
Collapsible content
Description
Radium Fluid Lock PCV Catch Can Kit, GM LS2 / LS3 / LS7 (Gen IV)
Suits: GM Gen IV LS2, LS3 and LS7, wet or dry sump
Part Number: 20-0785-FL
From 2004, GM swapped the PCV valve on Gen IV LS engines for a 2.5mm fixed orifice. A proper PCV valve keeps the crankcase under vacuum, keeps boost out of it, and stops a backfire lighting crankcase vapour. This kit puts one back, with a Fluid Lock can inline between the PCV valve and the intake manifold.
Because the factory orifice is restrictive, a baffled oil cap is included to pull as much blow-by as possible out of the crankcase. The can mounts on a bracket at the front right of the cylinder head with no drilling. It suits wet and dry sump engines.
Pairs Well With
- Radium Fluid Lock Catch Can Kit, GM LS1 / LS6 (20-0260-FL)
- Radium CCV Fluid Lock Catch Can Kit, Corvette C6 (20-0786-FL)
- Radium Catch Can Petcock Drain Kit (20-0024)
Good to Know
- Check you have clearance in the mounting area first. Some setups with extra belt-driven accessories, such as an aftermarket supercharger, may not fit
- For Gen III LS1 and LS6 engines, use 20-0260-FL instead
- On wet sump engines (e.g. LS3) the baffled cap sits above the right-hand engine cover. On dry sump engines (e.g. LS7) it sits underneath
- There's no fixed emptying interval. Check the dipstick after 3–4 weeks and repeat as needed
- Collecting a lot of oil can point to blow-by, an overfilled sump, poor breather baffling or a PCV valve leaking under load
Vehicle Fitment
- GM LS2 Gen IV
- GM LS3 Gen IV
- GM LS7 Gen IV
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.