium Fluid Lock PCV Catch Can Kit, Mitsubishi Lancer Evolution X
Suits: Mitsubishi Lancer Evolution X (2008–2016), 4B11T
Part Number: 20-0105-FL
When the Evo X's PCV valve opens, crankcase vapour, unburnt fuel and oil sludge get drawn straight into the intake manifold. This kit puts a Fluid Lock can inline with the PCV hose to trap it all first. It mounts just behind the right-hand headlight and bolts in with no drilling.
The can is pressure sealed, so it can connect to the manifold at any boost level without a check valve. A normal catch can that's left too long can pour its contents back into the intake. Radium's patented Fluid Lock design stops the 207ml can overfilling and holds the oil until you empty it.
Pairs Well With
- Radium CCV Fluid Lock Catch Can Kit, Evo X (20-1106-FL)
- Radium Dual Fluid Lock Catch Can Kit, Evo X (20-1107-FL)
- Radium Catch Can Petcock Drain Kit (20-0024)
- Radium Fuel Pump Hanger, Evo X
Good to Know
- Some European models have a headlamp washer reservoir that gets in the way of the PCV can
- There's no fixed emptying interval. Check the dipstick from 3–4 weeks and repeat as needed. PCV cans usually collect more than CCV cans
- To empty, unscrew the lower reservoir, or fit the petcock drain kit where there's room
- Collecting a lot of oil can point to blow-by, overfilled oil, poor breather baffling or a PCV valve that doesn't close under load
Vehicle Fitment
- Mitsubishi Lancer Evolution X (2008–2016)
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.