
Collapsible content
Description
Radium Shrouded Fuel Level Sender, 0-90 Ohm, 8.0in
Suits: Radium FCST (20-099X-XX) and FCST-X (20-199X-XX) fuel cell surge tanks
Part Number: 20-0847-203
This is the 8.0in (203mm) shrouded sender Radium uses in its 6, 10 and 10.5 gallon spare tyre RA-Series fuel cells. It bolts into the standard SAE 5-bolt sender port on the newer FCST and FCST-X, and uses a sealed 304 stainless probe with a magnetic float.
It reads 0 ohm empty to 90 ohm full, which suits most aftermarket fuel gauges. It handles petrol, ethanol and methanol, so it works for street builds and race cars alike. It comes with the gasket, stainless bolts and a Deutsch DT 2-pin plug.
Pairs Well With
- Radium RA-Series 6 Gallon Fuel Cell
- Radium RA-Series 10 Gallon Fuel Cell
- Radium RA-Series 10.5 Gallon Spare Tyre Fuel Cell
- Radium FCST-X Fuel Cell Surge Tank
- Radium Shrouded Fuel Level Sender, 11.7in (20-0847-297)
- Radium Fuel Level Sensor Block-Off Kit (20-0146)
Good to Know
- Shrouded senders only fit the newer FCST (20-099X-XX) and FCST-X (20-199X-XX). The 40mm shroud needs a thru-hole at least that size
- Older FCST tanks (20-049X-XX and 20-069X-XX) need the non-shrouded 20-0747-XXX sender
- You need a 0-90 ohm gauge. Radium doesn't sell gauges
- If your factory gauge isn't compatible, a resistance signal converter (e.g. Classic Instruments SN34) may work, but Radium has no experience with them
- Senders bought with an FCST or FCST-X come pre-installed
- To test, measure resistance across the two wires while tipping the sender so the float moves
Vehicle Fitment
- Radium FCST fuel cell surge tanks 20-099X-XX
- Radium FCST-X fuel cell surge tanks 20-199X-XX
- Radium 6, 10 and 10.5 gallon spare tyre RA-Series fuel cells
Genuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email sales@radiumengineering.com.au and we'll confirm fitment.