
Collapsible content
Description
Radium AOS-R Air Oil Separator, Universal VTA
Suits: Universal, vent-to-atmosphere setups (not recommended for MAF engines)
Part Number: 20-0819
Like a catch can, the AOS-R keeps blow-by oil out of the intake, intercooler and manifold. Unlike a catch can, it sends the separated oil back to the sump, so there's nothing to empty. Engine coolant heats the unit to stop condensation, and a water trap around the bottom keeps moisture out of the oil.
This VTA version vents through a slotted, baffled top and has two side inlets, which suits V8s and other dual-bank engines with two crankcase vents. A big outlet chamber slows the air so oil drops out, and the billet body splits into three pieces for servicing.
Pairs Well With
Good to Know
- Not recommended for MAF engines, because the vent creates an air leak. Use the 20-0219 VTE version instead
- For a single-vent engine, plug one inlet with Radium 14-0351
- The engine needs a breather or return port high enough to keep oil from being drawn in, but low enough for a downhill hose back to the engine. The unit's bottom port must sit above the engine return port
- Coolant must be routed through the unit. In cold climates, insulate exposed hoses (sleeve not included)
- When it's working properly the unit is empty after sitting. Pull the dipstick to check if you suspect a blocked return
- 10AN ORB fittings and hoses are not included
Vehicle Fitment
- Universal (not recommended for MAF engines)
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.