{"title":"Nissan","description":"\u003cp\u003eBrowse our selection of performance parts and accessories for Nissan vehicles.\u003c\/p\u003e","products":[{"product_id":"radium-fuel-rail-nissan-skyline-gtr-r32-r33-r34-rb26dett","title":"Radium Fuel Rail - Nissan Skyline GTR R32, R33, R34 (RB26DETT)","description":"\u003ch2\u003eRadium Fuel Rail – Nissan Skyline GT-R R32\/R33\/R34 (RB26DETT)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan RB26DETT on the factory intake manifold\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0217\u003c\/p\u003e\n\u003cp\u003eThe factory RB26 rail feeds from one end and starves the rear cylinders once you're running big injectors and big boost. This Radium rail has a 17.5mm bore and three 8AN ORB ports (front, rear and centre), so you can feed it evenly and keep all six cylinders at the same pressure.\u003c\/p\u003e\n\u003cp\u003ePress-fit spacers and washers keep manifold heat out of the fuel. It suits OEM-style injectors and is a common choice on Australian GT-Rs, from street E85 cars to time attack.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-skyline-gts-t-gt-r-r32-gt-r-r33-r34-rb20-rb26\"\u003eFuel Rail Plumbing Kit – RB20\/RB26 (20-0217-PK)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fpr-adaptor-8an-orb-11mm-bore-32mm-spacing-m5-subaru-nissan-mazda-rx-7\"\u003eFPR Adaptor 8AN ORB, 32mm spacing (20-0303)\u003c\/a\u003e – to reuse the factory regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is an upgrade rail, not a top feed conversion. Use OEM or dimensionally equivalent injectors (same height and O-ring sizes). Your tuner can advise on flow rate.\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT gauge port can be plugged if not used.\u003c\/li\u003e\n\u003cli\u003eFittings, regulators, gauges and pulse dampers are sold separately. Leave room around the ports for them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline GT-R R32 (RB26DETT)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GT-R R33 (RB26DETT)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GT-R R34 (RB26DETT)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764921958702,"sku":"20-0217","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0217.jpg?v=1792383216"},{"product_id":"radium-top-feed-conversion-fuel-rail-nissan-skyline-r33-rb25det","title":"Radium Top Feed Conversion Fuel Rail - Nissan Skyline R33 (RB25DET)","description":"\u003ch2\u003eRadium Top Feed Conversion Fuel Rail – Nissan RB25DET (R33)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan RB25DET non-NEO (Skyline R33 GTS-T, Stagea S1)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0277\u003c\/p\u003e\n\u003cp\u003eThe R33's side-feed injectors limit your options once you want serious power or E85. This Radium rail converts the RB25DET to top-feed injectors, so you can run modern high-flow injectors like Injector Dynamics XDS on the factory manifold.\u003c\/p\u003e\n\u003cp\u003eIt has a 17.5mm bore, four 8AN ORB ports, and two sets of insulating spacers to suit 48mm or 34mm injectors. It's popular on R33 drift cars and street builds across Australia.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuits non-NEO RB25DET only. The NEO uses a different rail (20-0537).\u003c\/li\u003e\n\u003cli\u003eInjectors and fittings are not included. Use 48mm or 34mm top-feed injectors with 14mm O-rings.\u003c\/li\u003e\n\u003cli\u003ePlug any unused ports.\u003c\/li\u003e\n\u003cli\u003eFittings, regulators, gauges and pulse dampers are sold separately. Leave room around the ports for them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline R33 GTS-T (RB25DET)\u003c\/li\u003e\n\u003cli\u003eNissan Stagea WC34 Series 1 (RB25DET)\u003c\/li\u003e\n\u003cli\u003eOther non-NEO RB25DET swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764922712366,"sku":"20-0277","price":471.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0277_23be2e9c-13ee-45dc-8bf4-84c8f15acf83.jpg?v=1792383220"},{"product_id":"radium-iacv-spacer-kit-nissan-s14-15-sr20det","title":"Radium IACV Spacer Kit - Nissan S14\/15 (SR20DET)","description":"\u003ch2\u003eRadium IACV Spacer Kit – Nissan SR20DET (S14\/S15)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan SR20DET (Silvia S14, S15, 200SX)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0162\u003c\/p\u003e\n\u003cp\u003eFitting a top-feed rail to an S14 or S15 SR20DET hits the factory IACV bypass hard line. This kit replaces that two-bolt hard line with a billet spacer, and reroutes the charge pipe hose around the outside of the manifold with a barb adapter and hose.\u003c\/p\u003e\n\u003cp\u003eIt's the clean way to clear a top-feed conversion on the drift and street SR20s that are everywhere in Australia.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-iacv-gasket-nissan-s14-15-sr20det\"\u003eIACV Gasket – SR20DET (18-0014)\u003c\/a\u003e – spare gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to clear top feed fuel rails such as Radium 20-0359.\u003c\/li\u003e\n\u003cli\u003eIncludes everything needed to reroute the bypass hose.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan 200SX S14 \/ Silvia S14 (SR20DET)\u003c\/li\u003e\n\u003cli\u003eNissan 200SX S15 \/ Silvia S15 (SR20DET)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764923040046,"sku":"20-0162","price":122.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0162.jpg?v=1792383227"},{"product_id":"radium-fuel-rail-kit-nissan-350z-370z-skyline-v35-v36-infiniti-g35-g37-vq35-37","title":"Radium Fuel Rail Kit - Nissan 350Z\/370Z\/Skyline V35\/V36\/Infiniti G35\/G37 (VQ35\/37)","description":"\u003ch2\u003eRadium Fuel Rail Kit – Nissan VQ35DE\/VQ35HR\/VQ37VHR\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan 350Z, 370Z, Skyline V35\/V36 and Infiniti G35\/G37 (VQ35DE, VQ35HR, VQ37VHR)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0458\u003c\/p\u003e\n\u003cp\u003eSupercharged and turbo VQs quickly outgrow the factory rails. These Radium billet rails give each bank four 8AN ORB ports (two ends, two underneath) and 14mm injector bores, so you can keep OEM-style injectors and plumb in parallel, in series or as a full return system.\u003c\/p\u003e\n\u003cp\u003eThe spare ports take a pressure sensor or pulse dampers, and the OEM injector clips can be reused on the VQ35. A good fit for boosted Zs and V35\/V36 Skylines used for drift and track days.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-350z-03-07-skyline-v35-vq35de\"\u003eFuel Rail Plumbing Kit – VQ35DE (20-0468)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-350z-07-09-370z-skyline-v36-infiniti-g35-g36-v36-vq35hr-vq37vhr\"\u003eFuel Rail Plumbing Kit – VQ35HR\/VQ37VHR (20-0469)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-14-0150-8an-orb-plug-round-internal-hex\"\u003e8AN ORB Plug (14-0150)\u003c\/a\u003e – two needed on VQ35DE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRails only. Plumbing kits, fittings, regulators and dampers are sold separately.\u003c\/li\u003e\n\u003cli\u003eThis is an upgrade rail, not a top feed conversion. Use OEM or dimensionally equivalent injectors.\u003c\/li\u003e\n\u003cli\u003eVQ35DE: fit two 14-0150 plugs to the centre ports of one rail to clear the manifold bosses.\u003c\/li\u003e\n\u003cli\u003eVQ37VHR only works with the OEM pulse dampers, not Radium dampers.\u003c\/li\u003e\n\u003cli\u003eClearances are tight, so dampers only fit in certain positions. Check Radium's fitment chart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan 350Z Z33 (VQ35DE \/ VQ35HR)\u003c\/li\u003e\n\u003cli\u003eNissan 370Z Z34 (VQ37VHR)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline V35 (VQ35DE) and V36 (VQ35HR \/ VQ37VHR)\u003c\/li\u003e\n\u003cli\u003eInfiniti G35 \/ G37\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764928741678,"sku":"20-0458","price":524.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0458.jpg?v=1792383273"},{"product_id":"radium-triple-catch-can-kit-nissan-r35-gt-r-fluid-lock","title":"Radium Triple Catch Can Kit, Nissan R35 GT-R, Fluid Lock","description":"\u003ch2\u003eRadium Triple Fluid Lock Catch Can Kit, Nissan R35 GT-R\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan R35 GT-R, VR38DETT\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0566-FL\u003c\/p\u003e\u003cp\u003eThis is the complete setup for the R35: the dual CCV kit (20-0555-FL), with one can per head breather at the front of the engine, plus the PCV kit (20-0565-FL) on the left side near the brake master cylinder. Between the three cans, oil stays out of the intake, intercoolers, throttle bodies and plenum at every load, from cruising to full boost.\u003c\/p\u003e\u003cp\u003eEvery can uses the patented Fluid Lock design, so none of them can overfill into the intake. They're pressure sealed, so the PCV can connects straight to the manifold with no check valve. Vehicle-specific brackets mean no drilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-gt-r-r35\"\u003eRadium Fuel Rail Kit, R35 GT-R (20-0556-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-feed-kit-w-microglass-filter-nissan-gt-r-r35\"\u003eRadium Fuel Hanger Feed Kit, R35 GT-R (20-0851)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe PCV can isn't a direct fit on 2008–2011 GT-Rs without the OEM strut bar\u003c\/li\u003e\n\u003cli\u003eRHD cars may need some modification to mount the PCV can. Email us before ordering\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks from 3–4 weeks, then as needed\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to engine wear, overfilled oil, poor breather baffling or a PCV valve leaking under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan R35 GT-R, VR38DETT (2008–2011 cars need the OEM strut bar)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764929036590,"sku":"20-0566-FL","price":1065.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0566-FL.jpg?v=1792383274"},{"product_id":"radium-10an-male-press-fit-fitting-nissan-s13-sr20det-exhaust","title":"Radium 10AN Male Press-Fit Fitting - Nissan S13 SR20DET Exhaust","description":"\u003ch2\u003eRadium 10AN Press-In Valve Cover Fitting, Nissan S13 SR20DET (Exhaust Side, Double Banjo)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia \/ 180SX S13 SR20DET, exhaust-side valve cover\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0811\u003c\/p\u003e\u003cp\u003eA low-profile, double-ended 10AN banjo that replaces both exhaust-side breather barbs on the S13 SR20DET valve cover with one fitting. That makes it easy to run big breather lines to a catch can on an S13 drift or street build. It presses straight into the OEM cover.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-10an-male-press-in-valve-cover-fitting-nissan-sr20det-s14-s15-exhaust-side\"\u003eRadium 10AN Press-In Valve Cover Fitting, Nissan SR20DET S14 \/ S15 (Exhaust Side) (20-0812)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-10an-male-press-in-pcv-valve-fitting-nissan-engines-multi-fit\"\u003eRadium 10AN Press-In PCV Valve Fitting, Nissan Engines (Multi-Fit) (20-0808)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eS13 SR20DET exhaust-side cover only. S14 \/ S15 need the 20-0812\u003c\/li\u003e\n\u003cli\u003eHose ends sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan Silvia \/ 180SX S13 SR20DET (exhaust-side valve cover)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764930642222,"sku":"20-0811","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0811_af4e6984-204b-4441-83be-0a34c115f4f7.jpg?v=1792383277"},{"product_id":"radium-12an-male-press-in-valve-cover-fittings-nissan-rb26dett","title":"Radium 12AN Male Press-In Valve Cover Fittings - Nissan RB26DETT","description":"\u003ch2\u003eRadium 12AN Press-In Valve Cover Fitting, Nissan RB26DETT\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan RB26DETT (Skyline GT-R R32 \/ R33 \/ R34), intake or exhaust valve cover\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0809\u003c\/p\u003e\u003cp\u003eA low-profile 12AN male fitting that replaces either RB26DETT valve cover breather fitting, so you can run large breather lines to a catch can on a GT-R. It presses into the OEM cover.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-sae-double-banjo-press-in-valve-cover-fitting-nissan-skyline-gt-r-r32-r33-r34-rb26dett\"\u003eRadium Double SAE Press-In Valve Cover Fitting, Nissan RB26DETT (20-0739)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne fitting per cover. Order 2 to replace both\u003c\/li\u003e\n\u003cli\u003eFor 16mm SAE quick-connect hose ends, use the 20-0739 double SAE fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan Skyline GT-R R32 \/ R33 \/ R34 RB26DETT (intake or exhaust cover)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764930707758,"sku":"20-0809","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0809.jpg?v=1792383279"},{"product_id":"radium-fuel-rail-top-feed-conversion-nissan-sr20det-s14-s15","title":"Radium Fuel Rail, Top Feed Conversion, Nissan SR20DET (S14\/S15)","description":"\u003ch2\u003eRadium Top Feed Conversion Fuel Rail Kit – Nissan SR20DET (S14\/S15)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan SR20DET (200SX\/Silvia S14 and S15)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0359\u003c\/p\u003e\n\u003cp\u003eThe S14 and S15 side-feed injectors are a dead end once you want E85 or a bigger turbo. This Radium kit converts the SR20DET to top-feed injectors, with a 17.5mm bore billet rail and three 8AN ORB ports.\u003c\/p\u003e\n\u003cp\u003eIt's a complete kit: billet injector seats, insulating spacers, and an IACV spacer with barb adapter to replace the factory bypass hard line that would otherwise foul the rail. One of the most popular upgrades for Australian S-chassis drift and street cars.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-iacv-gasket-nissan-s14-15-sr20det\"\u003eIACV Gasket – SR20DET (18-0014)\u003c\/a\u003e – spare gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds 34mm top-feed injectors with 14mm O-rings. The short height avoids bonnet clearance issues.\u003c\/li\u003e\n\u003cli\u003eInjectors and fittings are not included.\u003c\/li\u003e\n\u003cli\u003eThe S13 SR20DET uses a different kit (20-0558).\u003c\/li\u003e\n\u003cli\u003eLeave room around the ports for regulators, gauges and dampers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan 200SX \/ Silvia S14 (SR20DET)\u003c\/li\u003e\n\u003cli\u003eNissan 200SX \/ Silvia S15 (SR20DET)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764932280622,"sku":"20-0359","price":506.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0359.jpg?v=1792383287"},{"product_id":"radium-iacv-gasket-nissan-s14-15-sr20det","title":"Radium IACV Gasket - Nissan S14\/15 (SR20DET)","description":"\u003ch2\u003eRadium IACV Gasket, Nissan S14 \/ S15 (SR20DET)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S14 \/ S15 Silvia and 200SX, SR20DET and SR20VE\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 18-0014\u003c\/p\u003e\u003cp\u003eA replacement idle air control valve gasket for SR20DET and SR20VE engines in the S14 and S15. The factory Nissan gasket (23785-2J200) is discontinued, so this is a handy one to have on the shelf for 200SX owners. It's CNC knife-cut from Kevlar bonded with nitrile rubber, which resists fuel and oil.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eReplaces the discontinued Nissan 23785-2J200\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan S14 Silvia \/ 200SX, SR20DET\u003c\/li\u003e\n\u003cli\u003eNissan S15 Silvia \/ 200SX, SR20DET\u003c\/li\u003e\n\u003cli\u003eNissan S14 \/ S15, SR20VE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764939882798,"sku":"18-0014","price":10.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/18-0014.jpg?v=1792383341"},{"product_id":"radium-transmission-filter-stainless-nissan-gt-r-r35","title":"Radium Transmission Filter Stainless - Nissan GT-R R35","description":"\u003ch2\u003eRadium Stainless Transmission Filter, Nissan GT-R R35\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan GT-R R35 2007+, GR6 dual-clutch transmission\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 18-0028\u003c\/p\u003e\u003cp\u003eA replacement filter for the R35's GR6 transmission, with a stainless mesh element instead of a disposable one. The internal bypass valve uses a progressive disc design, so it suits stock and heavily modified GR6 builds alike. Like the factory filter, it has an integrated diffuser that spreads oil flow across the whole element.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMade specifically for the GR6 transmission\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan GT-R R35 2007+ (GR6 transmission)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764940243246,"sku":"18-0028","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/18-0028.jpg?v=1792383343"},{"product_id":"radium-fuel-rail-plumbing-kit-nissan-skyline-gts-t-gt-r-r32-gt-r-r33-r34-rb20-rb26","title":"Radium Fuel Rail Plumbing Kit - Nissan Skyline GTS-T \u0026 GT-R R32\/GT-R R33, R34 (RB20\/RB26)","description":"\u003ch2\u003eRadium Fuel Rail Plumbing Kit, Nissan Skyline RB26DETT \/ RB20DET\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Skyline GT-R R32 \/ R33 \/ R34 (RB26DETT) and RB20DET (R32 GTS-T) with a Radium RB fuel rail\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0217-PK\u003c\/p\u003e\u003cp\u003eMakes fitting a Radium RB26 or RB20 rail a complete bolt-on. A 6AN PushLok feed runs from the factory filter to the rear of the rail. An FPR adapter mounts the OEM regulator on the front port, with hose back to the factory hard line on the frame rail. Stainless EFI clamps secure every barb, and plugs seal the centre and gauge ports.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-nissan-skyline-gtr-r32-r33-r34-rb26dett\"\u003eRadium Fuel Rail, Skyline GT-R RB26DETT (20-0217)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-skyline-r32-rb20det\"\u003eRadium Fuel Rail Kit, Skyline R32 RB20DET (20-0757)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium fuel rail required (sold separately)\u003c\/li\u003e\n\u003cli\u003eRadium rails are upgrade rails. Use OEM or OEM-equivalent injectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan Skyline GT-R R32 1989–1993 (RB26DETT)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GT-R R33 1993–1998 (RB26DETT)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GT-R R34 1998–2002 (RB26DETT)\u003c\/li\u003e\n\u003cli\u003eNissan RB20DET (silver top) 1989–1993\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764950466862,"sku":"20-0217-PK","price":157.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0217-PK.jpg?v=1792383395"},{"product_id":"radium-fpr-adaptor-8an-orb-11mm-bore-32mm-spacing-m5-subaru-nissan-mazda-rx-7","title":"Radium FPR Adaptor 8AN ORB, 11mm Bore, 32mm Spacing, M5 - Subaru\/Nissan\/Mazda RX-7","description":"\u003ch2\u003eRadium OEM FPR Adapter, 8AN ORB, 11mm Bore, 32mm Spacing, M5\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e OEM regulators \/ dampers with 11mm bore and 32mm hole spacing: Nissan RB \/ SR \/ KA \/ CA, Subaru GC8, RX-7 FD and more\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0303\u003c\/p\u003e\u003cp\u003eKeep the factory Nissan, Subaru or RX-7 regulator on an aftermarket rail. This billet adapter threads into any 8AN ORB rail port, accepts the OEM regulator or damper, and clocks to the right angle. It's a common fit on RB and SR builds going to a top-feed rail.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-fpr-adaptor-8an-orb-11mm-bore-39mm-spacing-m6-subaru-wrx-sti-01-07-mitsubishi-evo-x-mazda-mx-5-toyota-2jz\"\u003eRadium FPR Adapter, 11mm \/ 39mm \/ M6 (20-0301)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour OEM regulator must match both the 11mm bore and the 32mm hole spacing\u003c\/li\u003e\n\u003cli\u003eThe rail needs an 8AN ORB port with room around it for the regulator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan RB26DETT, RB25DET, RB20DET (FPR); RB25DET NEO, RB25DE NEO, RB20DE NEO (FPR and FPD)\u003c\/li\u003e\n\u003cli\u003eNissan SR20DET, KA24E, KA24DE, CA18DET (FPR)\u003c\/li\u003e\n\u003cli\u003eSubaru EJ20 GC8 WRX, EJ22E, EJ22T, EJ251, EJ255 (FPR)\u003c\/li\u003e\n\u003cli\u003eMazda RX-7 13B-REW (FPR)\u003c\/li\u003e\n\u003cli\u003eSaab 9-2X Aero 2.5L, Polaris RZR 2011–2020 (FPR)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764953776430,"sku":"20-0303","price":61.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0303.jpg?v=1792383402"},{"product_id":"radium-injector-seats-for-top-feed-conversion-fuel-rails-nissan-sr20det-rb25det","title":"Radium Injector Seats for Top Feed Conversion Fuel Rails - Nissan SR20DET\/RB25DET","description":"\u003ch2\u003eRadium Nissan 30mm Injector Seats, Set of 4\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan KA24DE (S13\/S14), SR20DET (S13)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0160-04\u003c\/p\u003e\u003cp\u003eConverting a Silvia or 180SX from side-feed to modern top-feed injectors needs a proper seat in the manifold. These are the same 30mm seats Radium supplies in its Nissan fuel rail kits, in a set of four for one engine.\u003c\/p\u003e\u003cp\u003eEach seat presses into the injector port and seals with an FKM O-ring. The bore suits the common 14mm lower injector O-ring. CNC-machined 6061 aluminium, bright-dip black anodised.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-injector-seats-nissan-25mm-30mm\"\u003eRadium Nissan Injector Seats, 25mm \/ 30mm Singles (20-0161 \/ 20-0160)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis is the 30mm seat. RB25DET (non-NEO), S14\/S15 SR20DET and SR20VE use the 25mm seat (20-0161)\u003c\/li\u003e\n\u003cli\u003eClean the bores and lube the O-rings before pressing the seats in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan KA24DE, S13 and S14\u003c\/li\u003e\n\u003cli\u003eNissan SR20DET, S13\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764955021614,"sku":"20-0160-04","price":86.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0160_f9e469ee-c8f6-45c1-823b-d24589f05227.jpg?v=1792383406"},{"product_id":"radium-fuel-rail-nissan-sr20ve","title":"Radium Fuel Rail - Nissan SR20VE","description":"\u003ch2\u003eRadium Top Feed Conversion Fuel Rail – Nissan SR20VE\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan SR20VE (Primera P11\/P12, Bluebird U14) and SR20VE swaps into Silvia S13\/S14\/S15 and 180SX\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0331\u003c\/p\u003e\u003cp\u003eThe SR20VE's factory side-feed injectors leave very few upgrade options once you add boost or move to E85. This kit converts the engine to top feed so you can run modern high-flow 14mm O-ring injectors, opening up the full range of injector sizes for turbo VE builds in drift, circuit and hillclimb cars.\u003c\/p\u003e\u003cp\u003eAnodised billet injector seats press into the intake manifold, and the rail itself is extruded and CNC-machined from solid 6063 aluminium with a 17.5mm internal bore. It's designed around short 34mm injectors to keep bonnet clearance, and the factory insulating spacers combined with Radium's thermal washers keep intake manifold heat out of the fuel.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dmr-ra-direct-mount-fuel-pressure-regulator\"\u003eRadium DMR-RA Direct Mount Fuel Pressure Regulator\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-v2-fpd-r-fuel-pulse-damper-8an-orb\"\u003eRadium V2 FPD-R Fuel Pulse Damper, 8AN ORB\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for short 34mm top-feed injectors with 14mm O-rings – taller injectors can foul the bonnet.\u003c\/li\u003e\n\u003cli\u003eReuses the factory insulating spacers.\u003c\/li\u003e\n\u003cli\u003eInjectors, fittings and fuel pressure regulator are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan SR20VE engine swaps (Silvia S13\/S14\/S15, 180SX and others using the factory VE intake manifold)\u003c\/li\u003e\n\u003cli\u003eNissan Primera P11\/P12 (SR20VE)\u003c\/li\u003e\n\u003cli\u003eNissan Bluebird U14 (SR20VE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963017006,"sku":"20-0331","price":384.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0331_0e097a35-9bce-4d56-bc97-b109ec107c21.jpg?v=1792383459"},{"product_id":"radium-fuel-rail-plumbing-kit-nissan-350z-07-09-370z-skyline-v36-infiniti-g35-g36-v36-vq35hr-vq37vhr","title":"Radium Fuel Rail Plumbing Kit - Nissan 350Z 07-09\/370Z\/Skyline V36\/Infiniti G35\/G36 V36 (VQ35HR\/VQ37VHR)","description":"\u003ch2\u003eRadium Fuel Rail Plumbing Kit, Nissan 370Z \/ 350Z HR \/ Skyline V36 (VQ35HR \/ VQ37VHR)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan \/ Infiniti VQ35HR and VQ37VHR (350Z 2007–2009, 370Z, Skyline V36, G35 \/ G37) with Radium 20-0458 fuel rails\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0469\u003c\/p\u003e\u003cp\u003eMakes Radium's VQ rail upgrade a bolt-on job on the HR and VHR engines, with fuel routed to the front rail ports. Two 20-0459 adapters are included, so both factory pulse dampers can be reused. You get three PTFE hoses, a Y-adapter, a 5\/16\" SAE adapter for the factory feed, and all the plugs and fittings.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-350z-370z-skyline-v35-v36-infiniti-g35-g37-vq35-37\"\u003eRadium Fuel Rail Kit, Nissan VQ35 \/ VQ37 (20-0458)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires Radium 20-0458 rails (sold separately)\u003c\/li\u003e\n\u003cli\u003eTwo 20-0459 damper adapters are included, so there's no need to order them separately\u003c\/li\u003e\n\u003cli\u003eThe VQ37VHR isn't compatible with any Radium aftermarket damper. Only the OEM dampers can be used\u003c\/li\u003e\n\u003cli\u003eVQ35DE engines need the 20-0468 kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 370Z (VQ37VHR)\u003c\/li\u003e\n\u003cli\u003eNissan 350Z 2007–2009 (VQ35HR)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline V36 \/ Infiniti G35 \/ G37 (VQ35HR \/ VQ37VHR)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963311918,"sku":"20-0469","price":384.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0469.jpg?v=1792383459"},{"product_id":"radium-fuel-rail-plumbing-kit-nissan-350z-03-07-skyline-v35-vq35de","title":"Radium Fuel Rail Plumbing Kit - Nissan 350Z 03-07\/Skyline V35 (VQ35DE)","description":"\u003ch2\u003eRadium Fuel Rail Plumbing Kit, Nissan 350Z \/ Skyline V35 (VQ35DE)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan \/ Infiniti VQ35DE (350Z 2003–2007, Skyline V35) with Radium 20-0458 fuel rails\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0468\u003c\/p\u003e\u003cp\u003eMakes Radium's VQ rail upgrade a bolt-on, plug-and-play job on the VQ35DE. It's a common step on supercharged or turbo 350Zs. The kit includes three PTFE hoses, a Y-adapter, an FPR adapter, a 5\/16\" SAE adapter for the factory feed and all the plugs and fittings for the rail ports.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-350z-370z-skyline-v35-v36-infiniti-g35-g37-vq35-37\"\u003eRadium Fuel Rail Kit, Nissan VQ35 \/ VQ37 (20-0458)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fpd-adapter-8an-orb-11mm-bore-42mm-spacing-m6-nissan-350z-03-07-skyline-v35-vq35de\"\u003eRadium FPD Adapter, VQ35DE OEM Damper (20-0460)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires Radium 20-0458 rails (sold separately)\u003c\/li\u003e\n\u003cli\u003eOn the VQ35DE, one of each centre rail port must be plugged because of the OEM manifold bosses\u003c\/li\u003e\n\u003cli\u003eRadium's description mentions the 20-0460 OEM damper adapter, but it isn't in the contents list. Email us to confirm\u003c\/li\u003e\n\u003cli\u003eVQ35HR and VQ37VHR engines need the 20-0469 kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 350Z 2003–2007 (VQ35DE)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline V35 \/ Infiniti G35 (VQ35DE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963639598,"sku":"20-0468","price":384.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0468.jpg?v=1792383460"},{"product_id":"radium-fpd-adapter-8an-orb-27mm-bore-nissan-350z-07-09-370z-skyline-v36-infiniti-g35-g36-v36-vq35hr-vq37vhr","title":"Radium FPD Adapter 8AN ORB \/ 27mm Bore - Nissan 350Z 07-09\/370Z\/Skyline V36\/Infiniti G35\/G36 V36 (VQ35HR\/VQ37VHR)","description":"\u003ch2\u003eRadium FPD Adapter, 8AN ORB \/ 27mm Bore, Nissan VQ35HR \/ VQ37VHR (Pair)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan \/ Infiniti VQ35HR and VQ37VHR with Radium 20-0458 fuel rails\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0459\u003c\/p\u003e\u003cp\u003eLets you reuse the factory VQ35HR \/ VQ37VHR pulse dampers on Radium's VQ rails. Each adapter screws into an 8AN ORB rail port and takes one OEM damper. They only fit rail positions with enough clearance, so check Radium's chart in the instructions.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-350z-370z-skyline-v35-v36-infiniti-g35-g37-vq35-37\"\u003eRadium Fuel Rail Kit, Nissan VQ35 \/ VQ37 (20-0458)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-350z-07-09-370z-skyline-v36-infiniti-g35-g36-v36-vq35hr-vq37vhr\"\u003eRadium Fuel Rail Plumbing Kit, Nissan VQ35HR \/ VQ37VHR (20-0469)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo are already included in the 20-0469 plumbing kit\u003c\/li\u003e\n\u003cli\u003eVQ35DE engines need the 20-0460\u003c\/li\u003e\n\u003cli\u003eThe VQ37VHR can only use the OEM dampers, not Radium aftermarket ones\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan 370Z, 350Z 2007–2009, Skyline V36 \/ Infiniti G35 \/ G37 (VQ35HR \/ VQ37VHR) with Radium 20-0458 rails\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963967278,"sku":"20-0459","price":52.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0459.jpg?v=1792383464"},{"product_id":"radium-fpd-adapter-8an-orb-11mm-bore-42mm-spacing-m6-nissan-350z-03-07-skyline-v35-vq35de","title":"Radium FPD Adapter 8AN ORB\/11mm Bore\/42mm Spacing\/M6 - Nissan 350Z 03-07\/Skyline V35 (VQ35DE)","description":"\u003ch2\u003eRadium FPD Adapter, 8AN ORB \/ 11mm Bore \/ M6, Nissan VQ35DE\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan \/ Infiniti VQ35DE with Radium 20-0458 fuel rails\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0460\u003c\/p\u003e\u003cp\u003eLets you reuse the factory VQ35DE pulse damper on Radium's VQ rails. It screws into an 8AN ORB rail port and matches the OEM damper's flange. It only fits rail positions with enough clearance, so check Radium's chart in the instructions.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-350z-370z-skyline-v35-v36-infiniti-g35-g37-vq35-37\"\u003eRadium Fuel Rail Kit, Nissan VQ35 \/ VQ37 (20-0458)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-350z-03-07-skyline-v35-vq35de\"\u003eRadium Fuel Rail Plumbing Kit, Nissan VQ35DE (20-0468)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVQ35HR \/ VQ37VHR engines need the 20-0459\u003c\/li\u003e\n\u003cli\u003eRadium says it's included with the 20-0468 kit, but it isn't in that kit's contents list. Email us before ordering both\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan 350Z 2003–2007, Skyline V35 \/ Infiniti G35 (VQ35DE) with Radium 20-0458 rails\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764969242926,"sku":"20-0460","price":61.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0460.jpg?v=1792383489"},{"product_id":"radium-dual-fluid-lock-catch-can-kit-nissan-370z-z34-09-21","title":"Radium Dual Fluid Lock Catch Can Kit - Nissan 370Z Z34 09-21","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Nissan 370Z Z34 (VQ37VHR)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan 370Z (Z34), Infiniti G37, VQ37VHR\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0525-FL\u003c\/p\u003e\u003cp\u003eThe VQ37VHR has a PCV valve in each valve cover, and both feed oil vapour into the intake. This kit gives each bank its own Fluid Lock can, one on each strut tower, running inline with the twin PCV valves. That keeps oil out of the intake, throttle body and manifold while the factory PCV system keeps working as designed.\u003c\/p\u003e\u003cp\u003eThe cans are pressure sealed, so no check valve is needed and they can connect straight to the manifold. It's a direct fit with no drilling. Stainless relocation brackets for the power steering reservoir and relay box are included to make room.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-surge-tank-nissan-370z-z-400z-walbro-aem-no-pumps\"\u003eRadium Fuel Hanger Surge Tank, 370Z (20-1820)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo extra inline check valve needed. The cans are pressure sealed\u003c\/li\u003e\n\u003cli\u003eEmptying frequency varies. Start checking the dipsticks 3–4 weeks after fitting\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, overfilled oil, poor breather baffling or a PCV valve leaking under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 370Z (Z34), VQ37VHR\u003c\/li\u003e\n\u003cli\u003eInfiniti G37, VQ37VHR\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764974485806,"sku":"20-0525-FL","price":821.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0525-FL_8c8a9fef-d5f4-4511-ae98-113d2c68caa8.jpg?v=1792383517"},{"product_id":"radium-dual-catch-can-kit-ccv-nissan-r35-gt-r-fluid-lock","title":"Radium Dual Catch Can Kit, CCV, Nissan R35 GT-R, Fluid Lock","description":"\u003ch2\u003eRadium Dual Fluid Lock CCV Catch Can Kit, Nissan R35 GT-R\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan R35 GT-R\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0555-FL\u003c\/p\u003e\u003cp\u003eEach of the R35's cylinder heads has a breather running to its own turbo inlet. Under full boost those breathers carry oil and sludge into the intake piping and intercoolers, which cuts intercooler efficiency. This kit puts a Fluid Lock can inline on each breather, one per head, mounted at the front of the engine, with the factory system otherwise unchanged.\u003c\/p\u003e\u003cp\u003eBoth cans bolt in with no drilling, and the patented Fluid Lock design stops them overfilling into the intake if a service gets missed. Radium recommends running this kit with the PCV kit (20-0565-FL), or the triple kit that combines both.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-kit-pcv-nissan-r35-gt-r-fluid-lock\"\u003eRadium PCV Catch Can Kit, R35 GT-R (20-0565-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-triple-catch-can-kit-nissan-r35-gt-r-fluid-lock\"\u003eRadium Triple Catch Can Kit, R35 GT-R (20-0566-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-feed-kit-w-microglass-filter-nissan-gt-r-r35\"\u003eRadium Fuel Hanger Feed Kit, R35 GT-R (20-0851)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoesn't deal with blow-by from the PCV valve side. Radium recommends pairing it with the 20-0565-FL PCV kit\u003c\/li\u003e\n\u003cli\u003eCheck the dipsticks from 3–4 weeks and empty as needed by unscrewing the lower reservoirs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan R35 GT-R\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764974879022,"sku":"20-0555-FL","price":716.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0555-FL.jpg?v=1792383517"},{"product_id":"radium-fuel-brake-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34","title":"Radium Fuel Brake Line Retainer Kit - Nissan Silvia S13, S14, S15\/Skyline R32, R33, R34","description":"\u003ch2\u003eRadium Fuel and Brake Line Retainer Kit, Nissan S13 \/ S14 \/ S15 \/ R32 \/ R33 \/ R34\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia \/ 180SX \/ 200SX S13, S14, S15 and Skyline R32, R33, R34 (RHD and LHD)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0626\u003c\/p\u003e\u003cp\u003eSwaps the brittle factory plastic retainers under the car for anodised billet clamshells. They're sized to hold the factory hard lines plus bigger aftermarket feed and return lines, like Radium's 8AN feed and 6AN return, running the length of the car. They bolt into the OEM locations with stainless hardware. It's a tidy finishing touch on any S-chassis or Skyline drift or street build running an upgraded fuel system.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-hicas-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34\"\u003eRadium HICAS Line Retainer Kit (20-0627)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-s14-s15-silvia-r33-r34-skyline\"\u003eRadium Fuel Hanger Plumbing Kit, S14 \/ S15 \/ R33 \/ R34 (20-0702)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-silvia-s13-180sx-s13-skyline-r32\"\u003eRadium Fuel Hanger Plumbing Kit, S13 \/ R32 (20-0703)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSome cars only use 7 of the 8 retainers\u003c\/li\u003e\n\u003cli\u003eNot for HICAS lines. Use the HICAS kit (20-0627)\u003c\/li\u003e\n\u003cli\u003eCheck your hose OD against the retainer dimensions, since hose type alone won't tell you the size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan S13 Silvia \/ 180SX \/ 200SX \/ 240SX (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan S14 Silvia \/ 200SX \/ 240SX (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan S15 Silvia \/ 200SX (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 \/ R33 \/ R34 (RHD and LHD)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764975042862,"sku":"20-0626","price":471.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0626_781410fc-fc38-4675-a008-eadabb77cf53.jpg?v=1792383519"},{"product_id":"radium-high-flow-fuel-filter-kit-nissan-silvia-s13-s14-s14-skyline-r32-r33-r34","title":"Radium High Flow Fuel Filter Kit - Nissan Silvia S13, S14, S14\/Skyline R32, R33, R34","description":"\u003ch2\u003eRadium High Flow Fuel Filter Kit, Nissan Silvia \/ Skyline\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S12, S13, S14, S15, Skyline R32 \/ R33 \/ R34, S130 280ZX (RHD and LHD)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0585-03 (10 micron stainless), 20-0585-05 (6 micron microglass)\u003c\/p\u003e\u003cp\u003eA direct replacement for the factory Nissan filter between the pump and the rail. It bolts to the factory chassis studs, takes under an hour with a couple of spanners, and needs no cutting. It's less restrictive than the OEM filter, so the pump runs cooler and flows more. It's a simple upgrade for any SR or RB build on E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-replacement-fuel-filter-element\"\u003eRadium Replacement Filter Element (18-0025)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-s14-s15-silvia-r33-r34-skyline\"\u003eRadium Fuel Hanger Plumbing Kit, S14 \/ S15 \/ R33 \/ R34 (20-0702)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe two kits differ only in the filter element\u003c\/li\u003e\n\u003cli\u003eSuits both RHD and LHD cars\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan S13 Silvia \/ 180SX \/ 200SX, S14 Silvia \/ 200SX, S15 Silvia \/ 200SX\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32, R33, R34 (all models)\u003c\/li\u003e\n\u003cli\u003eNissan S12 Silvia \/ 200SX \/ Gazelle\u003c\/li\u003e\n\u003cli\u003eNissan S130 280ZX\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"10 Micron Stainless","offer_id":67764975239470,"sku":"20-0585-03","price":384.99,"currency_code":"AUD","in_stock":true},{"title":"6 Micron Microglass","offer_id":67764975272238,"sku":"20-0585-05","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0585.jpg?v=1792383520"},{"product_id":"radium-fuel-pump-hanger-nissan-200sx-s14-s15-skyline-r33-r34","title":"Radium Fuel Pump Hanger - Nissan 200SX S14, S15\/Skyline R33, R34","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Nissan Silvia S14 \/ S15, Skyline R33 \/ R34\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia \/ 200SX S14 and S15, Skyline R33 and R34 (all models, RHD and LHD)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0630-00 (Walbro GSS342 \/ AEM 50-1200 style pumps), 20-0632-00 (Walbro F900-series and brushless pumps)\u003c\/p\u003e\n\u003cp\u003eThe factory pump assembly in an S14, S15 or R33\/R34 is long past its best on a built SR20 or RB running E85. This hanger replaces it completely and runs one or two aftermarket pumps, including brushless, with the pumps sitting at the bottom of the tank. The factory level sender, low fuel switch and (on OBD-II cars) fuel temperature sensor all stay.\u003c\/p\u003e\n\u003cp\u003eAn integrated jet pump scavenges fuel from the passenger side of the saddle tank. Radium redesigned the siphon so it doesn't choke the return when you run high-flow pumps, keeping return backpressure in check. Factory quick-connect and barb lines connect directly, so it's equally at home in a street car, a drift car or a time attack Skyline.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-s14-s15-silvia-r33-r34-skyline\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – S14 \/ S15 \/ R33 \/ R34 (20-0702)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-surge-tank-add-on-nissan-200sx-s14-s15-skyline-r33-r34\"\u003eRadium Fuel Hanger Surge Tank Add-On – S14 \/ S15 \/ R33 \/ R34 (20-0700)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003eRadium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)\u003c\/a\u003e – for AEM 50-1230 \/ 50-1235\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003eRadium Check Valve, 6AN ORB to 10mm Barb (20-1534)\u003c\/a\u003e – for Walbro F90000295 \/ Ti E5LM\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-pump-outlet-adapter-check-valve-with-10mm-barb\"\u003eRadium Pump Outlet Adapter with Check Valve, 10mm Barb (20-0798)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – one kit per pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps and fuel pressure regulator are not included.\u003c\/li\u003e\n\u003cli\u003e20-0630-00 suits Walbro GSS342, AEM 50-1200, 50-1230 and 50-1235. The AEM 50-1230 \/ 50-1235 have no internal check valve and need 20-1533.\u003c\/li\u003e\n\u003cli\u003e20-0632-00 suits Walbro F90000267, F90000274, F90000285, F90000295 and Ti E5LM brushless. The F90000295 and E5LM need 20-1534.\u003c\/li\u003e\n\u003cli\u003eIf you run aftermarket AN hose, use low-profile swivel fittings (sold separately). Straight fittings may not clear the access cover.\u003c\/li\u003e\n\u003cli\u003eThe jet pump uses 15–45 lph depending on pressure. Allow for this when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eSingle-pump installs can reuse OEM wiring, but upgraded wiring is recommended so the pumps see full voltage.\u003c\/li\u003e\n\u003cli\u003eComes partly assembled. Final assembly is done during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S14 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S15 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R33 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R34 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan 240SX S14 (LHD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Nissan \/ Walbro GSS342\/AEM 50-1200","offer_id":67764975403310,"sku":"20-0630-00","price":925.99,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Walbro F90000267\/274\/285\/295","offer_id":67764975436078,"sku":"20-0632-00","price":925.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0630.webp?v=1792383521"},{"product_id":"radium-hicas-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34","title":"Radium HICAS Line Retainer Kit - Nissan Silvia S13, S14, S15\/Skyline R32, R33, R34","description":"\u003ch2\u003eRadium HICAS Line Retainer Kit, Nissan S13 \/ S14 \/ S15 \/ R32 \/ R33 \/ R34\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e HICAS-equipped Nissan Silvia \/ 180SX \/ 200SX S13, S14, S15 and Skyline R32, R33, R34 (RHD and LHD)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0627\u003c\/p\u003e\u003cp\u003eThe factory HICAS rear-steer lines share the plastic retainers with the fuel and brake lines. Once those come out for Radium's billet fuel line retainers, the HICAS lines are left hanging. These five black anodised billet clamps hold them neatly. The HICAS lines are fixed solidly at each end, so the clamps don't need to bolt to the body. Spaced evenly along the lines, they stop them sagging.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-brake-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34\"\u003eRadium Fuel and Brake Line Retainer Kit, Nissan (20-0626)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOnly for HICAS-equipped cars\u003c\/li\u003e\n\u003cli\u003eSpace all five clamps evenly along the lines\u003c\/li\u003e\n\u003cli\u003eUse thread locker on the bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan S13 Silvia \/ 180SX \/ 200SX \/ 240SX with HICAS (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan S14 Silvia \/ 200SX \/ 240SX with HICAS (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan S15 Silvia \/ 200SX with HICAS (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 \/ R33 \/ R34 with HICAS (RHD and LHD)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764975468846,"sku":"20-0627","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0627.jpg?v=1792383521"},{"product_id":"radium-pcv-fluid-lock-catch-can-kit-nissan-silvia-200sx-s15-sr20det","title":"Radium PCV Fluid Lock Catch Can Kit - Nissan Silvia\/200SX S15 (SR20DET)","description":"\u003ch2\u003eRadium Fluid Lock PCV Catch Can Kit, Nissan S15 200SX \/ Silvia (SR20DET)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S15 200SX and Silvia, SR20DET\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0635-FL\u003c\/p\u003e\u003cp\u003eAt idle, cruise and on decel, manifold vacuum pulls crankcase vapour, unburnt fuel and oil through the S15's PCV valve into the intake. This kit puts a Fluid Lock can inline between the PCV valve and the manifold to catch it, keeping the manifold and throttle body clean.\u003c\/p\u003e\u003cp\u003eIt mounts to three factory threaded bosses in the right-hand corner near the firewall, with no drilling. It's a closed-loop system with nothing vented to atmosphere, and the can is pressure sealed so no check valve is needed on boost. Radium recommends pairing it with the CCV kit.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fluid-lock-ccv-catch-can-kit-nissan-silvia-200sx-s15-sr20det\"\u003eRadium Fluid Lock CCV Catch Can Kit, S15 (20-0636-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-catch-can-kit-nissan-silvia-200sx-s15-sr20det\"\u003eRadium Dual Fluid Lock Catch Can Kit, S15 (20-0637-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-nissan-200sx-s14-s15-skyline-r33-r34\"\u003eRadium Fuel Pump Hanger, S14 \/ S15 \/ R33 \/ R34\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo extra inline check valve needed. Radium cans are pressure sealed\u003c\/li\u003e\n\u003cli\u003eRadium recommends pairing this kit with the CCV kit (20-0636-FL)\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick after 3–4 weeks and adjust from there. PCV cans usually fill faster than CCV cans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 200SX S15\u003c\/li\u003e\n\u003cli\u003eNissan Silvia S15\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764975501614,"sku":"20-0635-FL","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0635-FL_1f4bfde0-8bcd-4198-acaa-84354f36661b.jpg?v=1792383522"},{"product_id":"radium-fuel-pump-hanger-nissan-gt-r-r35","title":"Radium Fuel Pump Hanger - Nissan GT-R R35","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Nissan GT-R R35\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan GT-R R35\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0572\u003c\/p\u003e\n\u003cp\u003eBig-power R35s on E85 need more pump than the factory unit can give, and the saddle tank's twin OEM jet pumps become a restriction once you upgrade. This drop-in hanger holds up to three 39mm pumps, brushed or brushless, with no permanent changes to the car. The pumps feed from an anodised collector box with three one-way fill valves (1065 lph combined), so they stay covered during launches and hard cornering.\u003c\/p\u003e\n\u003cp\u003eRadium has rerouted the jet pump plumbing so the siphons still work without restricting the regulator return, which keeps fuel pressure stable. Swivel adapters and short 6AN PTFE hoses connect to the OEM hard lines, and the factory temperature and level sensors are reused. It's the hanger of choice for high-power GT-Rs at the drag strip and on the street.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-feed-kit-w-microglass-filter-nissan-gt-r-r35\"\u003eRadium Fuel Hanger Feed Kit with Microglass Filter – R35 (20-0851-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-feed-kit-nissan-r35-gt-r-stainless-filter\"\u003eRadium Fuel Hanger Feed Kit with Stainless Filter – R35 (20-0851-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-gt-r-r35\"\u003eRadium Fuel Rail Kit – Nissan GT-R R35 (20-0556-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are not included. Radium-verified pumps: AEM 50-1200, Walbro GSS342, Injector Dynamics BPC100 and Ti Automotive BKS1001 (E5LM) brushless.\u003c\/li\u003e\n\u003cli\u003eThe factory post-pump filter is removed, so you must fit an aftermarket filter downstream (the 20-0851 feed kits cover this).\u003c\/li\u003e\n\u003cli\u003eRadium lists the 20-0851 feed kits as LHD only. Australian GT-Rs are RHD, so email us to confirm plumbing before ordering.\u003c\/li\u003e\n\u003cli\u003eThe jet pumps use roughly 15–45 lph depending on pressure. Allow for this when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eEach brushless pump needs its own controller. Two pumps can sometimes run off OEM wiring, but a third needs custom wiring.\u003c\/li\u003e\n\u003cli\u003eWe recommend reading the installation instructions before you buy. Email us for a copy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan GT-R R35 (all years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764976320814,"sku":"20-0572","price":1432.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0572_c1f42469-29a7-48e8-a1ef-5e34894d7f62.jpg?v=1792383524"},{"product_id":"radium-fuel-rail-kit-nissan-gt-r-r35","title":"Radium Fuel Rail Kit - Nissan GT-R R35","description":"\u003ch2\u003eRadium Fuel Rail Kit – Nissan GT-R R35\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan GT-R R35 (VR38DETT)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0556-02\u003c\/p\u003e\u003cp\u003eBig-turbo and E85 R35s quickly reach the limit of the factory rails. These billet replacements give each bank a large internal bore to keep all six injectors fed at high power, and because they mount to the lower intake manifold they're shorter and less restrictive than the OEM rails – ideal for street, drag and roll-racing GT-Rs.\u003c\/p\u003e\u003cp\u003eEach rail has four 8AN ORB ports (two at the ends, two on top), giving eight in total for feed, return, dampers and sensors. Thermal spacers and washers keep heat from the intake manifold out of the fuel, and the factory injector clips can be reused.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/injector-dynamics-xds-injectors-6-cyl-set-nissan-gt-r-r35-nissan-370z\"\u003eInjector Dynamics XDS Injectors – 6-Cyl Set, Nissan GT-R R35\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-v2-fpd-r-fuel-pulse-damper-8an-orb\"\u003eRadium V2 FPD-R Fuel Pulse Damper, 8AN ORB\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts to the lower intake manifold and reuses the OEM injector clips.\u003c\/li\u003e\n\u003cli\u003eFittings, fuel hose, injectors and fuel pressure regulator are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan GT-R R35 2007+ (VR38DETT)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764976714030,"sku":"20-0556-02","price":611.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0556-02.jpg?v=1792383524"},{"product_id":"radium-dual-fluid-lock-catch-can-kit-nissan-silvia-200sx-s15-sr20det","title":"Radium Dual Fluid Lock Catch Can Kit - Nissan Silvia\/200SX S15 (SR20DET)","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Nissan S15 200SX \/ Silvia (SR20DET)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S15 200SX and Silvia, SR20DET\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0637-FL\u003c\/p\u003e\u003cp\u003eThis is Radium's recommended setup for the S15: the PCV kit (20-0635-FL) and CCV kit (20-0636-FL) together. The PCV can sits on three factory bosses in the right-hand corner near the firewall and catches what manifold vacuum draws in at idle, cruise and on decel. The CCV can mounts on the wiper motor mounts and catches the oil the crankcase vent pushes into the intake pipe and intercooler under boost.\u003c\/p\u003e\u003cp\u003eIt's a closed-loop system with nothing vented to atmosphere, and both cans are pressure sealed so no check valve is needed. Both bolt in with no drilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-nissan-200sx-s14-s15-skyline-r33-r34\"\u003eRadium Fuel Pump Hanger, S14 \/ S15 \/ R33 \/ R34\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo extra inline check valve needed. Radium cans are pressure sealed\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks after 3–4 weeks and adjust from there. The PCV can usually fills faster than the CCV can\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to high blow-by, an overfilled sump, poor breather placement or a PCV valve not sealing under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 200SX S15\u003c\/li\u003e\n\u003cli\u003eNissan Silvia S15\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764976943406,"sku":"20-0637-FL","price":786.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0637-FL_5b993eda-70a7-469e-8d87-55f9b802ef79.jpg?v=1792383525"},{"product_id":"radium-fuel-level-sender-adaptor-nissan-350z-z33-nissan-skyline-v35","title":"Radium Fuel Level Sender Adaptor - Nissan 350Z Z33\/Nissan Skyline V35","description":"\u003ch2\u003eRadium Early Fuel Level Sender Adapter – Nissan 350Z \/ Skyline V35\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Early Nissan 350Z Z33 and Skyline V35 coupe with the early-style OEM level sender\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0596\u003c\/p\u003e\n\u003cp\u003eEarly 350Zs and V35 coupes use a different fuel level sender from later cars, and it won't bolt straight to the stainless bracket supplied with the Radium FHST. This adapter mounts the early sender to that bracket, so your factory fuel gauge keeps working after the upgrade.\u003c\/p\u003e\n\u003cp\u003eLater cars with the updated sender don't need it, so check your build date below before ordering.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fhst-fuel-hanger-surge-tank-350z-g35\"\u003eRadium FHST Fuel Hanger Surge Tank – 350Z \/ G35 (20-1830)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOnly needed with the early-style OEM sender. Later cars don't need it.\u003c\/li\u003e\n\u003cli\u003eSome V36 Skyline, G37, Q50 and Q60 models use the \u003ca href=\"\/products\/radium-fuel-level-adapter-nissan-skyline-v36-infiniti-g37-q50-q60\"\u003e20-0896 adapter\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003cli\u003eThe Radium FHST is sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan 350Z \/ Fairlady Z Z33 (Jan 2002 – Jan 2004 build)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline V35 coupe (Jan 2001 – Mar 2003 build)\u003c\/li\u003e\n\u003cli\u003eInfiniti G35 coupe (Jan 2001 – Mar 2003 build)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764976910638,"sku":"20-0596","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0596_83d69927-44c1-4137-97a7-6199069976ac.jpg?v=1792383525"},{"product_id":"radium-brake-master-cylinder-brace-nissan-skyline-r32-inc-gts-t-gt-r","title":"Radium Brake Master Cylinder Brace - Nissan Skyline R32 Inc GTS-T\/GT-R","description":"\u003ch2\u003eRadium Brake Master Cylinder Brace, Nissan Skyline R32\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Skyline R32 GTS-T, GTS-4 and GT-R (RHD)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0586\u003c\/p\u003e\u003cp\u003eWhen you press the brake pedal, some of the effort is lost flexing the thin firewall. This brace stops that flex, so more pedal force reaches the brakes, giving a firmer pedal under hard use. It's CNC-machined from 6061 as one solid piece, so there's no secondary flex, and it uses three mounting points on different planes. It bolts to the strut tower using factory threads, with no cutting or drilling. The large aluminium preload adjuster won't damage the master cylinder, and a stainless lock nut holds the setting.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for RHD R32 Skylines\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan Skyline R32 GTS-T\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 GTS-4\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 GT-R\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977008942,"sku":"20-0586","price":174.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0586.jpg?v=1792383526"},{"product_id":"radium-fluid-lock-ccv-catch-can-kit-nissan-silvia-200sx-s15-sr20det","title":"Radium Fluid Lock CCV Catch Can Kit - Nissan Silvia\/200SX S15 (SR20DET)","description":"\u003ch2\u003eRadium Fluid Lock CCV Catch Can Kit, Nissan S15 200SX \/ Silvia (SR20DET)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S15 200SX and Silvia, SR20DET\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0636-FL\u003c\/p\u003e\u003cp\u003eUnder boost, the SR20DET's crankcase vent pushes oil and sludge into the intake pipe and intercooler. This kit catches it with a Fluid Lock can inline between the crankcase vent port and the intake pipe, then sends clean air back to the intake so the factory CCV system keeps working.\u003c\/p\u003e\u003cp\u003eThe can mounts to two of the wiper motor mounts with a Nissan-specific bracket and no drilling. It's a closed-loop system with nothing vented to atmosphere. Radium recommends pairing it with the PCV kit (20-0635-FL).\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-pcv-fluid-lock-catch-can-kit-nissan-silvia-200sx-s15-sr20det\"\u003eRadium PCV Fluid Lock Catch Can Kit, S15 (20-0635-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-catch-can-kit-nissan-silvia-200sx-s15-sr20det\"\u003eRadium Dual Fluid Lock Catch Can Kit, S15 (20-0637-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCovers the CCV side only. It doesn't deal with blow-by on the PCV valve side\u003c\/li\u003e\n\u003cli\u003eRadium recommends pairing it with the PCV kit (20-0635-FL)\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick after 3–4 weeks and adjust from there\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 200SX S15\u003c\/li\u003e\n\u003cli\u003eNissan Silvia S15\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977074478,"sku":"20-0636-FL","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0636-FL_8225f948-3fab-4e05-af2d-71f5ea03f625.jpg?v=1792383526"},{"product_id":"radium-dual-pcv-ccv-fluid-lock-catch-can-kit-nissan-skyline-gt-r-r32","title":"Radium Dual PCV\/CCV Fluid Lock Catch Can Kit - Nissan Skyline GT-R R32","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Nissan Skyline GT-R R32 (RB26DETT)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Skyline GT-R R32, RB26DETT\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0590-FL\u003c\/p\u003e\u003cp\u003eThe RB26's factory breather system sends a lot of oil into the intake piping, intercoolers and plenum, especially once it's making real boost. This kit keeps Nissan's true closed-loop system but adds a catch can on both the PCV side and the crankcase vent side. A big 10AN crossover hose balances the intake and exhaust sides of the crankcase the way Nissan intended.\u003c\/p\u003e\u003cp\u003eTwo double-ended press-in fittings replace the valve cover vents. The PCV can mounts on the front right strut tower bosses, and the CCV can mounts to the wiper motor on the left of the firewall. Nothing vents to atmosphere, both cans use the patented Fluid Lock design, and there's no drilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-surge-tank-fhst-nissan-skyline-r32-gt-r\"\u003eRadium Fuel Hanger Surge Tank, R32 GT-R\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-skyline-gts-t-gt-r-r32-gt-r-r33-r34-rb20-rb26\"\u003eRadium Fuel Rail Plumbing Kit, RB20 \/ RB26 (20-0217-PK)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-hicas-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34\"\u003eRadium HICAS Line Retainer Kit (20-0627)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe PCV can works with the factory engine bay battery\u003c\/li\u003e\n\u003cli\u003eThe CCV can works on cars with factory ABS\u003c\/li\u003e\n\u003cli\u003eIf the factory wastegate boost solenoid is still in use, it must be relocated\u003c\/li\u003e\n\u003cli\u003eNo extra inline check valve needed. Radium cans are pressure sealed\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks after 3–4 weeks. The PCV can usually fills faster than the CCV can\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to high blow-by, an overfilled sump, poor breather placement or a PCV valve not sealing under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan Skyline GT-R R32, RB26DETT\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977107246,"sku":"20-0590-FL","price":1083.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0590-FL.jpg?v=1792383527"},{"product_id":"radium-fuel-rail-nissan-skyline-gt-t-r34-stagea-s2-rb25det-neo","title":"Radium Fuel Rail - Nissan Skyline GT-T R34\/Stagea S2 (RB25DET Neo)","description":"\u003ch2\u003eRadium Fuel Rail – Nissan RB25DET NEO\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Skyline R34 GT-T, Stagea WC34 Series 2 (RB25DET NEO)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0537\u003c\/p\u003e\u003cp\u003eThe RB25DET NEO is a staple of Australian drift and street builds, and once it's running a bigger turbo or E85 the factory rail can't keep up. This replacement has a 17.5mm centre bore that supports everything from a stock NEO to a heavily built one, keeping fuel pressure even across all six cylinders.\u003c\/p\u003e\u003cp\u003eFour 8AN ORB ports – one at each end and two underneath – let you plumb it to suit your fuel system, and the two centre ports are ready for Radium FPD-R pulse dampers. The rail is CNC-machined from extruded 6063 aluminium, black anodised and laser etched, and comes with mounting feet, stainless hardware and thermal insulating spacers.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-v2-fpd-r-fuel-pulse-damper-8an-orb\"\u003eRadium V2 FPD-R Fuel Pulse Damper, 8AN ORB\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits the RB25DET NEO only – not the earlier R33-style RB25DET.\u003c\/li\u003e\n\u003cli\u003eFittings, injectors and fuel pressure regulator are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan Skyline R34 GT-T (ER34) 1998–2002\u003c\/li\u003e\n\u003cli\u003eNissan Stagea WC34 Series 2 (RB25DET NEO)\u003c\/li\u003e\n\u003cli\u003eRB25DET NEO engine swaps\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977140014,"sku":"20-0537","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0537.jpg?v=1792383527"},{"product_id":"radium-fuel-hanger-feed-kit-w-microglass-filter-nissan-gt-r-r35","title":"Radium Fuel Hanger Feed Kit w\/Microglass Filter - Nissan GT-R R35","description":"\u003ch2\u003eRadium Fuel Hanger Feed Kit with Microglass Filter, Nissan GT-R R35\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan GT-R R35 with the Radium R35 hanger and Radium R35 fuel rails\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0851-05\u003c\/p\u003e\u003cp\u003eOn a big-power R35 the factory feed lines can become the restriction. This kit runs new PTFE lines straight from the Radium hanger to Radium rails, and reuses the factory feed line as the regulator return. Because space is tight, the 10AN pump outlet splits into two parallel 6AN lines under the car, held in billet retainers on OEM hardware.\u003c\/p\u003e\u003cp\u003eThe lines pass through a serviceable 6 micron microglass filter with a check valve, mounted behind a GT-R-specific heat shield.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-gt-r-r35\"\u003eRadium Fuel Rail Kit, GT-R R35 (20-0556-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-feed-kit-nissan-r35-gt-r-stainless-filter\"\u003eRadium R35 Feed Kit, Stainless Filter (20-0851-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium lists this kit for LHD cars only. Email us before ordering for an Australian-delivered or JDM RHD GT-R\u003c\/li\u003e\n\u003cli\u003eFuel rails not included\u003c\/li\u003e\n\u003cli\u003eNeeded with the Radium hanger, as the factory post-pump filter is removed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan GT-R R35 (LHD per Radium)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977205550,"sku":"20-0851-05","price":1118.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0851-05.jpg?v=1792383528"},{"product_id":"radium-fuel-line-retaining-kit-nissan-gt-r-r35","title":"Radium Fuel Line Retaining Kit - Nissan GT-R R35","description":"\u003ch2\u003eRadium Fuel Line Retaining Kit, Nissan GT-R R35\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan GT-R R35\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0560\u003c\/p\u003e\u003cp\u003eFive billet retainers that run up to two aftermarket fuel lines under an R35, in their own channel clear of the factory fuel and brake lines. They usually go on the right-hand side but can go on the left. They bolt to five OEM threaded holes with OEM hardware, with no drilling, and take hose up to 22.6mm OD. That covers Radium's 6AN, 8AN and 10AN PTFE.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-feed-kit-nissan-r35-gt-r-stainless-filter\"\u003eRadium R35 Feed Kit, Stainless Filter (20-0851-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-feed-kit-w-microglass-filter-nissan-gt-r-r35\"\u003eRadium R35 Feed Kit, Microglass Filter (20-0851-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel lines not included\u003c\/li\u003e\n\u003cli\u003eMaximum hose OD 22.6mm. Tested with Radium 6AN, 8AN and 10AN PTFE hose. Other hose types are unconfirmed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan GT-R R35\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977172782,"sku":"20-0560","price":244.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0560_e6c971c8-b4b5-4966-9aaa-d6c92e5fa68d.jpg?v=1792383528"},{"product_id":"radium-coolant-expansion-tank-kit-nissan-gt-r-r35","title":"Radium Coolant Expansion Tank Kit - Nissan GT-R R35","description":"\u003ch2\u003eRadium Coolant Expansion Tank Kit, Nissan GT-R R35\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan R35 GT-R\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0557\u003c\/p\u003e\u003cp\u003eReplaces the R35's plastic coolant expansion tank, which can fail under constant heat cycling. The two-piece CNC-machined, anodised aluminium tank is stronger and conducts heat better, which suits track use. A custom bracket bolts to existing threaded holes and adapter fittings connect to the factory lines, so there are no permanent modifications. It works the same as the factory tank, but it's smaller, freeing up space and making servicing easier. Inside, two chambers are linked top and bottom, and an internal swirl feature helps de-aerate the system.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-radiator-cap-type-a-black\"\u003eRadium Radiator Cap, Type A, Black (18-0076-A13)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory Nissan cap (1.37 bar) can be reused. A Radium Type-A cap is optional and sold separately\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan R35 GT-R\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977336622,"sku":"20-0557","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0557_3b78a1c0-290f-4f03-aa4e-9835d798d3db.jpg?v=1792383530"},{"product_id":"radium-catch-can-kit-pcv-nissan-r35-gt-r-fluid-lock","title":"Radium Catch Can Kit, PCV, Nissan R35 GT-R, Fluid Lock","description":"\u003ch2\u003eRadium Fluid Lock PCV Catch Can Kit, Nissan R35 GT-R\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan R35 GT-R (2008–2011 cars need the OEM strut bar)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0565-FL\u003c\/p\u003e\u003cp\u003eAt idle, cruise and on decel, the R35's PCV hose sees vacuum, which pulls crankcase vapour, unburnt fuel and oil sludge into the intake manifold. This kit puts a single Fluid Lock can inline between the PCV valve and the manifold to catch it. It sits on the left side of the engine bay near the brake master cylinder.\u003c\/p\u003e\u003cp\u003eThe can is pressure sealed, so it connects straight to the manifold without a check valve. The patented Fluid Lock design stops it overfilling into the intake. Radium recommends running it with the dual CCV kit, or going straight to the triple kit.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-catch-can-kit-ccv-nissan-r35-gt-r-fluid-lock\"\u003eRadium Dual CCV Catch Can Kit, R35 GT-R (20-0555-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-triple-catch-can-kit-nissan-r35-gt-r-fluid-lock\"\u003eRadium Triple Catch Can Kit, R35 GT-R (20-0566-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-gt-r-r35\"\u003eRadium Fuel Rail Kit, R35 GT-R (20-0556-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot a direct fit on 2008–2011 GT-Rs without the OEM strut bar\u003c\/li\u003e\n\u003cli\u003eRHD cars may need some modification to mount the PCV can. Email us before ordering\u003c\/li\u003e\n\u003cli\u003eNo inline check valve needed. Radium cans are pressure sealed\u003c\/li\u003e\n\u003cli\u003ePCV cans usually collect more than CCV cans. Check the dipstick from 3–4 weeks and empty by unscrewing the lower reservoir\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan R35 GT-R (2008–2011 cars need the OEM strut bar)\u003c\/li\u003e\n\u003cli\u003eRHD cars may need mounting modifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977303854,"sku":"20-0565-FL","price":366.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0565-FL.jpg?v=1792383530"},{"product_id":"radium-fuel-filter-mounting-kit-nissan-gt-r-r35","title":"Radium Fuel Filter Mounting Kit - Nissan GT-R R35","description":"\u003ch2\u003eRadium Fuel Filter Mounting Kit, Nissan GT-R R35\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan GT-R R35\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0559\u003c\/p\u003e\u003cp\u003eA bracket, heat shield and billet 60mm clamp for mounting a Radium filter on the R35. It bolts to existing chassis bosses, well away from the hot downpipes, and a separate bracket secures the hoses further forward. All hardware is stainless, there are no permanent modifications, and the clamp also holds a Bosch 044.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-high-flow-fuel-filter\"\u003eRadium High Flow Fuel Filter (20-0220)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-gt-r-r35\"\u003eRadium Fuel Rail Kit, GT-R R35 (20-0556-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel filter not included. Fuel lines and fittings must be configured to suit your system\u003c\/li\u003e\n\u003cli\u003eRadium doesn't state RHD fitment. Email us to confirm on Australian RHD cars before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan GT-R R35\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764977369390,"sku":"20-0559","price":305.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0559.jpg?v=1792383530"},{"product_id":"radium-side-feed-conversion-fuel-rail-kit-nissan-silvia-180sx-s13-sr20det","title":"Radium Top Feed Conversion Fuel Rail Kit - Nissan Silvia\/180SX S13 (SR20DET)","description":"\u003ch2\u003eRadium Top Feed Conversion Fuel Rail – Nissan SR20DET S13\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia S13 \/ 180SX (SR20DET, S13 RWD intake manifold)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0558\u003c\/p\u003e\u003cp\u003eThe S13 SR20DET's factory side-feed injectors limit you to a small range of injectors once you add boost or E85. This kit converts the engine to top feed, so you can run modern high-flow injectors – the go-to upgrade for S13 and 180SX drift, grip and street builds.\u003c\/p\u003e\u003cp\u003eThe CNC-machined rail has a 17.5mm internal bore and a black satin anodised finish safe for all petrol and alcohol blends, and it bolts to the factory rail mounting points. Billet aluminium injector seats press into the intake manifold to seal the top-feed injectors. There are 8AN ORB ports at each end and underneath, an extra centre-bottom port for a pulse damper, and a 1\/8in NPT gauge port on top.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-v2-fpd-r-fuel-pulse-damper-8an-orb\"\u003eRadium V2 FPD-R Fuel Pulse Damper, 8AN ORB\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-injector-seats-nissan-25mm-30mm\"\u003eRadium Injector Seats, Nissan, 25mm \/ 30mm (spares)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the S13 SR20DET RWD intake manifold; it may also suit aftermarket manifolds that use the OEM fuel rail.\u003c\/li\u003e\n\u003cli\u003eInjectors, fittings and fuel pressure regulator are not included – check injector fitment with us before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan Silvia S13 (SR20DET)\u003c\/li\u003e\n\u003cli\u003eNissan 180SX RPS13 (SR20DET)\u003c\/li\u003e\n\u003cli\u003eSR20DET swaps using the S13 RWD intake manifold\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764978319662,"sku":"20-0558","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0558.jpg?v=1792383531"},{"product_id":"radium-fuel-hanger-plumbing-kit-w-filter-nissan-s14-s15-silvia-r33-r34-skyline","title":"Radium Fuel Hanger Plumbing Kit w\/Filter - Nissan S14 S15 Silvia \/ R33 R34 Skyline","description":"\u003ch2\u003eRadium Fuel Hanger Plumbing Kit with Filter, Nissan S14 \/ S15 \/ R33 \/ R34\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S14 \/ S15 Silvia, 200SX and R33 \/ R34 Skyline (RHD and LHD) with the Radium late Nissan hanger\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0702-03 (10 micron stainless), 20-0702-05 (6 micron microglass)\u003c\/p\u003e\u003cp\u003eEverything between a Radium late Nissan hanger and an aftermarket rail and regulator, for SR20 and RB25 drift and street builds. An 8AN feed runs from the hanger through a Radium filter in the stock location to a 90° PushLok end for your rail. A 6AN return comes back from the regulator. Both lines run in billet retainers and clear the OEM pump cover with no cutting. Either line can be modified to add an inline flex fuel sensor.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-nissan-200sx-s14-s15-skyline-r33-r34\"\u003eRadium Fuel Pump Hanger, S14 \/ S15 \/ R33 \/ R34 (20-0630-00 \/ 20-0632-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-surge-tank-add-on-nissan-200sx-s14-s15-skyline-r33-r34\"\u003eRadium FHST Add-On, S14 \/ S15 \/ R33 \/ R34 (20-0700 \/ 20-0701)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-brake-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34\"\u003eRadium Fuel and Brake Line Retainer Kit, Nissan (20-0626)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot designed for the stock fuel rail\u003c\/li\u003e\n\u003cli\u003eAftermarket rail, FPR and their 8AN \/ 6AN male fittings not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan S14 Silvia \/ 200SX \/ 240SX (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan S15 Silvia \/ 200SX (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan R33 and R34 Skyline (RHD and LHD)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"10 Micron Stainless","offer_id":67764991099182,"sku":"20-0702-03","price":1083.99,"currency_code":"AUD","in_stock":true},{"title":"6 Micron Microglass","offer_id":67764991131950,"sku":"20-0702-05","price":1048.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0702.jpg?v=1792383578"},{"product_id":"radium-fuel-pump-access-cover-nissan-s13-silvia-180sx-skyline-r32","title":"Radium Fuel Pump Access Cover, Nissan S13 Silvia \/ 180SX \/ Skyline R32","description":"\u003ch2\u003eRadium Fuel Pump Access Cover, Nissan S13 \/ 180SX \/ R32 Skyline\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S13 Silvia, 180SX, 200SX, 240SX and R32 Skyline (RHD and LHD)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0735\u003c\/p\u003e\u003cp\u003eA direct replacement for the factory steel pump access plate on S13s and R32s. It's laser-etched anodised aluminium with a clear, scratch- and UV-resistant window, so you can see the pump module at a glance. It seals to the floor with an adhesive foam strip and countersunk stainless screws.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTake care during installation not to damage the clear window\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan S13 Silvia \/ 180SX \/ 200SX \/ 240SX (RHD and LHD)\u003c\/li\u003e\n\u003cli\u003eNissan R32 Skyline incl. GT-R (RHD and LHD)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764991033646,"sku":"20-0735","price":139.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0735.jpg?v=1792383578"},{"product_id":"radium-fuel-pump-hanger-nissan-180-sx-silvia-s13-skyline-r32-gts-gts-t","title":"Radium Fuel Pump Hanger - Nissan 180 SX, Silvia S13\/Skyline R32 GTS, GTS-T","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Nissan Silvia S13 \/ 180SX \/ Skyline R32\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia S13, 180SX, 200SX and Skyline R32 GTS \/ GTS-T \/ GTS-4 (not GT-R)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0730-00 (Walbro GSS342 \/ AEM 50-1000 \/ 50-1200), 20-0732-00 (Walbro F900-series)\u003c\/p\u003e\n\u003cp\u003eThe factory pump module in an S13 or R32 was never designed for a built SR20, CA18 or RB25 swap running E85. This hanger replaces it with no cutting of the body or tank, and runs one, two or three aftermarket pumps in the factory collector bowl. The OEM float and low fuel switch still work, so your gauge reads as normal.\u003c\/p\u003e\n\u003cp\u003eFuel enters through a mesh pre-filter into three separate chambers, so fuel can't pass between pumps and unused ports don't need blocking off. The pumps merge into a single 8AN ORB outlet with integrated check valves, so you can stage pumps on and off. Adapters for the factory lines and AN hose are included, and every port is low enough to clear the floor. A proven setup for Australian drift and street S13s and R32s.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-silvia-s13-180sx-s13-skyline-r32\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – S13 \/ 180SX \/ R32 (20-0703)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – one kit per pump\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-access-cover-nissan-s13-silvia-180sx-skyline-r32\"\u003eRadium Fuel Pump Access Cover – S13 \/ 180SX \/ R32 (20-0735)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are not included. Choose pumps to suit your power target and fuel.\u003c\/li\u003e\n\u003cli\u003eThe listed pumps are verified by Radium. Other similar pumps may fit but aren't verified.\u003c\/li\u003e\n\u003cli\u003eA single GSS342 can reuse the OEM wiring, but upgraded wiring is recommended for full pump output.\u003c\/li\u003e\n\u003cli\u003eDoesn't fit the R32 GT-R. For the GT-R, use the \u003ca href=\"\/products\/radium-fuel-hanger-surge-tank-fhst-nissan-skyline-r32-gt-r\"\u003eR32 GT-R FHST (20-0740)\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eComes partly assembled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia S13 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan 180SX \/ 200SX S13 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 GTS \/ GTS-T – RHD and LHD, excluding GT-R\u003c\/li\u003e\n\u003cli\u003eNissan 240SX S13 (LHD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Nissan \/ Walbro GSS342\/AEM 50-1200","offer_id":67764991230254,"sku":"20-0730-00","price":590.24,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Walbro F90000267\/274\/285\/295","offer_id":67764991263022,"sku":"20-0732-00","price":590.24,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0730.jpg?v=1792383578"},{"product_id":"radium-fuel-rail-kit-nissan-skyline-r32-rb20det","title":"Radium Fuel Rail Kit - Nissan Skyline R32 (RB20DET)","description":"\u003ch2\u003eRadium Fuel Rail – Nissan RB20DET (R32)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Skyline R32 GTS-T (RB20DET silver top, 1989–1993)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0757\u003c\/p\u003e\u003cp\u003eRB20DETs are still a staple of budget drift and street builds, and once they're pushed with a bigger turbo or E85 the factory rail is too small. This high-flow upgrade has a 17.5mm internal bore and is machined from a custom 6063 extrusion with lightweight cut-outs and integrated gusset mounts, then black anodised and laser etched.\u003c\/p\u003e\u003cp\u003eIt's an upgrade rail, not a top feed conversion – the factory injectors can be reused, or any OEM-equivalent injector with an 11mm upper O-ring. Front, rear and centre ports are tapped 8AN ORB, and there's a 1\/8in NPT port for a gauge.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-skyline-gts-t-gt-r-r32-gt-r-r33-r34-rb20-rb26\"\u003eRadium Fuel Rail Plumbing Kit – Nissan RB20 \/ RB26 (20-0217-PK)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-v2-fpd-r-fuel-pulse-damper-8an-orb\"\u003eRadium V2 FPD-R Fuel Pulse Damper, 8AN ORB\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied without fittings – add the 20-0217-PK plumbing kit for a complete bolt-on install.\u003c\/li\u003e\n\u003cli\u003eSuits OEM injectors or equivalents with an 11mm upper O-ring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan Skyline R32 GTS-T 1989–1993 (RB20DET)\u003c\/li\u003e\n\u003cli\u003eRB20DET silver top engine swaps\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764992737582,"sku":"20-0757","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0757.jpg?v=1792383585"},{"product_id":"radium-fuel-hanger-surge-tank-fhst-nissan-skyline-r32-gt-r","title":"Radium Fuel Hanger Surge Tank (FHST), Nissan Skyline R32 GT-R","description":"\u003ch2\u003eRadium Fuel Hanger Surge Tank (FHST) – Nissan Skyline R32 GT-R\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Skyline R32 GT-R (BNR32), RB26DETT\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0740-00 (Walbro GSS342 \/ AEM 50-1000 \/ 50-1200), 20-0741-00 (Ti E5LM brushless), 20-0742-00 (Walbro F900-series)\u003c\/p\u003e\n\u003cp\u003eA built RB26 on E85 needs serious fuel, and the R32 GT-R tank sloshes enough under hard cornering and launches to starve the pumps. The FHST puts a full surge tank inside the factory tank: a lift pump in a stainless collector box keeps it topped up from the bottom of the tank, along with regulator return fuel, while one, two or three high-pressure pumps feed the engine from the surge tank.\u003c\/p\u003e\n\u003cp\u003eBarbs connect straight to the factory rubber hoses, and 8AN feed and 6AN return adapters are included for AN hose, with every port low enough to clear the floor. A replacement OEM Nissan level sender with the resistance the cluster expects is included, so your fuel gauge reads correctly. It's the answer for big-power R32 GT-Rs at the drag strip, on the street or at time attack.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-silvia-s13-180sx-s13-skyline-r32\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – S13 \/ 180SX \/ R32 (20-0703)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – one per extra surge pump\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-fuel-pump-filter-base-adapter-12mm-brushless-pumps-13-1187\"\u003eRadium Fuel Pump Filter Base Adapter – 12mm Brushless (13-1187)\u003c\/a\u003e – for Protec, Fuelab and DW810 pumps\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-skyline-gts-t-gt-r-r32-gt-r-r33-r34-rb20-rb26\"\u003eRadium RB20 \/ RB26 Fuel Rail Plumbing Kit (20-0217-PK)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-hicas-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34\"\u003eRadium HICAS Line Retainer Kit (20-0627)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-access-cover-nissan-s13-silvia-180sx-skyline-r32\"\u003eRadium Fuel Pump Access Cover – S13 \/ 180SX \/ R32 (20-0735)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are sold separately. You need at least one lift pump and one surge pump.\u003c\/li\u003e\n\u003cli\u003eEach extra surge pump needs its own fuse and relay (17-0031). The lift pump runs on the OEM pump wiring. DIY wiring for one pump is included.\u003c\/li\u003e\n\u003cli\u003e20-0742-00 also suits Protec 11928, Fuelab 49614 and DW810 pumps with the 13-1187 adapter.\u003c\/li\u003e\n\u003cli\u003eMixing brushed and brushless pumps is possible on 20-0741-00, but it needs extra socks, fittings and harnesses. Email us and we'll put the parts list together.\u003c\/li\u003e\n\u003cli\u003eFor non-GT-R R32 Skylines, use the \u003ca href=\"\/products\/radium-fuel-pump-hanger-nissan-180-sx-silvia-s13-skyline-r32-gts-gts-t\"\u003eS13 \/ R32 fuel pump hanger (20-0730)\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline R32 GT-R (BNR32), RB26DETT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Nissan \/ Walbro GSS342\/AEM 50-1200","offer_id":67764993098030,"sku":"20-0740-00","price":1380.99,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Ti Automotive E5LM","offer_id":67764993130798,"sku":"20-0741-00","price":1432.99,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Walbro F90000267\/274\/285","offer_id":67764993163566,"sku":"20-0742-00","price":1432.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0740_ea9a7a51-0a47-4c23-90c6-28f3290e0987.jpg?v=1792383588"},{"product_id":"radium-sae-double-banjo-press-in-valve-cover-fitting-nissan-skyline-gt-r-r32-r33-r34-rb26dett","title":"Radium SAE Double Banjo Press-In Valve Cover Fitting, Nissan Skyline GT-R R32 \/ R33 \/ R34 (RB26DETT)","description":"\u003ch2\u003eRadium Double SAE Press-In Valve Cover Fitting, Nissan RB26DETT\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan RB26DETT (Skyline GT-R R32 \/ R33 \/ R34), intake or exhaust valve cover\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0739\u003c\/p\u003e\u003cp\u003eA double-ended 16mm SAE quick connect swivel that presses into either RB26DETT cam cover in place of the factory fitting. It's ideal for balancing the intake and exhaust cover vents, and takes Radium's 14-0627 and 14-0628 SAE hose ends. No drilling or welding is needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-16mm-sae-female-to-90-5-8in-barb-fitting\"\u003eRadium 16mm SAE Female to 90° 5\/8\" Barb (14-0627)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-16mm-sae-female-to-45-5-8-barb-fitting\"\u003eRadium 16mm SAE Female to 45° 5\/8\" Barb (14-0628)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-12an-male-press-in-valve-cover-fittings-nissan-rb26dett\"\u003eRadium 12AN Press-In Valve Cover Fitting, Nissan RB26DETT (20-0809)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne fitting per cover. Order 2 to replace both\u003c\/li\u003e\n\u003cli\u003eSAE hose ends sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNissan Skyline GT-R R32 \/ R33 \/ R34 RB26DETT (intake or exhaust cover)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764993458478,"sku":"20-0739","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0739.jpg?v=1792383589"},{"product_id":"radium-dual-fluid-lock-catch-can-kit-nissan-350z-z33-skyline-v35-infiniti-g35","title":"Radium Dual Fluid Lock Catch Can Kit, Nissan 350Z Z33 \/ Skyline V35 \/ Infiniti G35","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Nissan 350Z \/ Skyline V35 \/ Infiniti G35\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Skyline V35 and Infiniti G35 (Radium's listed fitment), Nissan 350Z Z33 (confirm with us)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0729-FL\u003c\/p\u003e\u003cp\u003eThis kit puts a PCV can and a CCV can together on one Nissan-specific bracket at the front left of the engine bay. The PCV can catches the vapour and sludge drawn into the manifold at idle, cruise and on decel. The CCV can catches the heavier crankcase flow under full throttle, between the crankcase vent and the intake pipe.\u003c\/p\u003e\u003cp\u003eBoth cans are pressure sealed, so no extra check valve is needed. Both use Radium's patented 207ml Fluid Lock design, which can't overfill.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-pcv-fluid-lock-catch-can-kit-nissan-350z-z33-skyline-v35-infiniti-g35-v35-vq35de\"\u003eRadium Fluid Lock PCV Catch Can Kit, 350Z \/ V35 VQ35DE (20-0728-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoesn't work with the factory Nissan airbox, so an aftermarket intake is needed\u003c\/li\u003e\n\u003cli\u003eRadium's compatibility list only names the V35 Skyline and G35 (excluding VQ35HR), but its install instructions also cover the 350Z and VQ35HR. Email us to confirm before ordering, especially for a Z33 or VQ35HR\u003c\/li\u003e\n\u003cli\u003eRadium's instructions say some RHD VQ35HR engines need the bonnet switch dealt with, and some LHD VQ35HR engines need two earth points moved\u003c\/li\u003e\n\u003cli\u003eA throttle re-learn may be needed after fitting\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks from 3–4 weeks. The PCV can usually collects more than the CCV can\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, overfilled oil, poor breather baffling or a PCV valve leaking under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan Skyline (V35)\u003c\/li\u003e\n\u003cli\u003eInfiniti G35 (V35)\u003c\/li\u003e\n\u003cli\u003eNissan 350Z \/ Fairlady Z (Z33): covered in Radium's install instructions but not on its compatibility list. Confirm with us\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764993491246,"sku":"20-0729-FL","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0729-FL_de06082e-ee96-4815-9a09-70db6d7510ac.jpg?v=1792383589"},{"product_id":"radium-fuel-hanger-plumbing-kit-w-filter-nissan-silvia-s13-180sx-s13-skyline-r32","title":"Radium Fuel Hanger Plumbing Kit w\/Filter - Nissan Silvia S13 \/ 180SX S13 \/ Skyline R32","description":"\u003ch2\u003eRadium Fuel Hanger Plumbing Kit with Filter, Nissan S13 \/ 180SX \/ R32\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S13 Silvia, 180SX, 200SX and R32 Skyline (RHD and LHD) with the Radium early Nissan hanger, or R32 GT-R with the Radium R32 GT-R FHST\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0703-03 (10 micron stainless), 20-0703-05 (6 micron microglass)\u003c\/p\u003e\u003cp\u003eEverything between a Radium early Nissan hanger (or R32 GT-R FHST) and an aftermarket rail and regulator. It's ideal for SR20, CA18 and RB20\/RB26 builds. An 8AN feed runs from the hanger through a Radium filter in the stock location to a 90° PushLok end for your rail. A 6AN return comes back from the regulator. Both lines run in billet retainers and clear the OEM pump cover with no cutting. Either line can be modified to add an inline flex fuel sensor.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-nissan-180-sx-silvia-s13-skyline-r32-gts-gts-t\"\u003eRadium Fuel Pump Hanger, S13 \/ 180SX \/ R32 GTS-T (20-0730-00 \/ 20-0732-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-surge-tank-fhst-nissan-skyline-r32-gt-r\"\u003eRadium FHST, Skyline R32 GT-R (20-0740 \/ 20-0741 \/ 20-0742)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-brake-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34\"\u003eRadium Fuel and Brake Line Retainer Kit, Nissan (20-0626)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot designed for the stock fuel rail\u003c\/li\u003e\n\u003cli\u003eAftermarket rail, FPR and their 8AN \/ 6AN male fittings not included\u003c\/li\u003e\n\u003cli\u003eThe early Nissan hanger doesn't suit the R32 GT-R. Use the Radium R32 GT-R FHST with this kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan S13 Silvia \/ 180SX \/ 200SX \/ 240SX (RHD and LHD), with Radium early Nissan hanger\u003c\/li\u003e\n\u003cli\u003eNissan R32 Skyline excl. GT-R (RHD and LHD), with Radium early Nissan hanger\u003c\/li\u003e\n\u003cli\u003eNissan R32 Skyline GT-R, with Radium R32 GT-R FHST\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Stainless - 10 Micron \/ Nissan","offer_id":67764993851694,"sku":"20-0703-03","price":960.99,"currency_code":"AUD","in_stock":true},{"title":"Microglass - 6 Micron \/ Nissan","offer_id":67764993884462,"sku":"20-0703-05","price":925.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0703.jpg?v=1792383591"},{"product_id":"radium-fuel-hanger-surge-tank-add-on-nissan-200sx-s14-s15-skyline-r33-r34","title":"Radium Fuel Hanger Surge Tank Add-On - Nissan 200SX S14, S15\/Skyline R33, R34","description":"\u003ch2\u003eRadium Fuel Hanger Surge Tank Add-On – Nissan Silvia S14 \/ S15, Skyline R33 \/ R34\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia \/ 200SX S14 and S15, Skyline R33 and R34 (all models, RHD and LHD) with the Radium late Nissan fuel pump hanger\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0700 (Walbro GSS342 \/ AEM 50-1200 style), 20-0701 (Walbro F900-series \/ Ti E5LM)\u003c\/p\u003e\n\u003cp\u003eThe saddle tank in these Nissans has very little baffling, so fuel sloshes away from the pickup under hard driving, pressure wobbles and the engine goes lean. That's a real risk in drift and time attack. This add-on bolts a full surge tank inside the factory tank, plugging into the Radium late Nissan hanger with no grinding, bending or vehicle modification.\u003c\/p\u003e\n\u003cp\u003eThe surge tank holds one or two pumps, including brushless. It's kept full from four sources: the pump in the factory location (now a high-flow lift pump), regulator return fuel, the jet pump siphon and a 355 lph one-way fill valve. Radium recommends feeding it from a single-pump hanger, giving two or three pumps in the tank in total.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fuel-pump-hanger-nissan-200sx-s14-s15-skyline-r33-r34\"\u003eRadium Fuel Pump Hanger – S14 \/ S15 \/ R33 \/ R34 (20-0630)\u003c\/a\u003e – required\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-s14-s15-silvia-r33-r34-skyline\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – S14 \/ S15 \/ R33 \/ R34 (20-0702)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – for a second surge pump\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-pump-outlet-adapter-check-valve-with-10mm-barb\"\u003eRadium Pump Outlet Adapter with Check Valve (20-0798)\u003c\/a\u003e – for an F90000295 or E5LM lift pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a Radium late Nissan hanger: 20-0630-00 with 20-0700, or 20-0632-00 with 20-0701. Not included.\u003c\/li\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eWiring for one surge pump is included. A second surge pump needs its own fuse and relay (17-0031). The lift pump runs on the OEM pump wiring.\u003c\/li\u003e\n\u003cli\u003ePumps without an internal check valve (AEM 50-1230 \/ 50-1235) need \u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003e20-1533\u003c\/a\u003e, one per pump. Some 20-0701 pumps need \u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003e20-1534\u003c\/a\u003e (not in the lift pump position).\u003c\/li\u003e\n\u003cli\u003eIf you use an F90000295 or E5LM as the lift pump, fit 20-0798 so the surge tank doesn't drain back and cause long cranking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S14 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S15 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R33 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R34 – all models, RHD and LHD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Nissan \/ Walbro GSS342\/AEM 50-1200","offer_id":67764993917230,"sku":"20-0700","price":698.99,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Walbro F90000267\/274\/285\/295\/E5LM","offer_id":67764993949998,"sku":"20-0701","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-070_7b7c8da1-9619-4138-a43c-728eb3d9a869.jpg?v=1792383592"},{"product_id":"radium-engineering-pcv-fluid-lock-catch-can-kit-nissan-350z-z33-skyline-v35-infiniti-g35-v35-vq35de","title":"Radium Engineering PCV Fluid Lock Catch Can Kit - Nissan 350Z Z33 \/ Skyline V35 \/ Infiniti G35 V35 (VQ35DE)","description":"\u003ch2\u003eRadium Fluid Lock PCV Catch Can Kit, Nissan 350Z \/ Skyline V35 (VQ35DE)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan 350Z \/ Fairlady Z (Z33), Skyline V35, Infiniti G35, VQ35DE only\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0728-FL\u003c\/p\u003e\u003cp\u003eAt idle, cruise and on decel, the VQ35DE's PCV system draws crankcase vapour, unburnt fuel and oil sludge into the intake manifold. Over time that builds up on the throttle body and intake. This kit puts a Fluid Lock can inline between the PCV valve and the intake to trap it first.\u003c\/p\u003e\u003cp\u003eIt mounts on the factory power steering reservoir bracket with no drilling. The can is pressure sealed, so it can connect straight to the manifold with no extra check valve, which suits supercharged and turbo builds too. The patented Fluid Lock design stops the 207ml can overfilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-catch-can-kit-nissan-350z-z33-skyline-v35-infiniti-g35\"\u003eRadium Dual Fluid Lock Catch Can Kit, 350Z \/ V35 (20-0729-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fhst-fuel-hanger-surge-tank-350z-g35\"\u003eRadium Fuel Hanger Surge Tank, 350Z \/ V35\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoesn't fit the VQ35HR, which has a different power steering reservoir mount\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick from 3–4 weeks. PCV cans usually collect more than CCV cans\u003c\/li\u003e\n\u003cli\u003eEmpty by unscrewing the lower reservoir, or fit the petcock drain kit where there's room\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, overfilled oil, poor breather baffling or a PCV valve leaking under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 350Z (Z33), VQ35DE only\u003c\/li\u003e\n\u003cli\u003eNissan Skyline (V35), VQ35DE only\u003c\/li\u003e\n\u003cli\u003eNissan Fairlady Z (Z33), VQ35DE only\u003c\/li\u003e\n\u003cli\u003eInfiniti G35 (V35), VQ35DE only\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764993982766,"sku":"20-0728-FL","price":366.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0728-FL_d1bf7373-9a27-4f26-84c6-c37b13530d5f.jpg?v=1792383592"},{"product_id":"radium-ccv-fluid-lock-catch-can-kit-nissan-silvia-180sx-s13","title":"Radium CCV Fluid Lock Catch Can Kit - Nissan Silvia\/180SX S13","description":"\u003ch2\u003eRadium Fluid Lock CCV Catch Can Kit, Nissan S13 180SX \/ Silvia\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan S13 180SX, Silvia, 200SX and 240SX, RHD and LHD (excluding CA18DET)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0726-FL\u003c\/p\u003e\u003cp\u003eUnder full boost the S13's crankcase vent sends oil and sludge into the intake pipe, intercooler and air filter. This kit catches it with a Fluid Lock can inline between the valve cover vent and the intake pipe. It connects to the factory valve cover barb with the supplied hose.\u003c\/p\u003e\u003cp\u003eThe can mounts to two holes on the left-hand side near the firewall, positioned to clear the wiper motor on RHD cars and the master cylinders on LHD cars. No drilling needed. SR20DET owners can add the optional press-fit fitting and 10AN hose ends for a neater setup.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-kit-pcv-nissan-s13-fluid-lock\"\u003eRadium PCV Fluid Lock Catch Can Kit, S13 (20-0725-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fluid-lock-dual-catch-can-kit-nissan-s13\"\u003eRadium Dual Fluid Lock Catch Can Kit, S13 (20-0727-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-10an-male-press-fit-fitting-nissan-s13-sr20det-exhaust\"\u003eRadium 10AN Male Press-Fit Fitting, S13 SR20DET (20-0811)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0215-pushlok-hose-end-10an-180\"\u003eRadium PushLok Hose End, 10AN 180° (14-0215)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0211-pushlok-hose-end-10an-straight\"\u003eRadium PushLok Hose End, 10AN Straight (14-0211)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoesn't fit CA18DET-powered S13s\u003c\/li\u003e\n\u003cli\u003eCovers the CCV side only. Radium recommends pairing it with the PCV kit (20-0725-FL)\u003c\/li\u003e\n\u003cli\u003eSR20DET only: optional add-ons 20-0811, 14-0215 and 14-0211 are sold separately\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick from 3–4 weeks\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, overfilled oil, poor breather baffling or a PCV valve leaking under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan S13 180SX, all models, RHD and LHD (excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 Silvia, all models, RHD and LHD (excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 200SX, all models, RHD and LHD (excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 240SX, all models, RHD and LHD\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764994015534,"sku":"20-0726-FL","price":419.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0726-FL.jpg?v=1792383592"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/collections\/1_7dce170d-4aa4-4e3d-8279-030e0c1e3d27.png?v=1783482062","url":"https:\/\/radiumengineering.com.au\/collections\/shop-by-nissan.oembed","provider":"Radium Engineering Australia","version":"1.0","type":"link"}