{"title":"Universal Catch Cans \u0026 AOS","description":null,"products":[{"product_id":"radium-catch-can-petcock-drain-kit","title":"Radium Catch Can Petcock Drain Kit","description":"\u003ch2\u003eRadium Catch Can Petcock Drain Kit\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium catch cans, and any can or reservoir with a 4AN ORB drain port\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0024\u003c\/p\u003e\u003cp\u003eEmptying a catch can by unscrewing the body is easy on the bench, but not so easy when it's tucked behind the strut tower. This kit puts a ball valve on a length of hose off the bottom of the can, so you can drain it from wherever suits, even from under the car.\u003c\/p\u003e\u003cp\u003eThe anodised 4AN ORB barb fitting replaces the drain plug in the bottom of the can. Cut the hose to put the valve where you want it, then cut again after the valve to set your drain point. The valve is rated to 862 kPa (125 psi) at 60°C.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-universal-fluid-lock-catch-can-aos-single\"\u003eRadium Universal Fluid Lock Catch Can, Single (20-0008-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-catch-can-8an-kit-fluid-lock\"\u003eRadium Single Catch Can, 8AN Kit (20-1808-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-competition-catch-can\"\u003eRadium Competition Catch Can (20-1772)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCheck there's room to fit and route the hose and valve. Many vehicle-specific kits don't have space for it\u003c\/li\u003e\n\u003cli\u003eClamp both hoses at the valve with the included spring clamps. No clamp is needed at the catch can barb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll Radium Fluid Lock and standard (non-Fluid Lock) catch cans\u003c\/li\u003e\n\u003cli\u003eRadium VTE and VTA Competition Catch Cans\u003c\/li\u003e\n\u003cli\u003eAny can or reservoir with a 4AN ORB drain port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764920320302,"sku":"20-0024","price":52.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0024_2818c498-7325-4b4d-8f59-cd30b8854905.jpg?v=1792383210"},{"product_id":"radium-single-universal-catch-can-mounting-bracket","title":"Radium Single Universal Catch Can Mounting Bracket","description":"\u003ch2\u003eRadium Single Universal Catch Can Mounting Bracket\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e One Radium catch can, universal mounting\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 13-0008\u003c\/p\u003e\u003cp\u003eSwapped engines and custom builds rarely have a factory spot for a catch can. This billet bracket gives a single Radium can a solid home, with adjustable mounting positions to suit a tight engine bay.\u003c\/p\u003e\u003cp\u003eIt's CNC machined from billet aluminium, anodised, and comes with stainless hardware. You'll need to choose your own mounting point on the car.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-universal-fluid-lock-catch-can-aos-single\"\u003eRadium Universal Fluid Lock Catch Can, Single (20-0008-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-universal-catch-can-mounting-bracket\"\u003eRadium Dual Universal Catch Can Mounting Bracket (13-0005)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCatch can sold separately\u003c\/li\u003e\n\u003cli\u003eUniversal bracket, so it needs a custom installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal, suits Radium catch cans\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764920680750,"sku":"13-0008","price":31.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/13-0008.jpg?v=1792383211"},{"product_id":"radium-engineering-competition-catch-can-extension-upgrade","title":"Radium Engineering Competition Catch Can Extension Upgrade","description":"\u003ch2\u003eRadium Competition Catch Can Extension Upgrade\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium Competition Catch Cans 20-0072, 20-0772 and 20-1772\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0149\u003c\/p\u003e\u003cp\u003eIf your shorter Competition Catch Can is filling faster than you'd like, or you need to meet a 1 quart minimum, this extension lifts its capacity from 0.59L to 0.95L. The O-ring sealed aluminium section fits in the middle of your existing can, and a longer dipstick is included to suit.\u003c\/p\u003e\u003cp\u003eThe larger O-ring at the bottom grips the lower reservoir, so the extension and reservoir come off together as one piece when you empty it.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-competition-catch-can\"\u003eRadium Competition Catch Can (20-1772)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-competition-catch-can-vta-2-port-large-20-0772\"\u003eRadium Competition Catch Can, VTA, 2-Port, Large (20-0772)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-universal-competition-catch-can-short-version-without-extension\"\u003eRadium Universal Competition Catch Can, Short (20-0072)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoesn't fit Radium standard or Fluid Lock catch cans\u003c\/li\u003e\n\u003cli\u003eLubricate the O-rings with O-ring lube, petroleum jelly or engine oil before assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium VTE Competition Catch Can (20-0072)\u003c\/li\u003e\n\u003cli\u003eRadium VTA Competition Catch Can (20-0772)\u003c\/li\u003e\n\u003cli\u003eRadium Competition Catch Can, Large (20-1772)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764922253614,"sku":"20-0149","price":139.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0149_89b7e8fe-a711-432d-a6e7-256521240ae4.jpg?v=1792383219"},{"product_id":"radium-air-filter-0-75-id","title":"Radium Air Filter 0.75\" ID","description":"\u003ch2\u003eRadium Air Filter, 3\/4in (19mm) ID\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 3\/4in (19mm) hose barb\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 18-0042\u003c\/p\u003e\u003cp\u003eA small breather filter for vent-to-atmosphere crankcase setups and fuel cell vents. It slides over any 3\/4in barb and is held on with the included stainless clamp, which keeps dirt out of the vent without restricting it.\u003c\/p\u003e\u003cp\u003eThe pre-oiled, green synthetic media can be washed and reused. It has a polyurethane inlet, stainless end caps and a black zinc-plated finish.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-10an-orb-fitting-to-air-filter\"\u003eRadium 10AN ORB Fitting to Air Filter (20-0050)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-12an-female-fitting-to-air-filter\"\u003eRadium 12AN Female Fitting to Air Filter (20-0485)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-roll-over-valve-10an-orb-to-3-4-barb\"\u003eRadium Roll Over Valve, 10AN ORB to 3\/4in Barb (20-0594)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis version only fits a 3\/4in hose barb\u003c\/li\u003e\n\u003cli\u003eFor a 10AN ORB port (e.g. Radium baffled oil caps and catch cans), get the 20-0050 version with fitting\u003c\/li\u003e\n\u003cli\u003eFor a 12AN female fuel cell vent, get the 20-0485 version with fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal, any 3\/4in (19mm) hose barb\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764922417454,"sku":"18-0042","price":52.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/18-0042.jpg?v=1792383219"},{"product_id":"radium-dual-universal-catch-can-mounting-bracket","title":"Radium Dual Universal Catch Can Mounting Bracket","description":"\u003ch2\u003eRadium Dual Universal Catch Can Mounting Bracket\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Two Radium catch cans, universal mounting\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 13-0005\u003c\/p\u003e\u003cp\u003eRunning separate cans for the PCV and crankcase vent sides? This bracket holds two Radium cans side by side, so both sides sit together in one tidy spot in the engine bay.\u003c\/p\u003e\u003cp\u003eIt's CNC machined from billet aluminium and suits a wide range of mounting positions and orientations. That makes it handy for engine swaps and track cars where there's no factory mounting point.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-universal-catch-can-kit\"\u003eRadium Universal Fluid Lock Catch Can Kit, Dual (20-0005-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-universal-catch-can-mounting-bracket\"\u003eRadium Single Universal Catch Can Mounting Bracket (13-0008)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCatch cans sold separately\u003c\/li\u003e\n\u003cli\u003eUniversal bracket, so you choose the mounting point on the car\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal, suits two Radium catch cans\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764930412846,"sku":"13-0005","price":38.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/13-0005.jpg?v=1792383275"},{"product_id":"radium-engineering-pushlok-hose-end-6an-180deg","title":"Radium Engineering PushLok Hose End, 6AN, 180Deg","description":"\u003ch2\u003eRadium PushLok Hose End, 6AN 180°\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 3\/8\" PushLok-compatible rubber hose, incl. Radium PCV\/fuel hose and Radium EFI hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0205\u003c\/p\u003e\u003cp\u003eA reusable 6AN 180° PushLok hose end for 3\/8\" hose. There are no clamps: just lubricate the barbs and push the hose on. Black anodised aluminium, it suits Radium PCV\/fuel hose, Radium EFI hose and other PushLok-compatible rubber hose, and the assembly holds more than 800 psi. It's the quick, tidy way to plumb catch cans, breathers and low-pressure fuel lines.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-e85-safe-reinforced-pcv-fuel-hose-sold-per-foot\"\u003eRadium E85-Safe Reinforced PCV\/Fuel Hose, 6AN, Sold per Foot (20-HOSE-6AN)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the barbs, then push into the hose. No clamps needed\u003c\/li\u003e\n\u003cli\u003eFor PushLok-compatible rubber hose only, not PTFE\u003c\/li\u003e\n\u003cli\u003eSizing: 6AN suits 3\/8\", 8AN suits 1\/2\", 10AN suits 5\/8\", 12AN suits 3\/4\" hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764938670382,"sku":"14-0205","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0205.jpg?v=1792383336"},{"product_id":"radium-universal-fluid-lock-catch-can-aos-single","title":"Radium Universal Fluid Lock Catch Can\/AOS - Single","description":"\u003ch2\u003eRadium Universal Fluid Lock Catch Can, Single\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any engine with a PCV or crankcase breather\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0008-FL\u003c\/p\u003e\u003cp\u003eOil mist from the crankcase coats the intake, intercooler and throttle body over time, and on a boosted or high-revving engine it adds up fast. This billet can sits in the breather line and pulls the oil out before it reaches the intake. Radium's patented Fluid Lock design stops the can overfilling and holds what it collects, so oil can't spill back into the engine if you forget to empty it.\u003c\/p\u003e\u003cp\u003eIt's machined from 6061 aluminium with O-ring sealed halves and ports, so it's fine under boost. The 10AN ORB inlet and outlet take barb or AN fittings, which makes it a good base for a custom setup when there's no bolt-in kit for your car. It comes with a single universal bracket. Fittings and hose are sold separately.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-catch-can-8an-kit-fluid-lock\"\u003eRadium Single Catch Can, 8AN Kit, Fluid Lock (20-1808-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-10an-orb-fitting-to-air-filter\"\u003eRadium 10AN ORB Fitting to Air Filter (20-0050)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied without fittings. 10AN ORB adapters and hose are sold separately (barb fittings with spring clamps, or AN fittings with push-lock hose ends). For a complete kit, see the 6AN, 8AN or 10AN single can kits\u003c\/li\u003e\n\u003cli\u003eSome engines need more than one can, depending on the PCV system\u003c\/li\u003e\n\u003cli\u003eDon't use with aftermarket crankcase vacuum pumps\u003c\/li\u003e\n\u003cli\u003eDrain regularly and check the level with the dipstick. Collecting a lot of oil can point to engine problems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764939587886,"sku":"20-0008-FL","price":296.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0008-FL_e52ea22f-d598-425a-8dfe-265e785ae4a6.jpg?v=1792383340"},{"product_id":"radium-dual-fluid-lock-universal-catch-can-kit","title":"Radium Dual Fluid Lock Universal Catch Can Kit","description":"\u003ch2\u003eRadium Universal Fluid Lock Catch Can Kit, Dual\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, engines that need separate PCV and crankcase vent cans\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0005-FL\u003c\/p\u003e\u003cp\u003eMany engines vent oil from two places: the PCV side under vacuum and the crankcase breather under boost. This kit puts two billet Fluid Lock cans side by side on one universal bracket, so both sides are caught before oil reaches the intake, intercooler or throttle body. The patented Fluid Lock design stops each can overfilling and holds what it collects until you empty it.\u003c\/p\u003e\u003cp\u003eEach can is machined from 6061 aluminium with O-ring sealed halves and ports, so it's fine under boost. It has 10AN ORB inlets and outlets for barb or AN fittings, plus a dipstick for quick level checks. Fittings and hose are sold separately.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-10an-orb-fitting-to-air-filter\"\u003eRadium 10AN ORB Fitting to Air Filter (20-0050)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-universal-fluid-lock-catch-can-aos-single\"\u003eRadium Universal Fluid Lock Catch Can, Single (20-0008-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied without fittings. 10AN ORB adapters and hose are sold separately (barb fittings with spring clamps, or AN fittings with push-lock hose ends)\u003c\/li\u003e\n\u003cli\u003eDon't use with aftermarket crankcase vacuum pumps\u003c\/li\u003e\n\u003cli\u003eDrain regularly and check the level with the dipstick. Collecting a lot of oil can point to engine problems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764939620654,"sku":"20-0005-FL","price":576.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0005-FL_3279629f-d1b2-4934-8bc8-0d88c93e46ea.jpg?v=1792383340"},{"product_id":"radium-10an-orb-fitting-to-air-filter","title":"Radium 10AN ORB Fitting to Air Filter","description":"\u003ch2\u003eRadium 10AN ORB to Air Filter Fitting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB port including Radium catch cans\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0050\u003c\/p\u003e\u003cp\u003eThreads into any 10AN ORB port and gives you a mount for an air filter. ORB ports are used on most Radium products, including the inlet and outlet ports on Radium catch cans, so it's an easy way to vent a can to atmosphere. ORB threads don't seal on the thread. The supplied FKM O-ring does the sealing, so no thread sealant is needed.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the O-ring with petroleum jelly, O-ring lube or engine oil before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use PTFE paste or thread sealant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764950532398,"sku":"20-0050","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0050.jpg?v=1792383395"},{"product_id":"radium-10an-orb-to-bosch-044-check-valve-adapter","title":"Radium 10AN ORB to Bosch 044 Check Valve Adapter","description":"\u003ch2\u003eRadium 10AN ORB to Bosch 044 Check Valve Adapter\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Bosch 0 580 254 044 external fuel pump\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0259\u003c\/p\u003e\u003cp\u003eAn outlet adapter for the popular Bosch 044 that keeps the check valve supplied with the pump. A crush washer seals the adapter to the check valve, and the outlet takes a 10AN ORB fitting, ready for an AN feed line.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0196-6an-male-flare-to-m12x1-5mm-male-fitting\"\u003eRadium 6AN Male Flare to M12x1.5mm Male (14-0196)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0130-10an-orb-to-6an-male-flare-fitting\"\u003eRadium 10AN ORB to 6AN Male Flare (14-0130)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds a 10AN ORB fitting in the outlet (sold separately)\u003c\/li\u003e\n\u003cli\u003eBosch pump and check valve not included\u003c\/li\u003e\n\u003cli\u003eTo delete the Bosch check valve instead, use the 14-0196\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBosch 0 580 254 044 fuel pump\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764953317678,"sku":"20-0259","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0259.jpg?v=1792383398"},{"product_id":"radium-air-oil-separator-universal-kit","title":"Radium Air Oil Separator - Universal Kit","description":"\u003ch2\u003eRadium AOS-R Air Oil Separator, Universal VTE Kit\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, engines with a suitable crankcase breather or return port\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0219\u003c\/p\u003e\u003cp\u003eHigh-output engines can make more blow-by than a catch can can keep up with. The AOS-R separates the oil out of the crankcase vapour and returns it to the sump above the oil level, so there's nothing to empty. Engine coolant runs through a heating chamber to stop condensation building up inside, and a water trap stops moisture reaching the sump. That makes it a good fit for street cars that see short trips and cold mornings as well as track work.\u003c\/p\u003e\u003cp\u003eThis is the vent-to-engine version: top inlet, side outlet back to the intake or turbo inlet pipe. Radium recommends it for engines with a MAF sensor. It splits into three billet pieces for servicing, and the mount rotates 360°.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-aos-r-universal-vta-vent-to-atmosphere\"\u003eRadium AOS-R, Universal VTA (20-0819)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-aos-r-air-oil-separator-return-kit-subaru-wrx-2008-2014-sti-2015-2021-forester-xt-2009-2013\"\u003eRadium AOS-R Kit, Subaru WRX \/ STI \/ Forester XT (20-0607)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0351-10an-orb-plug-round-internal-hex\"\u003eRadium 10AN ORB Plug (14-0351)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe engine needs a breather or return port high enough that oil isn't drawn from the sump, but low enough to connect to the AOS-R bottom port\u003c\/li\u003e\n\u003cli\u003eMount the AOS-R so its bottom port sits above the engine return port, with the return hose running downhill\u003c\/li\u003e\n\u003cli\u003eCoolant must be routed through the unit to prevent condensation\u003c\/li\u003e\n\u003cli\u003eInsulating sleeve (not included) is recommended on hoses exposed to cold air\u003c\/li\u003e\n\u003cli\u003e10AN ORB fittings for the inlet, outlet and return are sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764954988846,"sku":"20-0219","price":524.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0219_a2aa249d-e41e-4cef-a7d1-fed720a1b3f7.jpg?v=1792383406"},{"product_id":"radium-roll-over-valve-10an-orb-to-3-4-barb","title":"Radium Roll Over Valve, 10AN ORB To 3\/4\" Barb","description":"\u003ch2\u003eRadium Roll Over Valve, 10AN ORB to 3\/4in Barb\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Engine vents and catch cans with a 10AN ORB female top port\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0594\u003c\/p\u003e\u003cp\u003eA vent-to-atmosphere breather is fine until the car ends up on its roof. Then it dumps oil everywhere. This valve vents freely both ways while upright, then shuts off completely once it's tipped past 90°, keeping oil contained if the car rolls. It's worth fitting for any track or rally car running a VTA setup.\u003c\/p\u003e\u003cp\u003eIt screws into a 10AN ORB port with an FKM O-ring seal and has a 3\/4in barb on top for the Radium 18-0042 air filter. The internals are stainless and the body is anodised 6061.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-air-filter-0-75-id\"\u003eRadium Air Filter, 3\/4in ID (18-0042)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-10an-orb-fitting-to-air-filter\"\u003eRadium 10AN ORB Fitting to Air Filter (20-0050)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMust be mounted vertically, upright, to work\u003c\/li\u003e\n\u003cli\u003eSuits Radium standard (non-Fluid Lock) catch cans and other cans with 10AN ORB female top outlets\u003c\/li\u003e\n\u003cli\u003eNot for Radium Fluid Lock cans or cans with side outlets. Use 20-0050 instead\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal, 10AN ORB female top ports\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764976877870,"sku":"20-0594","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0594.jpg?v=1792383525"},{"product_id":"radium-catch-can-o-ring-service-kit","title":"Radium Catch Can O-Ring Service Kit","description":"\u003ch2\u003eRadium Catch Can O-Ring Service Kit\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium standard catch cans\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0057\u003c\/p\u003e\u003cp\u003eThe O-rings are what keep a Radium can sealed under boost, and they're the one part that wears with use. This kit has everything for a full reseal: two dipstick O-rings and two canister O-rings.\u003c\/p\u003e\u003cp\u003eIt's worth having on the shelf for a pre-season service, or whenever the can's been opened a lot. Lubricate all O-rings when fitting them.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-universal-fluid-lock-catch-can-aos-single\"\u003eRadium Universal Fluid Lock Catch Can, Single (20-0008-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits Radium standard catch cans only\u003c\/li\u003e\n\u003cli\u003eDoesn't suit the Radium AOS-R or the large Competition Catch Can\u003c\/li\u003e\n\u003cli\u003eLubricate all O-rings during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium standard catch cans\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765000208686,"sku":"20-0057","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0057.jpg?v=1792383647"},{"product_id":"radium-engineering-10an-orb-to-6an-orb-swivel-union","title":"Radium Engineering 10AN ORB to 6AN ORB Swivel Union","description":"\u003ch2\u003eRadium 10AN ORB to 6AN ORB Swivel Union\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, joining a 10AN ORB port to a 6AN ORB port\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1006\u003c\/p\u003e\u003cp\u003eJoins a 10AN ORB (O-ring boss) port to a 6AN ORB port, so you can connect ORB-ported parts like rails, regulators, filters and surge tanks directly, or step between sizes. It's anodised billet aluminium with FKM O-rings that suit all fuels and oils.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-6an-8an-10an-orb-fkm-o-ring-multi-pack\"\u003eRadium ORB FKM O-Ring Multi Pack, 6AN \/ 8AN \/ 10AN (18-0043)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the O-rings with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eORB threads don't seal, so don't use thread sealant\u003c\/li\u003e\n\u003cli\u003eConfirm the port sizes in your application before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009809710,"sku":"20-1006","price":52.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1006_2cba9365-dcda-4f15-878b-8edaa93e43f9.jpg?v=1792383708"},{"product_id":"radium-engineering-aos-r-universal-vta-vent-to-atmosphere","title":"Radium Engineering AOS-R - Universal VTA (Vent to Atmosphere)","description":"\u003ch2\u003eRadium AOS-R Air Oil Separator, Universal VTA\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, vent-to-atmosphere setups (not recommended for MAF engines)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0819\u003c\/p\u003e\u003cp\u003eLike a catch can, the AOS-R keeps blow-by oil out of the intake, intercooler and manifold. Unlike a catch can, it sends the separated oil back to the sump, so there's nothing to empty. Engine coolant heats the unit to stop condensation, and a water trap around the bottom keeps moisture out of the oil.\u003c\/p\u003e\u003cp\u003eThis VTA version vents through a slotted, baffled top and has two side inlets, which suits V8s and other dual-bank engines with two crankcase vents. A big outlet chamber slows the air so oil drops out, and the billet body splits into three pieces for servicing.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-air-oil-separator-universal-kit\"\u003eRadium AOS-R Universal VTE Kit (20-0219)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0351-10an-orb-plug-round-internal-hex\"\u003eRadium 10AN ORB Plug (14-0351)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot recommended for MAF engines, because the vent creates an air leak. Use the 20-0219 VTE version instead\u003c\/li\u003e\n\u003cli\u003eFor a single-vent engine, plug one inlet with Radium 14-0351\u003c\/li\u003e\n\u003cli\u003eThe engine needs a breather or return port high enough to keep oil from being drawn in, but low enough for a downhill hose back to the engine. The unit's bottom port must sit above the engine return port\u003c\/li\u003e\n\u003cli\u003eCoolant must be routed through the unit. In cold climates, insulate exposed hoses (sleeve not included)\u003c\/li\u003e\n\u003cli\u003eWhen it's working properly the unit is empty after sitting. Pull the dipstick to check if you suspect a blocked return\u003c\/li\u003e\n\u003cli\u003e10AN ORB fittings and hoses are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal (not recommended for MAF engines)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009875246,"sku":"20-0819","price":558.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0819_86210f6a-c1a9-47e4-bb87-b4f94b4e0ce5.jpg?v=1792383709"},{"product_id":"radium-o-ring-service-kit","title":"Radium O-Ring Service Kit","description":"\u003ch2\u003eRadium AOS-R O-Ring Service Kit\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium AOS-R air oil separators – universal VTE \/ VTA and vehicle-specific kits\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0685\u003c\/p\u003e\u003cp\u003eAn AOS-R does its job quietly for years, but any time you pull it apart – to clean it out, move it to a new engine bay or check it over between seasons – the O-rings should be replaced so it reseals properly. This kit has every commonly replaced O-ring for the AOS-R body, dipstick, water passage plate and coolant fittings in one pack.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-air-oil-separator-universal-kit\"\u003eRadium Air Oil Separator, Universal Kit (20-0219)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-aos-r-universal-vta-vent-to-atmosphere\"\u003eRadium AOS-R Universal VTA, Vent to Atmosphere (20-0819)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-aos-r-air-oil-separator-return-kit-subaru-wrx-2008-2014-sti-2015-2021-forester-xt-2009-2013\"\u003eRadium AOS-R Kit – Subaru WRX \/ STI \/ Forester XT (20-0607)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFor Radium AOS-R units only. Radium Competition Catch Cans use the separate 20-0684 CCC O-ring kit.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium Universal AOS-R, VTE (20-0219)\u003c\/li\u003e\n\u003cli\u003eRadium Universal AOS-R, VTA (20-0819)\u003c\/li\u003e\n\u003cli\u003eRadium AOS-R Kit, Subaru 2002–2021 (20-0607)\u003c\/li\u003e\n\u003cli\u003eRadium AOS-R Kit, 2015–2021 WRX and 2014–2018 Forester XT (20-0258-00)\u003c\/li\u003e\n\u003cli\u003eRadium AOS-R Kit, 86 \/ BRZ \/ FR-S (20-0351)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765010628910,"sku":"20-0685","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0685.jpg?v=1792383710"},{"product_id":"radium-single-catch-can-6an-kit-fluid-lock","title":"Radium Single Catch Can, 6An Kit, Fluid Lock","description":"\u003ch2\u003eRadium Universal Single Catch Can Kit, 6AN, Fluid Lock\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, engines with 3\/8in (9.5mm) ID breather hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1806-FL\u003c\/p\u003e\u003cp\u003eIf Radium doesn't make a bolt-in kit for your engine, this is the next best thing: a complete catch can setup in one box. You get the Fluid Lock can, a mounting bracket, 3m of PCV hose and 6AN fittings with straight, 45° and 90° PushLok ends, so you can plumb it neatly around whatever's in your engine bay.\u003c\/p\u003e\u003cp\u003eThe patented Fluid Lock design stops the 207ml can overfilling. If it fills and isn't emptied, an internal valve closes to keep oil out of the engine while normal venting carries on. The can is billet 6061 with O-ring seals, so it's fine under boost. Measure your breather fittings to pick the right kit size: this one suits 3\/8in ID hose.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-catch-can-8an-kit-fluid-lock\"\u003eRadium Single Catch Can, 8AN Kit (20-1808-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-catch-can-10an-kit-fluid-lock\"\u003eRadium Single Catch Can, 10AN Kit (20-1810-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSome engines need more than one can, depending on the PCV system\u003c\/li\u003e\n\u003cli\u003eNot designed for aftermarket crankcase vacuum pumps\u003c\/li\u003e\n\u003cli\u003eNot every fitting will be used on every install. Extra fittings are sold separately\u003c\/li\u003e\n\u003cli\u003eTo drain, unscrew the lower half of the can, or use the plugged 4AN ORB drain port where space is tight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal, 3\/8in (9.5mm) ID breather hose\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765017248046,"sku":"20-1806-FL","price":489.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1806-FL.jpg?v=1792383763"},{"product_id":"radium-single-catch-can-10an-kit-fluid-lock","title":"Radium Single Catch Can, 10An Kit, Fluid Lock","description":"\u003ch2\u003eRadium Universal Single Catch Can Kit, 10AN, Fluid Lock\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, engines with 5\/8in (15.9mm) ID breather hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1810-FL\u003c\/p\u003e\u003cp\u003eIf Radium doesn't make a bolt-in kit for your engine, this is the next best thing: a complete catch can setup in one box. You get the Fluid Lock can, a mounting bracket, 3m of PCV hose and 10AN fittings with straight, 60° and 90° PushLok ends. The larger 10AN size suits big V8s and engines with high blow-by.\u003c\/p\u003e\u003cp\u003eThe patented Fluid Lock design stops the 207ml can overfilling. If it fills and isn't emptied, an internal valve closes to keep oil out of the engine while normal venting carries on. The can is billet 6061 with O-ring seals, so it's fine under boost. Measure your breather fittings to pick the right kit size: this one suits 5\/8in ID hose.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-catch-can-6an-kit-fluid-lock\"\u003eRadium Single Catch Can, 6AN Kit (20-1806-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-catch-can-8an-kit-fluid-lock\"\u003eRadium Single Catch Can, 8AN Kit (20-1808-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSome engines need more than one can, depending on the PCV system\u003c\/li\u003e\n\u003cli\u003eNot designed for aftermarket crankcase vacuum pumps\u003c\/li\u003e\n\u003cli\u003eNot every fitting will be used on every install. Extra fittings are sold separately\u003c\/li\u003e\n\u003cli\u003eTo drain, unscrew the lower half of the can, or use the plugged 4AN ORB drain port where space is tight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal, 5\/8in (15.9mm) ID breather hose\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765017575726,"sku":"20-1810-FL","price":524.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1810-FL.jpg?v=1792383764"},{"product_id":"radium-single-catch-can-8an-kit-fluid-lock","title":"Radium Single Catch Can, 8An Kit, Fluid Lock","description":"\u003ch2\u003eRadium Universal Single Catch Can Kit, 8AN, Fluid Lock\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, engines with 1\/2in (12.7mm) ID breather hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1808-FL\u003c\/p\u003e\u003cp\u003eIf Radium doesn't make a bolt-in kit for your engine, this is the next best thing: a complete catch can setup in one box. You get the Fluid Lock can, a mounting bracket, 3m of PCV hose and 8AN fittings with straight, 45° and 90° PushLok ends, so you can plumb it neatly around whatever's in your engine bay.\u003c\/p\u003e\u003cp\u003eThe patented Fluid Lock design stops the 207ml can overfilling. If it fills and isn't emptied, an internal valve closes to keep oil out of the engine while normal venting carries on. The can is billet 6061 with O-ring seals, so it's fine under boost. Measure your breather fittings to pick the right kit size: this one suits 1\/2in ID hose.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-catch-can-6an-kit-fluid-lock\"\u003eRadium Single Catch Can, 6AN Kit (20-1806-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-catch-can-10an-kit-fluid-lock\"\u003eRadium Single Catch Can, 10AN Kit (20-1810-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSome engines need more than one can, depending on the PCV system\u003c\/li\u003e\n\u003cli\u003eNot designed for aftermarket crankcase vacuum pumps\u003c\/li\u003e\n\u003cli\u003eNot every fitting will be used on every install. Extra fittings are sold separately\u003c\/li\u003e\n\u003cli\u003eTo drain, unscrew the lower half of the can, or use the plugged 4AN ORB drain port where space is tight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal, 1\/2in (12.7mm) ID breather hose\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765018001710,"sku":"20-1808-FL","price":506.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1808-FL.jpg?v=1792383763"},{"product_id":"radium-vta-to-vte-competition-catch-can-adapter-10an-orb","title":"Radium VTA to VTE Competition Catch Can Adapter 10AN ORB","description":"\u003ch2\u003eRadium VTA to VTE Competition Catch Can Adapter, 10AN ORB\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium VTA Competition Catch Cans 20-0771 and 20-0772\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1773\u003c\/p\u003e\u003cp\u003eGot an older VTA Competition Catch Can and want to close the system up? This plate converts it to a dual inlet, dual outlet VTE can like the current models, so clean air goes back to the intake instead of out a filter. Remove the top three screws, swap the VTA plate for the VTE plate and gasket, and you've got two extra 10AN ORB ports.\u003c\/p\u003e\u003cp\u003eThe top and side ports can be used as inlets or outlets. Just keep both inlets on the same side and both outlets on the same side.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-competition-catch-can-vta-2-port-extra-large-20-0771\"\u003eRadium Competition Catch Can, VTA, 2-Port, X-Large (20-0771)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-competition-catch-can-vta-2-port-large-20-0772\"\u003eRadium Competition Catch Can, VTA, 2-Port, Large (20-0772)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0351-10an-orb-plug-round-internal-hex\"\u003eRadium 10AN ORB Plug (14-0351)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't buy this for a 20-1771 or 20-1772. The adapter already comes with those\u003c\/li\u003e\n\u003cli\u003eA PCV valve is sold separately and must flow towards the intake manifold. An OEM PCV valve only works if it's factory fitted to the intake manifold. If it's on the breather or valve cover, fit a PCV valve at the can\u003c\/li\u003e\n\u003cli\u003eAdapter fittings and thread locker are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium VTA Competition Catch Can 20-0771\u003c\/li\u003e\n\u003cli\u003eRadium VTA Competition Catch Can 20-0772\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765018788142,"sku":"20-1773","price":61.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1773.webp?v=1792383768"},{"product_id":"radium-engineering-competition-catch-can","title":"Radium Engineering Competition Catch Can","description":"\u003ch2\u003eRadium Competition Catch Can, Large \/ X-Large\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any engine, vent-to-atmosphere (VTA) or vent-to-engine (VTE)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1772 (Large), 20-1771 (X-Large)\u003c\/p\u003e\u003cp\u003eA big-power engine makes more blow-by than a small can can deal with. Radium's Competition Catch Can is the high-capacity option, and it can run either way. It ships as VTA, where an oversized outlet slows the airflow so vapour drops out and an internal diffuser stops oil spraying around the engine bay. Remove three screws and fit the included VTE top plate, and you get two extra 10AN ORB ports to run it as a dual inlet, dual outlet can feeding clean air back to the intake.\u003c\/p\u003e\u003cp\u003eDual-stage condensing media in the inlet and outlet catches oil without restricting flow. The X-Large holds 0.9L, which meets the 1 quart minimum many sanctioning bodies require, so check your category rules before choosing a size. The body unscrews to drain, there's a dipstick for level checks, and the bracket rotates a full 360°.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0351-10an-orb-plug-round-internal-hex\"\u003eRadium 10AN ORB Plug, Round Internal Hex (14-0351)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-competition-catch-can-extension-upgrade\"\u003eRadium Competition Catch Can Extension Upgrade (20-0149)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-10an-orb-fitting-to-air-filter\"\u003eRadium 10AN ORB Fitting to Air Filter (20-0050)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSold without fittings. 10AN ORB adapters, PCV hose and the petcock drain kit are sold separately\u003c\/li\u003e\n\u003cli\u003eNot designed for aftermarket crankcase vacuum pumps\u003c\/li\u003e\n\u003cli\u003eVTE with PCV: a Radium PCV valve (sold separately) must flow towards the intake manifold. An OEM PCV valve only works if it's factory fitted to the intake manifold. If it's on the breather or valve cover, fit a PCV valve at the can\u003c\/li\u003e\n\u003cli\u003eSome engines need more than one can, depending on the PCV system\u003c\/li\u003e\n\u003cli\u003eThe 20-0149 extension suits the Large (20-1772) and takes it to about 0.95L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Large","offer_id":67765025636654,"sku":"20-1772","price":489.99,"currency_code":"AUD","in_stock":true},{"title":"X-Large","offer_id":67765025669422,"sku":"20-1771","price":576.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1771_1200px_wide.webp?v=1792383825"},{"product_id":"radium-10an-orb-to-m16x1-5mm-male-fitting","title":"Radium 10AN ORB to M16x1.5mm Male Fitting","description":"\u003ch2\u003eRadium 10AN ORB to M16x1.5mm Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB (7\/8\"-14) port incl. Radium rails, surge tanks, filters and regulators\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0341\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and gives you an M16x1.5mm male, for connecting OEM metric fittings, sensors or banjo bolts to an ORB port. It suits any 10AN ORB (7\/8\"-14) port. The thread doesn't seal; the FKM O-ring does, so no sealant is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003cli\u003eMetric male threads seal on a crush washer or the mating seat. Check your port before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765052375342,"sku":"14-0341","price":25.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0341.jpg?v=1792384022"},{"product_id":"radium-10an-orb-to-750-sae-male-fitting","title":"Radium 10AN ORB to .750\" SAE Male Fitting","description":"\u003ch2\u003eRadium 10AN ORB to .750\" SAE Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB (7\/8\"-14) port incl. Radium rails, surge tanks, filters and regulators\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0749\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and gives you a .750\" SAE male quick connect, so an OEM-style quick connect fuel line can click straight on. It suits any 10AN ORB (7\/8\"-14) port. The thread doesn't seal; the FKM O-ring does, so no sealant is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003cli\u003eCheck the size by measuring the OD of the male fitting: 5\/16\" = 7.94mm, 3\/8\" = 9.53mm, 1\/2\" = 12.7mm, 5\/8\" = 15.88mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765058601262,"sku":"14-0749","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0749.jpg?v=1792384072"},{"product_id":"radium-10an-orb-bulkhead-5-8-sae-male-to-5-8-sae-male","title":"Radium 10AN ORB Bulkhead, 5\/8\" SAE Male to 5\/8\" SAE Male","description":"\u003ch2\u003eRadium 10AN ORB Bulkhead, 5\/8\" SAE Male to 5\/8\" SAE Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium fuel hangers and surge tanks, or any 10AN ORB threaded surface\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0754\u003c\/p\u003e\u003cp\u003eA 10AN ORB bulkhead fitting with a 5\/8\" SAE male on one side and a 5\/8\" SAE male on the other. It threads into a Radium hanger, surge tank or any ORB-threaded surface, so in-tank hose or OEM-style lines can connect through to the outside. The ORB thread doesn't seal; the FKM O-ring does.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-6an-8an-10an-orb-fkm-o-ring-multi-pack\"\u003eRadium ORB FKM O-Ring Multi Pack, 6AN \/ 8AN \/ 10AN (18-0043)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765058666798,"sku":"14-0754","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0754_1200px_wide.jpg?v=1792384072"},{"product_id":"radium-10an-orb-to-m14x1-5mm-inverted-flare-fitting","title":"Radium 10AN ORB to M14x1.5mm Inverted Flare Fitting","description":"\u003ch2\u003eRadium 10AN ORB to M14x1.5mm Inverted Flare\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB (7\/8\"-14) port incl. Radium rails, surge tanks, filters and regulators\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0921\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and gives you an M14x1.5mm inverted flare, so an OEM inverted flare hard line can connect directly to an ORB port. It suits any 10AN ORB (7\/8\"-14) port. The thread doesn't seal; the FKM O-ring does, so no sealant is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765058699566,"sku":"14-0921","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0921_1200px_wide.jpg?v=1792384072"},{"product_id":"radium-pushlok-hose-end-12an-60","title":"Radium PushLok Hose End, 12AN, 60°","description":"\u003ch2\u003eRadium PushLok Hose End, 12AN 60°\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 3\/4\" PushLok-compatible rubber hose, incl. Radium PCV\/fuel hose and Radium EFI hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-1260\u003c\/p\u003e\u003cp\u003eA reusable 12AN 60° PushLok hose end for 3\/4\" hose. There are no clamps: just lubricate the barbs and push the hose on. Black anodised aluminium, it suits Radium PCV\/fuel hose, Radium EFI hose and other PushLok-compatible rubber hose, and the assembly holds more than 800 psi. It's the quick, tidy way to plumb catch cans, breathers and low-pressure fuel lines.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-e85-safe-reinforced-pcv-fuel-hose-sold-per-foot\"\u003eRadium E85-Safe Reinforced PCV\/Fuel Hose, 12AN, Sold per Foot (20-HOSE-12AN)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the barbs, then push into the hose. No clamps needed\u003c\/li\u003e\n\u003cli\u003eFor PushLok-compatible rubber hose only, not PTFE\u003c\/li\u003e\n\u003cli\u003eSizing: 6AN suits 3\/8\", 8AN suits 1\/2\", 10AN suits 5\/8\", 12AN suits 3\/4\" hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765058994478,"sku":"14-1260","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-1260.jpg?v=1792384075"},{"product_id":"radium-10an-orb-to-10mm-sae-male-fitting","title":"Radium 10AN ORB to 10mm SAE Male Fitting","description":"\u003ch2\u003eRadium 10AN ORB to 10mm SAE Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB (7\/8\"-14) port incl. Radium rails, surge tanks, filters and regulators\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0839\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and gives you a 10mm SAE male quick connect, so an OEM-style quick connect fuel line can click straight on. It suits any 10AN ORB (7\/8\"-14) port. The thread doesn't seal; the FKM O-ring does, so no sealant is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003cli\u003eCheck the size by measuring the OD of the male fitting: 5\/16\" = 7.94mm, 3\/8\" = 9.53mm, 1\/2\" = 12.7mm, 5\/8\" = 15.88mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765059813678,"sku":"14-0839","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0839.jpg?v=1792384082"},{"product_id":"radium-10an-orb-to-12an-male-fitting","title":"Radium 10AN ORB to 12AN Male Fitting","description":"\u003ch2\u003eRadium 10AN ORB to 12AN Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB (7\/8\"-14) port incl. Radium rails, surge tanks, filters and regulators\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0934\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and gives you a 12AN male, so you can run AN hose ends straight off the port. It suits any 10AN ORB (7\/8\"-14) port. The thread doesn't seal; the FKM O-ring does, so no sealant is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003cli\u003eAN flare connections go together dry and clean. Hand tighten until seated, then a further 1\/4 to 1\/2 turn\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765059911982,"sku":"14-0934","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0934.jpg?v=1792384082"},{"product_id":"radium-16an-orb-male-to-10an-orb-female-coupler","title":"Radium 16AN ORB Male to 10AN ORB Female Coupler","description":"\u003ch2\u003eRadium 16AN ORB Male to 10AN ORB Female Fitting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 16AN and 10AN ORB ports and fittings\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0698\u003c\/p\u003e\u003cp\u003eAdapts between 16AN ORB (1-5\/16\"-12) and 10AN ORB (7\/8\"-14) O-ring boss connections, so you can step port sizes on rails, regulators, surge tanks and blocks without extra adapters. It's anodised aluminium with FKM O-ring sealing that suits all fuels and oils.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-6an-8an-10an-orb-fkm-o-ring-multi-pack\"\u003eRadium ORB FKM O-Ring Multi Pack, 6AN \/ 8AN \/ 10AN (18-0043)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765059977518,"sku":"14-0698","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0698.jpg?v=1792384083"},{"product_id":"radium-10an-orb-to-m12x1-25mm-female-fitting","title":"Radium 10AN ORB to M12x1.25mm Female Fitting","description":"\u003ch2\u003eRadium 10AN ORB to M12x1.25mm Female\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB (7\/8\"-14) port incl. Radium rails, surge tanks, filters and regulators\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0930\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and gives you an M12x1.25mm female, for connecting OEM metric fittings, sensors or banjo bolts to an ORB port. It suits any 10AN ORB (7\/8\"-14) port. The thread doesn't seal; the FKM O-ring does, so no sealant is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765060075822,"sku":"14-0930","price":25.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0930_1200px_wide.jpg?v=1792384084"},{"product_id":"radium-10an-orb-to-m12x1-5mm-female-fitting","title":"Radium 10AN ORB to M12x1.5mm Female Fitting","description":"\u003ch2\u003eRadium 10AN ORB to M12x1.5mm Female\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB (7\/8\"-14) port incl. Radium rails, surge tanks, filters and regulators\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0920\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and gives you an M12x1.5mm female, for connecting OEM metric fittings, sensors or banjo bolts to an ORB port. It suits any 10AN ORB (7\/8\"-14) port. The thread doesn't seal; the FKM O-ring does, so no sealant is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765062697262,"sku":"14-0920","price":25.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0920_1200px_wide.jpg?v=1792384084"},{"product_id":"radium-10an-orb-to-16mm-sae-male-fitting","title":"Radium 10AN ORB to 16mm SAE Male Fitting","description":"\u003ch2\u003eRadium 10AN ORB to 16mm SAE Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB (7\/8\"-14) port incl. Radium rails, surge tanks, filters and regulators\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0739\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and gives you a 16mm SAE male quick connect, so an OEM-style quick connect fuel line can click straight on. It suits any 10AN ORB (7\/8\"-14) port. The thread doesn't seal; the FKM O-ring does, so no sealant is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eDon't use thread sealant on ORB threads\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003cli\u003eCheck the size by measuring the OD of the male fitting: 5\/16\" = 7.94mm, 3\/8\" = 9.53mm, 1\/2\" = 12.7mm, 5\/8\" = 15.88mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765062762798,"sku":"14-0739","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0739.jpg?v=1792384087"},{"product_id":"radium-20-1000-101010-low-profile-swivel-banjo-fitting-10an-orb-to-dual-10an-male","title":"Radium 20-1000-101010 Low Profile Swivel Banjo Fitting, 10AN ORB to Dual 10AN Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to Dual 10AN Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-101010\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to two 10AN male outlets, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eAN flare connections go together dry and clean. Hand tighten until seated, then a further 1\/4 to 1\/2 turn\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065974062,"sku":"20-1000-101010","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-101010.jpg?v=1792384138"},{"product_id":"radium-20-1000-1006-low-profile-swivel-banjo-fitting-10an-orb-to-6an-male","title":"Radium 20-1000-1006 Low Profile Swivel Banjo Fitting, 10AN ORB to 6AN Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 6AN Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1006\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 6AN male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eAN flare connections go together dry and clean. Hand tighten until seated, then a further 1\/4 to 1\/2 turn\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765066039598,"sku":"20-1000-1006","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1006.jpg?v=1792384138"},{"product_id":"radium-20-1000-1012-low-profile-swivel-banjo-fitting-10an-orb-to-12an-male","title":"Radium 20-1000-1012 Low Profile Swivel Banjo Fitting, 10AN ORB to 12AN Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 12AN Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1012\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 12AN male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eAN flare connections go together dry and clean. Hand tighten until seated, then a further 1\/4 to 1\/2 turn\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765066400046,"sku":"20-1000-1012","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1012_efa930d0-b57c-4bef-8626-41ef2bcb704a.jpg?v=1792384139"},{"product_id":"radium-20-1000-1006f-low-profile-swivel-banjo-fitting-10an-orb-to-6an-female","title":"Radium 20-1000-1006F Low Profile Swivel Banjo Fitting, 10AN ORB to 6AN Female","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 6AN Female\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1006F\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 6AN female, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eAN flare connections go together dry and clean. Hand tighten until seated, then a further 1\/4 to 1\/2 turn\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765066531118,"sku":"20-1000-1006F","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1006F.jpg?v=1792384140"},{"product_id":"radium-20-1000-1010-low-profile-swivel-banjo-fitting-10an-orb-to-10an-male","title":"Radium 20-1000-1010 Low Profile Swivel Banjo Fitting, 10AN ORB to 10AN Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 10AN Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1010\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 10AN male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eAN flare connections go together dry and clean. Hand tighten until seated, then a further 1\/4 to 1\/2 turn\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765066563886,"sku":"20-1000-1010","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1010.jpg?v=1792384140"},{"product_id":"radium-20-1000-1012s-low-profile-swivel-banjo-fitting-10an-orb-to-12mm-sae-quick-connect-male","title":"Radium 20-1000-1012S Low Profile Swivel Banjo Fitting, 10AN ORB to 12mm SAE Quick Connect Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 12mm SAE Quick Connect Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1012S\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 12mm SAE quick connect male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765066629422,"sku":"20-1000-1012S","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1012S_fc0299c2-82fc-4084-86f5-95e278f15fc3.webp?v=1792384140"},{"product_id":"radium-20-1000-1008-low-profile-swivel-banjo-fitting-10an-orb-to-8an-male","title":"Radium 20-1000-1008 Low Profile Swivel Banjo Fitting, 10AN ORB to 8AN Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 8AN Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1008\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to an 8AN male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eAN flare connections go together dry and clean. Hand tighten until seated, then a further 1\/4 to 1\/2 turn\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765066891566,"sku":"20-1000-1008","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1008.jpg?v=1792384141"},{"product_id":"radium-20-1000-10375-low-profile-swivel-banjo-fitting-10an-orb-to-3-8-sae-quick-connect-male","title":"Radium 20-1000-10375 Low Profile Swivel Banjo Fitting, 10AN ORB to 3\/8\" SAE Quick Connect Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 3\/8\" SAE Quick Connect Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-10375\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 3\/8\" SAE quick connect male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765073281326,"sku":"20-1000-10375","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-10375.jpg?v=1792384195"},{"product_id":"radium-20-1000-10313-low-profile-swivel-banjo-fitting-10an-orb-to-5-16-sae-quick-connect-male","title":"Radium 20-1000-10313 Low Profile Swivel Banjo Fitting, 10AN ORB to 5\/16\" SAE Quick Connect Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 5\/16\" SAE Quick Connect Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-10313\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 5\/16\" SAE quick connect male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765073346862,"sku":"20-1000-10313","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-10313.jpg?v=1792384195"},{"product_id":"radium-20-1000-1016s-low-profile-swivel-banjo-fitting-10an-orb-to-16mm-sae-quick-connect-male","title":"Radium 20-1000-1016S Low Profile Swivel Banjo Fitting, 10AN ORB to 16mm SAE Quick Connect Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 16mm SAE Quick Connect Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1016S\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 16mm SAE quick connect male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765073477934,"sku":"20-1000-1016S","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1016S.jpg?v=1792384195"},{"product_id":"radium-20-0530-pcv-valve-10an-orb-to-3-8-9-5mm-barb","title":"Radium 20-0530 PCV Valve, 10AN ORB to 3\/8\" (9.5mm) Barb","description":"\u003ch2\u003eRadium PCV Valve, 10AN ORB to 3\/8\" (9.5mm) Barb\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, any 10AN ORB female port incl. all Radium catch cans and PCV baffle plates\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0530\u003c\/p\u003e\u003cp\u003eA straight PCV valve with a 10AN ORB inlet and a 3\/8\" (9.5mm) barb outlet. Use it when the factory PCV valve has been removed, needs relocating to the catch can outlet, or the engine never had one. Like the OEM part, the internal plunger meters crankcase airflow to suit engine load. It closes on an intake backfire so vapours can't ignite in the crankcase, and closes under boost so intake pressure can't push into the crankcase. A simple check valve would cause a vacuum leak at low load.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-0561-pcv-valve-10an-orb-to-6an-male\"\u003eRadium PCV Valve, 10AN ORB to 6AN Male (20-0561)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-0683-pcv-valve-10an-orb-to-5-16-sae-quick-connect-male\"\u003eRadium PCV Valve, 10AN ORB to 5\/16\" SAE Quick Connect Male (20-0683)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-0688-pcv-valve-10an-orb-to-10mm-sae-quick-connect-male\"\u003eRadium PCV Valve, 10AN ORB to 10mm SAE Quick Connect Male (20-0688)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSupplied assembled with a 10AN ORB FKM O-ring fitted\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765073674542,"sku":"20-0530","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0530_c3fc259b-62d9-4436-9042-83d8eae70bf4.jpg?v=1792384195"},{"product_id":"radium-20-1000-1085-low-profile-swivel-banjo-fitting-10an-orb-to-8-5mm-barb","title":"Radium 20-1000-1085 Low Profile Swivel Banjo Fitting, 10AN ORB to 8.5mm Barb","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 8.5mm Barb\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1085\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to an 8.5mm barb, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765073707310,"sku":"20-1000-1085","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1085.jpg?v=1792384195"},{"product_id":"radium-20-1000-1010s-low-profile-swivel-banjo-fitting-10an-orb-to-10mm-sae-quick-connect-male","title":"Radium 20-1000-1010S Low Profile Swivel Banjo Fitting, 10AN ORB to 10mm SAE Quick Connect Male","description":"\u003ch2\u003eRadium Low Profile Swivel Banjo Fitting, 10AN ORB to 10mm SAE Quick Connect Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 10AN ORB (7\/8\"-14) ports in fuel, oil and coolant systems\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1010S\u003c\/p\u003e\u003cp\u003eScrews into a 10AN ORB port and turns the connection through 90° to a 10mm SAE quick connect male, in a much lower package than a standard elbow. It swivels a full 360° even after it's installed, so it's ideal where clearance and hose routing are tight, like on top of a fuel rail or surge tank. It's rated for high-pressure fuel and oil up to 400 psi and suits all fuels, oil and coolant.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-service-kit-low-profile-swivel-banjo-fittings\"\u003eRadium Service Kit, Low Profile Swivel Banjo Fittings (20-0723)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-18-0043-10-10an-orb-fkm-o-ring-5-pack\"\u003eRadium 10AN ORB FKM O-Rings, 5 Pack (18-0043-10)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDon't exceed 400 psi\u003c\/li\u003e\n\u003cli\u003eLubricate the ORB O-ring with engine oil, O-ring lube or petroleum jelly before fitting\u003c\/li\u003e\n\u003cli\u003eLightly oil the mating O-rings before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765073772846,"sku":"20-1000-1010S","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1010S.jpg?v=1792384196"},{"product_id":"radium-14-0215-pushlok-hose-end-10an-180","title":"Radium 14-0215 PushLok Hose End, 10AN 180°","description":"\u003ch2\u003eRadium PushLok Hose End, 10AN 180°\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 5\/8\" PushLok-compatible rubber hose, incl. Radium PCV\/fuel hose and Radium EFI hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0215\u003c\/p\u003e\u003cp\u003eA reusable 10AN 180° PushLok hose end for 5\/8\" hose. There are no clamps: just lubricate the barbs and push the hose on. Black anodised aluminium, it suits Radium PCV\/fuel hose, Radium EFI hose and other PushLok-compatible rubber hose, and the assembly holds more than 800 psi. It's the quick, tidy way to plumb catch cans, breathers and low-pressure fuel lines.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-e85-safe-reinforced-pcv-fuel-hose-sold-per-foot\"\u003eRadium E85-Safe Reinforced PCV\/Fuel Hose, 10AN, Sold per Foot (20-HOSE-10AN)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the barbs, then push into the hose. No clamps needed\u003c\/li\u003e\n\u003cli\u003eFor PushLok-compatible rubber hose only, not PTFE\u003c\/li\u003e\n\u003cli\u003eSizing: 6AN suits 3\/8\", 8AN suits 1\/2\", 10AN suits 5\/8\", 12AN suits 3\/4\" hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765074100526,"sku":"14-0215","price":52.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0215.jpg?v=1792384196"},{"product_id":"radium-20-1000-10313-pcv-swivel-banjo-pcv-valve-10an-orb-to-5-16-sae-quick-connect-male","title":"Radium 20-1000-10313-PCV Swivel Banjo PCV Valve, 10AN ORB to 5\/16\" SAE Quick Connect Male","description":"\u003ch2\u003eRadium Swivel Banjo PCV Valve, 10AN ORB to 5\/16\" SAE Quick Connect Male\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium Competition Catch Cans, Radium PCV baffle plates and 10AN ORB ports with extra clearance\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-10313-PCV\u003c\/p\u003e\u003cp\u003eA Radium PCV valve built into a low-profile 90° swivel banjo, from a 10AN ORB inlet to a 5\/16\" SAE quick connect male outlet. Use it when the factory PCV valve has been removed or relocated to the catch can, or the engine never had one. Like the OEM part, the plunger meters crankcase airflow to suit engine load. It closes on an intake backfire and under boost, which a simple check valve can't do without causing a vacuum leak at low load.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-1000-1006-pcv-swivel-banjo-pcv-valve-10an-orb-to-6an-male\"\u003eRadium Swivel Banjo PCV Valve, 10AN ORB to 6AN Male (20-1000-1006-PCV)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-0530-pcv-valve-10an-orb-to-3-8-9-5mm-barb\"\u003eRadium PCV Valve, 10AN ORB to 3\/8\" (9.5mm) Barb (20-0530)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds an extra 6.7mm of clearance past the threads for the O-ring to seat\u003c\/li\u003e\n\u003cli\u003eFits Radium Competition Catch Cans and PCV baffle plates. Doesn't fit Radium standard or Fluid Lock cans\u003c\/li\u003e\n\u003cli\u003eSupplied assembled with a 10AN ORB FKM O-ring fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765074133294,"sku":"20-1000-10313-PCV","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-10313-PCV_7b002c02-0237-48cd-8908-e8eee0e42143.jpg?v=1792384196"},{"product_id":"radium-14-0209-pushlok-hose-end-8an-120","title":"Radium 14-0209 PushLok Hose End, 8AN 120°","description":"\u003ch2\u003eRadium PushLok Hose End, 8AN 120°\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 1\/2\" PushLok-compatible rubber hose, incl. Radium PCV\/fuel hose and Radium EFI hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0209\u003c\/p\u003e\u003cp\u003eA reusable 8AN 120° PushLok hose end for 1\/2\" hose. There are no clamps: just lubricate the barbs and push the hose on. Black anodised aluminium, it suits Radium PCV\/fuel hose, Radium EFI hose and other PushLok-compatible rubber hose, and the assembly holds more than 800 psi. It's the quick, tidy way to plumb catch cans, breathers and low-pressure fuel lines.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-e85-safe-reinforced-pcv-fuel-hose-sold-per-foot\"\u003eRadium E85-Safe Reinforced PCV\/Fuel Hose, 8AN, Sold per Foot (20-HOSE-8AN)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the barbs, then push into the hose. No clamps needed\u003c\/li\u003e\n\u003cli\u003eFor PushLok-compatible rubber hose only, not PTFE\u003c\/li\u003e\n\u003cli\u003eSizing: 6AN suits 3\/8\", 8AN suits 1\/2\", 10AN suits 5\/8\", 12AN suits 3\/4\" hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765074166062,"sku":"14-0209","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0209.webp?v=1792384196"},{"product_id":"radium-14-0262-pushlok-hose-end-12an-45","title":"Radium 14-0262 PushLok Hose End, 12AN 45°","description":"\u003ch2\u003eRadium PushLok Hose End, 12AN 45°\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 3\/4\" PushLok-compatible rubber hose, incl. Radium PCV\/fuel hose and Radium EFI hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0262\u003c\/p\u003e\u003cp\u003eA reusable 12AN 45° PushLok hose end for 3\/4\" hose. There are no clamps: just lubricate the barbs and push the hose on. Black anodised aluminium, it suits Radium PCV\/fuel hose, Radium EFI hose and other PushLok-compatible rubber hose, and the assembly holds more than 800 psi. It's the quick, tidy way to plumb catch cans, breathers and low-pressure fuel lines.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-e85-safe-reinforced-pcv-fuel-hose-sold-per-foot\"\u003eRadium E85-Safe Reinforced PCV\/Fuel Hose, 12AN, Sold per Foot (20-HOSE-12AN)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLubricate the barbs, then push into the hose. No clamps needed\u003c\/li\u003e\n\u003cli\u003eFor PushLok-compatible rubber hose only, not PTFE\u003c\/li\u003e\n\u003cli\u003eSizing: 6AN suits 3\/8\", 8AN suits 1\/2\", 10AN suits 5\/8\", 12AN suits 3\/4\" hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765074198830,"sku":"14-0262","price":26.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0262.jpg?v=1792384198"},{"product_id":"radium-20-1000-1065-pcv-swivel-banjo-pcv-valve-10an-orb-to-6-5mm-barb","title":"Radium 20-1000-1065-PCV Swivel Banjo PCV Valve, 10AN ORB to 6.5mm Barb","description":"\u003ch2\u003eRadium Swivel Banjo PCV Valve, 10AN ORB to 6.5mm Barb\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium Competition Catch Cans, Radium PCV baffle plates and 10AN ORB ports with extra clearance\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1000-1065-PCV\u003c\/p\u003e\u003cp\u003eA Radium PCV valve built into a low-profile 90° swivel banjo, from a 10AN ORB inlet to a 6.5mm barb outlet. Use it when the factory PCV valve has been removed or relocated to the catch can, or the engine never had one. Like the OEM part, the plunger meters crankcase airflow to suit engine load. It closes on an intake backfire and under boost, which a simple check valve can't do without causing a vacuum leak at low load.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-1000-1006-pcv-swivel-banjo-pcv-valve-10an-orb-to-6an-male\"\u003eRadium Swivel Banjo PCV Valve, 10AN ORB to 6AN Male (20-1000-1006-PCV)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-0530-pcv-valve-10an-orb-to-3-8-9-5mm-barb\"\u003eRadium PCV Valve, 10AN ORB to 3\/8\" (9.5mm) Barb (20-0530)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds an extra 6.7mm of clearance past the threads for the O-ring to seat\u003c\/li\u003e\n\u003cli\u003eFits Radium Competition Catch Cans and PCV baffle plates. Doesn't fit Radium standard or Fluid Lock cans\u003c\/li\u003e\n\u003cli\u003eSupplied assembled with a 10AN ORB FKM O-ring fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765074231598,"sku":"20-1000-1065-PCV","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1000-1065-PCV_b85d39d7-51cf-4534-bfda-1b6a6407b538.jpg?v=1792384198"}],"url":"https:\/\/radiumengineering.com.au\/collections\/universal-catch-cans-aos.oembed?page=5","provider":"Radium Engineering Australia","version":"1.0","type":"link"}