{"title":"Shop by Ford","description":"\u003cp\u003eBrowse our selection of performance parts and accessories for Ford vehicles.\u003c\/p\u003e","products":[{"product_id":"radium-m10x1mm-female-to-1-8npt-male-fitting-ford-mustang-gt-fn-18-21","title":"Radium M10x1mm Female to 1\/8NPT Male Fitting - Ford Mustang GT FN 18-21","description":"\u003ch2\u003eRadium M10 x 1.0 Female to 1\/8\" NPT Male, Ford Mustang GT 2018–2021 \/ Bosch PST-F1\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT 2018+ OEM fuel rail sensor, and Bosch PST-F1 sensor installs\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0359\u003c\/p\u003e\u003cp\u003eConverts an M10 x 1.0 female port to 1\/8\" NPT male. It's commonly used to fit a Bosch PST-F1 pressure\/temperature sensor into a 1\/8\" NPT port, and it also suits the 2018+ Mustang GT factory rail sensor. With Radium's 20-1433 Coyote rails, you'll need it for the OEM sensor unless you buy the 20-1433-PK kit.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rails-ford-coyote-voodoo\"\u003eRadium Fuel Rails, Ford Coyote \/ Voodoo (20-1433)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-ford-coyote-voodoo\"\u003eRadium Fuel Rail Plumbing Kit, Ford Coyote \/ Voodoo (20-1433-PK)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-3-8in-sae-male-to-1-8npt-male-ford-mustang-gt-fn-18-21\"\u003eRadium 3\/8\" SAE Male to 1\/8\" NPT Male, Ford Mustang GT 2018–2021 (14-0358)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSensor not included\u003c\/li\u003e\n\u003cli\u003eNPT threads seal on the taper. Use a small amount of PTFE paste or tape\u003c\/li\u003e\n\u003cli\u003eTighten finger tight, then a further 1.5 to 3 turns\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang GT 2018+ (OEM fuel rail sensor)\u003c\/li\u003e\n\u003cli\u003eUniversal, Bosch PST-F1 sensor into a 1\/8\" NPT port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764920254766,"sku":"14-0359","price":26.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0359.jpg?v=1792383210"},{"product_id":"radium-coolant-expansion-tank-kit-ford-focus-st-lw-lz-11-18-focus-rs-lz-16-17","title":"Radium Coolant Expansion Tank Kit - Ford Focus ST LW\/LZ 11-18\/Focus RS LZ 16-17","description":"\u003ch2\u003eRadium Coolant Expansion Tank Kit, Ford Focus ST \/ RS\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus ST 2013–2018 and Focus RS 2016–2018 (EcoBoost)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0318\u003c\/p\u003e\u003cp\u003eReplaces the plastic coolant tank at the front right of the Focus ST and RS engine bay. It does the same job as the factory tank but holds about 160mL more, and it fits with no permanent modifications. The tank is two CNC-machined aluminium halves bolted together, with two chambers linked top and bottom and an internal swirl feature to help de-aerate the cooling system. Everything needed to fit it is in the kit, apart from the cap.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-pcv-baffle-plate-oem-configuration-ford-ecoboost-focus-mustang-mazda-mzr-3-mps-6-mps\"\u003eRadium PCV Baffle Plate, OEM Configuration, Focus ST \/ RS (20-0327-01)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-catch-can-kit-15-18-ford-focus-st-fluid-lock\"\u003eRadium Dual Catch Can Kit, Ford Focus ST, Fluid Lock (20-0358-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA pressure cap is required and sold separately. The OEM Ford cap can't be reused\u003c\/li\u003e\n\u003cli\u003eRadium recommends its stainless cap with 21.8 psi relief, which raises the coolant boiling point for hard track use. Email us for availability\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Focus ST 2013–2018\u003c\/li\u003e\n\u003cli\u003eFord Focus RS 2016–2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764928839982,"sku":"20-0318","price":611.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0318_4be265a5-dfc4-4238-a488-84302fcf3618.jpg?v=1792383273"},{"product_id":"radium-fuel-hanger-fpr-block-off-plate-ford-mustang-s197-s550-11","title":"Radium Fuel Hanger FPR Block Off Plate - Ford Mustang S197\/S550 11+","description":"\u003ch2\u003eRadium Fuel Hanger FPR Block-Off Kit – Ford Mustang 2011+\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium 2011+ Ford Mustang \/ Shelby fuel pump hangers (20-1800, 20-1801, 20-1802)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0806\u003c\/p\u003e\n\u003cp\u003eThe Radium Mustang hanger ships as a returnless (dead-head) system with a built-in regulator. This kit blocks that regulator off and turns the hanger into a return-style system, so you can run an external regulator and send the return back to the tank through the port on the hanger top plate.\u003c\/p\u003e\n\u003cp\u003eIt's the way to go once a Coyote build moves past what the built-in regulator handles, or when you want to tune base pressure on E85.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger – 2011+ Ford Mustang \/ Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dmr-ra-direct-mount-fuel-pressure-regulator\"\u003eRadium DMR-RA Direct Mount Fuel Pressure Regulator (20-1623)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYou'll need a 6AN ORB fitting (sold separately) on the return port. If you're keeping the rear seat, it has to be low profile.\u003c\/li\u003e\n\u003cli\u003eAn external fuel pressure regulator (not included) must be fitted downstream. That part isn't covered in the instructions.\u003c\/li\u003e\n\u003cli\u003eThis kit is already included in the Radium Mustang fuel hanger plumbing kits (20-1816 and 20-1817).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Mustang \/ Shelby 2011+ (S197, S550, S650) with Radium hanger 20-1800, 20-1801 or 20-1802\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764930445614,"sku":"20-0806","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0806.jpg?v=1792383275"},{"product_id":"radium-pcv-baffle-plate-oem-configuration-ford-ecoboost-focus-mustang-mazda-mzr-3-mps-6-mps","title":"Radium PCV Baffle Plate OEM Configuration - Ford Ecoboost Focus\/Mustang\/Mazda MZR 3 MPS\/6 MPS","description":"\u003ch2\u003eRadium PCV Baffle Plate, OEM Configuration, Ford Focus ST \/ RS\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus ST 2013–2018 and Focus RS 2016–2018 (EcoBoost)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0327-01\u003c\/p\u003e\u003cp\u003eReplaces the factory plastic PCV plate and valve on the block. The CNC-machined aluminium plate adds an extra baffle to keep oil sludge out of the intake without restricting airflow, and has two 10AN ORB ports above the baffles. The factory Ford PCV valve leaks at all boost levels, so this kit includes Radium's upgraded 10AN ORB PCV valve plus the plug, hose and clamps. It fits with no permanent modifications, and with Radium's Focus ST \/ RS catch can kits it needs no other parts or check valve.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-catch-can-kit-15-18-ford-focus-st-fluid-lock\"\u003eRadium Dual Catch Can Kit, Ford Focus ST, Fluid Lock (20-0358-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-catch-can-kit-ford-focus-rs-lz-16-17\"\u003eRadium Dual Fluid Lock Catch Can Kit, Ford Focus RS (20-0328-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-pcv-baffle-plate-ford-focus-st-rs-mustang-ecoboost-mazda-mps\"\u003eRadium PCV Baffle Plate, Baffle Only (20-0327-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFocus ST \/ RS only. Mustang EcoBoost, Fusion, Duratec and Mazda MZR engines need the baffle-only 20-0327-02\u003c\/li\u003e\n\u003cli\u003eOther brands of catch can kit may need some customising\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Focus ST 2013–2018\u003c\/li\u003e\n\u003cli\u003eFord Focus RS 2016–2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764931232046,"sku":"20-0327-01","price":261.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0327-01_06db5f2a-05b4-4ab4-b8f3-e8b0b314dafb.jpg?v=1792383282"},{"product_id":"radium-sound-symposer-delete-kit-ford-focus-st-lw-lz-11-18","title":"Radium Sound Symposer Delete kit - Ford Focus ST LW\/LZ 11-18","description":"\u003ch2\u003eRadium Sound Symposer Delete Kit, Ford Focus ST\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus ST 2013+\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0356\u003c\/p\u003e\u003cp\u003eThe factory sound symposer pipes induction noise into the cabin and serves no purpose once the engine is modified. This billet plate replaces it, freeing up engine bay space. It goes on in minutes with a couple of spanners, with no cutting or drilling, and reuses the factory Ford gasket. The machined 1\/8\" NPT port can be plugged or used as a vacuum reference for other components, and both fittings are supplied.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-pcv-baffle-plate-oem-configuration-ford-ecoboost-focus-mustang-mazda-mzr-3-mps-6-mps\"\u003eRadium PCV Baffle Plate, OEM Configuration, Focus ST \/ RS (20-0327-01)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReuses the OEM Ford gasket\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Focus ST 2013+\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764931559726,"sku":"20-0356","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0356_0099ebd6-b19e-46b4-b46d-902742b25164.jpg?v=1792383283"},{"product_id":"radium-3-8in-sae-male-to-1-8npt-male-ford-mustang-gt-fn-18-21","title":"Radium 3\/8in SAE Male to 1\/8NPT Male - Ford Mustang GT FN 18-21","description":"\u003ch2\u003eRadium 3\/8\" SAE Male to 1\/8\" NPT Male, Ford Mustang GT 2018–2021\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT 2018+ 5.0 Coyote (direct injection) with Radium 20-1433 fuel rails\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0358\u003c\/p\u003e\u003cp\u003eWhen fitting Radium's Coyote rails to a direct-injected 2018+ Mustang GT, this adapter connects the OEM DI pump feed hose to the rail. It converts a 3\/8\" SAE quick connect male to 1\/8\" NPT male. You don't need it if you buy the 20-1433-PK plumbing kit, which includes its own feed adapter.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rails-ford-coyote-voodoo\"\u003eRadium Fuel Rails, Ford Coyote \/ Voodoo (20-1433)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-ford-coyote-voodoo\"\u003eRadium Fuel Rail Plumbing Kit, Ford Coyote \/ Voodoo (20-1433-PK)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-m10x1mm-female-to-1-8npt-male-fitting-ford-mustang-gt-fn-18-21\"\u003eRadium M10 x 1.0 Female to 1\/8\" NPT Male, Ford Mustang GT 2018–2021 \/ Bosch PST-F1 (14-0359)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot needed with the 20-1433-PK plumbing kit\u003c\/li\u003e\n\u003cli\u003eNPT threads seal on the taper. Use a small amount of PTFE paste or tape\u003c\/li\u003e\n\u003cli\u003eTighten finger tight, then a further 1.5 to 3 turns\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Mustang GT 2018+ 5.0 Coyote (DI) with Radium 20-1433 rails\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764938932526,"sku":"14-0358","price":26.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0358.jpg?v=1792383337"},{"product_id":"radium-coolant-expansion-tank-kit-ford-mustang-gt-s550-fm-fn-15-22","title":"Radium Coolant Expansion Tank Kit - Ford Mustang GT S550 FM\/FN 15-22","description":"\u003ch2\u003eRadium Coolant Expansion Tank Kit, Ford Mustang S550\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang S550 2015–2023 (GT, EcoBoost and V6), Shelby GT350 and GT500\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0286\u003c\/p\u003e\u003cp\u003eReplaces the plastic coolant tank at the front of the S550 engine bay with a CNC-machined billet aluminium header tank, made in two halves bolted together. Its low profile frees up room for a supercharger or turbo kit. Inside, two chambers are linked top and bottom, and an internal swirl feature helps de-aerate the cooling system. The kit has everything needed to fit it, apart from the cap, with no permanent modifications.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-radiator-cap-type-a-black\"\u003eRadium Radiator Cap, Type A, Black (18-0076-A15)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe OEM cap can't be reused. A Radium cap is required and sold separately\u003c\/li\u003e\n\u003cli\u003eThe factory S550, GT350 and GT500 cap is rated at 1.45 bar (21 psi)\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang S550 2015–2023 (GT, EcoBoost and V6)\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT350 (S550)\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT500 (S550)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764953219374,"sku":"20-0286","price":541.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0286.jpg?v=1792383398"},{"product_id":"radium-coolant-expansion-tank-kit-ford-shelby-gt500-s197-13-14","title":"Radium Coolant Expansion Tank Kit - Ford Shelby GT500 S197 13-14","description":"\u003ch2\u003eRadium Coolant Expansion Tank Kit, Ford Shelby GT500 S197 2013–2014\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Shelby GT500 S197, 2013–2014\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0293\u003c\/p\u003e\u003cp\u003eReplaces the plastic coolant tank at the front of the GT500 engine bay with a CNC-machined billet aluminium header tank, made in two halves bolted together. Its low profile frees up room for forced induction or other changes. Inside, two chambers are linked top and bottom, and an internal swirl feature helps de-aerate the cooling system. The kit has everything needed to fit it, apart from the cap, with no permanent modifications.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-radiator-cap-type-a-black\"\u003eRadium Radiator Cap, Type A, Black (18-0076-A11)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-coolant-expansion-tank-kit-ford-mustang-gt-s197-11-14\"\u003eRadium Coolant Expansion Tank Kit, Ford Mustang S197 2011–2014 (20-0285)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe OEM cap can't be reused. A Radium cap is required and sold separately\u003c\/li\u003e\n\u003cli\u003eThe factory S197 GT500 cap is rated at 1.1 bar (16 psi)\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Shelby GT500 S197, 2013–2014\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764953284910,"sku":"20-0293","price":541.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0293.jpg?v=1792383398"},{"product_id":"radium-coolant-expansion-tank-kit-ford-mustang-gt-s197-11-14","title":"Radium Coolant Expansion Tank Kit - Ford Mustang GT S197 11-14","description":"\u003ch2\u003eRadium Coolant Expansion Tank Kit, Ford Mustang S197 2011–2014\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang S197, 2011–2014\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0285\u003c\/p\u003e\u003cp\u003eReplaces the plastic coolant tank at the front of the 2011–2014 Mustang engine bay with a CNC-machined billet aluminium header tank, made in two halves bolted together. Its low profile frees up room for forced induction or other changes. Inside, two chambers are linked top and bottom, and an internal swirl feature helps de-aerate the cooling system. The kit includes the bracket, fittings and hoses, with no permanent modifications.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-radiator-cap-type-a-black\"\u003eRadium Radiator Cap, Type A, Black (18-0076-A11)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe OEM cap can't be reused. A Radium cap is required and sold separately\u003c\/li\u003e\n\u003cli\u003eThe factory S197 cap is rated at 1.1 bar (16 psi)\u003c\/li\u003e\n\u003cli\u003eNot for the 2013–2014 Shelby GT500 (20-0293) or the 2015+ S550 (20-0286)\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Mustang S197, 2011–2014\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764953383214,"sku":"20-0285","price":541.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0285.jpg?v=1792383399"},{"product_id":"radium-fluid-lock-pcv-catch-can-kit-ford-focus-st-lw-lz-11-18-focus-rs-lz-16-17","title":"Radium Fluid Lock PCV Catch Can Kit - Ford Focus ST LW\/LZ 11-18\/Focus RS LZ 16-17","description":"\u003ch2\u003eRadium Fluid Lock PCV Catch Can Kit, Ford Focus ST \/ RS (EcoBoost)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus ST LW\/LZ (2013–2018) and Focus RS LZ (2016–2018), EcoBoost\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0315-FL\u003c\/p\u003e\u003cp\u003eAfter a hard run, the EcoBoost's PCV hose pulls crankcase vapour and oil sludge into the intake manifold at idle, cruise and on decel. This kit puts a Fluid Lock can inline with the PCV valve to catch it, keeping the factory PCV function. The can is pressure sealed, so it can connect to the manifold under boost.\u003c\/p\u003e\u003cp\u003eIt mounts on the front left core support near the radiator with no drilling. On the ST, you'll need a sound symposer delete for clearance.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-sound-symposer-delete-kit-ford-focus-st-lw-lz-11-18\"\u003eRadium Sound Symposer Delete Kit, Focus ST (20-0356)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ccv-fluid-lock-catch-can-kit-ford-focus-rs-mk3-lz-16-17\"\u003eRadium CCV Fluid Lock Catch Can Kit, Focus RS (20-0316-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fluid-lock-crankcase-catch-can-kit-ford-focus-st-lz-2015-2018\"\u003eRadium CCV Fluid Lock Catch Can Kit, Focus ST (20-0357-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFocus ST installs need the 20-0356 sound symposer delete kit (or another symposer delete) for clearance\u003c\/li\u003e\n\u003cli\u003eCovers the PCV side only. Dual kits are 20-0328-FL (RS) and 20-0358-FL (ST)\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick from 3–4 weeks. PCV cans usually collect more than CCV cans\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by or an overfilled oil level\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Focus ST EcoBoost (2013–2018)\u003c\/li\u003e\n\u003cli\u003eFord Focus RS EcoBoost (2016–2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764953743662,"sku":"20-0315-FL","price":436.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0315-FL_530ec3bd-cfbc-4995-a41f-aacb4937ed19.jpg?v=1792383401"},{"product_id":"radium-pcv-fluid-lock-catch-can-kit-ford-fiesta-st-13-18","title":"Radium PCV Fluid Lock Catch Can Kit - Ford Fiesta ST 13-18","description":"\u003ch2\u003eRadium Fluid Lock PCV Catch Can Kit, Ford Fiesta ST\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Fiesta ST (2014–2019), 1.6L EcoBoost\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0377-FL\u003c\/p\u003e\u003cp\u003eThe Fiesta ST's PCV valve closes under boost, but at idle, cruise and on decel it pulls crankcase vapour into the intake manifold. This kit puts a Fluid Lock can inline with the PCV valve to catch it, keeping the factory function. The can is pressure sealed, so it connects straight to the manifold.\u003c\/p\u003e\u003cp\u003eIt mounts to the front right engine mount and tucks in under the factory engine cover, with no modification. Radium recommends pairing it with the crankcase kit, or the dual kit, for full protection.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fluid-lock-crankcase-catch-can-kit-ford-fiesta-st-13-18\"\u003eRadium Crankcase Fluid Lock Catch Can Kit, Fiesta ST (20-0378-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-catch-can-kit-ford-fiesta-st-13-18\"\u003eRadium Dual Fluid Lock Catch Can Kit, Fiesta ST (20-0379-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCovers the PCV side only. The crankcase vent side is 20-0378-FL, or buy both as 20-0379-FL\u003c\/li\u003e\n\u003cli\u003eThere's no set emptying interval. Check the dipstick from 3–4 weeks. PCV systems usually collect more than CCV systems\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, an overfilled crankcase, poor breather placement or a PCV valve that doesn't close under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Fiesta ST (2014–2019)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764962754862,"sku":"20-0377-FL","price":384.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0377-FL.jpg?v=1792383459"},{"product_id":"radium-fluid-lock-crankcase-catch-can-kit-ford-focus-st-lz-2015-2018","title":"Radium Fluid Lock Crankcase Catch Can Kit - Ford Focus ST LZ 2015-2018","description":"\u003ch2\u003eRadium Fluid Lock CCV Catch Can Kit, Ford Focus ST LZ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus ST LZ (2015–2018), EcoBoost\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0357-FL\u003c\/p\u003e\u003cp\u003eAt full throttle, the ST's crankcase breather sends oil and sludge into the intake pipe and intercooler, which cuts intercooler efficiency. This kit puts a Fluid Lock can inline with the breather port to catch it.\u003c\/p\u003e\u003cp\u003eIt mounts at the back left of the engine bay with no drilling. The patented Fluid Lock design stops the 207ml can overfilling. Pair it with the PCV kit for full coverage, or get the dual kit.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fluid-lock-pcv-catch-can-kit-ford-focus-st-lw-lz-11-18-focus-rs-lz-16-17\"\u003eRadium PCV Fluid Lock Catch Can Kit, Focus ST \/ RS (20-0315-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-catch-can-kit-15-18-ford-focus-st-fluid-lock\"\u003eRadium Dual Fluid Lock Catch Can Kit, Focus ST (20-0358-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-sound-symposer-delete-kit-ford-focus-st-lw-lz-11-18\"\u003eRadium Sound Symposer Delete Kit, Focus ST (20-0356)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCovers the CCV side only. The 20-0358-FL dual kit combines both sides for the ST\u003c\/li\u003e\n\u003cli\u003eThe matching PCV kit needs the 20-0356 sound symposer delete on the ST\u003c\/li\u003e\n\u003cli\u003eThe Focus RS uses the 20-0316-FL CCV kit\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick from 3–4 weeks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Focus ST EcoBoost (2015–2018)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764962722094,"sku":"20-0357-FL","price":419.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0357-FL.jpg?v=1792383459"},{"product_id":"radium-fuel-rail-plumbing-kit-ford-mustang-gt-s197","title":"Radium Fuel Rail Plumbing Kit - Ford Shelby GT500 S197","description":"\u003ch2\u003eRadium Fuel Rail Plumbing Kit, Ford Shelby GT500 S197\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Shelby GT500 S197 2007–2014 with Radium 20-0320 fuel rails\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0334-11\u003c\/p\u003e\u003cp\u003eTakes fuel from the OEM hard line near the firewall and feeds both Radium GT500 rails in parallel through a 6AN Y-adapter. All hoses are E85-safe PTFE, and billet O-ring plugs are supplied for the unused rail ports. It's a clean, bolt-on way to finish the rail upgrade on a blown 5.4.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-ford-shelby-gt500-s197-2007-2014\"\u003eRadium Fuel Rail Kit, Shelby GT500 S197 (20-0320)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRequires Radium 20-0320 rails (sold separately)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Shelby GT500 S197 2007–2014\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764962787630,"sku":"20-0334-11","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0334-11.jpg?v=1792383459"},{"product_id":"radium-fuel-surge-tank-install-kit-ford-focus-st-lw-lz-13-18-ford-focus-rs-lz-16-17","title":"Radium Fuel Surge Tank Install Kit - Ford Focus ST LW\/LZ 13-18\/Ford Focus RS LZ 16-17","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Ford Focus ST \/ RS MK3\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus ST LW\/LZ (2013–2018) and Focus RS LZ (2016–2017), 2.0L and 2.3L EcoBoost\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0365\u003c\/p\u003e\n\u003cp\u003eTuned MK3 Focus STs and RSs are known to starve for fuel under hard cornering on a low tank, and a direct-injected EcoBoost doesn't take kindly to it. This kit adds a Radium FST-R regulated surge tank. The surge tank pump takes over the OEM feed and supplies the factory high-pressure pump, while the OEM low-pressure pump is redirected to keep the surge tank full. Overflow goes back to the tank through a billet adapter in the filler hose.\u003c\/p\u003e\n\u003cp\u003eThe surge tank mounts under the car in a collision-safe spot in front of the rear bumper support, with heat tape to protect it from the exhaust. The FST-R's regulator can run vacuum referenced (1:1) or static, and the solder-free wiring takes under 30 minutes. A good fit for track day, time attack and E85 Focus builds.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fstr-ra-fuel-surge-tank-w-integrated-fpr-fuel-pressure-regulator\"\u003eRadium FST-R RA Fuel Surge Tank with Integrated Regulator (20-1933)\u003c\/a\u003e – required\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fuel-pressure-gauge-w-6an-inline-adapter\"\u003eRadium Fuel Pressure Gauge with 6AN Inline Adapter (20-0152)\u003c\/a\u003e – for setting surge tank pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe FST-R surge tank and surge tank pump are sold separately.\u003c\/li\u003e\n\u003cli\u003eYou'll need a way to set FST-R pressure, either with tuning software that reads it (such as a COBB Accessport) or the 20-0152 gauge on the FST-R outlet.\u003c\/li\u003e\n\u003cli\u003eYou may need a main tank pump upgrade. As a guide, the main tank pump should flow about 40–50% of the surge tank pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus ST LW\/LZ (2013–2018)\u003c\/li\u003e\n\u003cli\u003eFord Focus RS LZ (2016–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764962984238,"sku":"20-0365","price":668.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0365.jpg?v=1792383459"},{"product_id":"radium-dual-fluid-lock-catch-can-kit-ford-focus-rs-lz-16-17","title":"Radium Dual Fluid Lock Catch Can Kit - Ford Focus RS LZ 16-17","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Ford Focus RS LZ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus RS LZ (2016–2018), EcoBoost\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0328-FL\u003c\/p\u003e\u003cp\u003eThis kit covers both breather circuits on the Focus RS: the PCV kit (20-0315-FL) and CCV kit (20-0316-FL) in one box. The PCV can catches what gets pulled into the manifold at idle and cruise. The CCV can catches the oil pushed into the intake pipe and intercooler at full throttle.\u003c\/p\u003e\u003cp\u003eThe PCV can mounts on the front left core support near the radiator, and the CCV can mounts at the back left of the engine bay. Both bolt in with no drilling and use the patented Fluid Lock design.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe Focus ST uses the 20-0358-FL dual kit\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks from 3–4 weeks. The PCV can usually collects more than the CCV can\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by or an overfilled oil level\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Focus RS EcoBoost (2016–2018)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764962951470,"sku":"20-0328-FL","price":838.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0328-FL_ebaab448-eb8d-4989-97c8-bb7e7815e5c3.jpg?v=1792383459"},{"product_id":"radium-ccv-fluid-lock-catch-can-kit-ford-focus-rs-mk3-lz-16-17","title":"Radium CCV Fluid Lock Catch Can Kit - Ford Focus RS Mk3 LZ 16-17","description":"\u003ch2\u003eRadium Fluid Lock CCV Catch Can Kit, Ford Focus RS LZ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus RS LZ (2016–2018), EcoBoost\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0316-FL\u003c\/p\u003e\u003cp\u003eAt full throttle, the RS's crankcase breather sends oil and sludge into the intake pipe and intercooler, which cuts intercooler efficiency. This kit puts a Fluid Lock can inline with the breather port to catch it.\u003c\/p\u003e\u003cp\u003eIt mounts at the back left of the engine bay with no drilling. The patented Fluid Lock design stops the 207ml can overfilling. Pair it with the PCV kit for full coverage, or get the dual kit.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fluid-lock-pcv-catch-can-kit-ford-focus-st-lw-lz-11-18-focus-rs-lz-16-17\"\u003eRadium PCV Fluid Lock Catch Can Kit, Focus ST \/ RS (20-0315-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-catch-can-kit-ford-focus-rs-lz-16-17\"\u003eRadium Dual Fluid Lock Catch Can Kit, Focus RS (20-0328-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCovers the CCV side only. The 20-0328-FL dual kit combines both sides for the RS\u003c\/li\u003e\n\u003cli\u003eThe Focus ST uses the 20-0357-FL CCV kit\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick from 3–4 weeks\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by or an overfilled oil level\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Focus RS EcoBoost (2016–2018)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764962918702,"sku":"20-0316-FL","price":419.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0316-FL_9abe0174-be58-4071-916b-48fd654a4930.jpg?v=1792383459"},{"product_id":"radium-pcv-baffle-plate-ford-focus-st-rs-mustang-ecoboost-mazda-mps","title":"Radium PCV Baffle Plate - Ford Focus ST\/RS\/Mustang Ecoboost\/Mazda MPS","description":"\u003ch2\u003eRadium PCV Baffle Plate, Baffle Only, Ford EcoBoost \/ Duratec \/ Mazda MZR\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford EcoBoost and Duratec, and Mazda MZR engines (see list)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0327-02\u003c\/p\u003e\u003cp\u003eReplaces the factory plastic PCV plate and valve on the block. The CNC-machined aluminium plate adds baffling to keep oil sludge out of the intake without restricting airflow, and has two 10AN ORB ports above the baffles. This version is the plate only, so you choose the fittings and plumbing. The ports can be used for breathers, a catch can or an oil return. It fits with no permanent modifications.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-pcv-baffle-plate-oem-configuration-ford-ecoboost-focus-mustang-mazda-mzr-3-mps-6-mps\"\u003eRadium PCV Baffle Plate, OEM Configuration, Focus ST \/ RS (20-0327-01)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlate only. PCV valve, fittings and hose not included\u003c\/li\u003e\n\u003cli\u003eFor the Focus ST \/ RS, the 20-0327-01 kit adds Radium's upgraded PCV valve, as the OEM Ford valve leaks under boost\u003c\/li\u003e\n\u003cli\u003eOther brands of catch can kit may need some customising\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Focus ST 2013–2018, Focus RS 2016–2018 (EcoBoost)\u003c\/li\u003e\n\u003cli\u003eFord Mustang EcoBoost 2015–2023\u003c\/li\u003e\n\u003cli\u003eFord Fusion 2.0 EcoBoost 2013–2020\u003c\/li\u003e\n\u003cli\u003eFord Focus Duratec 2005–2012, Fiesta Duratec 2002–2008, Fusion Duratec 2006–2020\u003c\/li\u003e\n\u003cli\u003eMazda 3 MPS \/ Mazdaspeed3 2007–2013, Mazda 6 MPS \/ Mazdaspeed6 2006–2007 (MZR)\u003c\/li\u003e\n\u003cli\u003eMazda MX-5 MZR 2005–2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963213614,"sku":"20-0327-02","price":209.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0327-02.jpg?v=1792383459"},{"product_id":"radium-fluid-lock-crankcase-catch-can-kit-ford-fiesta-st-13-18","title":"Radium Fluid Lock Crankcase Catch Can Kit - Ford Fiesta ST 13-18","description":"\u003ch2\u003eRadium Fluid Lock Crankcase Catch Can Kit, Ford Fiesta ST\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Fiesta ST (2014–2019), 1.6L EcoBoost\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0378-FL\u003c\/p\u003e\u003cp\u003eAt full throttle the Fiesta ST's crankcase vent pushes a lot of blow-by, and the oil ends up in the intake pipe and intercooler. This kit puts a Fluid Lock can inline with the vent to catch it.\u003c\/p\u003e\u003cp\u003eThe can mounts on the two ECU studs at the rear left of the engine bay and fits under the factory engine cover, with no drilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-pcv-fluid-lock-catch-can-kit-ford-fiesta-st-13-18\"\u003eRadium PCV Fluid Lock Catch Can Kit, Fiesta ST (20-0377-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-catch-can-kit-ford-fiesta-st-13-18\"\u003eRadium Dual Fluid Lock Catch Can Kit, Fiesta ST (20-0379-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOn RHD cars the ECU cover near the battery is metal, and Radium's instructions say it has to be modified to fit this can\u003c\/li\u003e\n\u003cli\u003eCovers the crankcase vent side only. The PCV side is 20-0377-FL, or buy both as 20-0379-FL\u003c\/li\u003e\n\u003cli\u003eThere's no set emptying interval. Check the dipstick from 3–4 weeks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Fiesta ST (2014–2019)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963344686,"sku":"20-0378-FL","price":384.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0378-FL.jpg?v=1792383460"},{"product_id":"radium-fuel-filter-kit-ford-focus-rs-lz-16-17","title":"Radium Fuel Filter Kit - Ford Focus RS LZ 16-17","description":"\u003ch2\u003eRadium Fuel Filter Kit, Ford Focus RS LZ (2016–2018)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus RS 2016–2018 (not Focus ST)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0332-03 (stainless), 20-0332-05 (microglass)\u003c\/p\u003e\u003cp\u003eThe Focus RS filter sits between the in-tank and mechanical pumps, and the factory unit is restrictive. Radium's replacement cuts pump load by about 3–5.5 psi, and in their testing gave around 2% more flow with one aftermarket pump and 4.5% with two. Less load also means cooler fuel and lower current draw.\u003c\/p\u003e\u003cp\u003eIt goes in within minutes with a couple of spanners, no cutting or drilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-replacement-fuel-filter-element\"\u003eRadium Replacement Filter Element (18-0025)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with the Focus ST\u003c\/li\u003e\n\u003cli\u003eRadium doesn't state RHD fitment. Email us to confirm on Australian RHD cars before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Focus RS LZ 2016–2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Stainless","offer_id":67764963475758,"sku":"20-0332-03","price":375.99,"currency_code":"AUD","in_stock":true},{"title":"Microglass","offer_id":67764963508526,"sku":"20-0332-05","price":340.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0332.jpg?v=1792383459"},{"product_id":"radium-fuel-rail-kit-ford-shelby-gt500-s197-2007-2014","title":"Radium Fuel Rail Kit - Ford Shelby GT500 S197 2007-2014","description":"\u003ch2\u003eRadium Fuel Rail Kit – Ford Shelby GT500 S197\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Shelby GT500 S197 2007–2014 (5.4L supercharged)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0320\u003c\/p\u003e\u003cp\u003eOnce an S197 GT500 gets a smaller pulley, a bigger fuel pump or E85, the factory rails become a restriction and offer nowhere to mount a damper or pressure sensor. This high-flow kit replaces both rails with a larger bore design and adds eight 8AN ORB ports between them, so you can plumb the fuel system properly for more power.\u003c\/p\u003e\u003cp\u003eThe LH rail has three ports and is clearanced around the supercharger inlet pipe – its lower centre port is the usual spot for a pulse damper. The RH rail has five ports, including a top front port for the supplied OEM fuel pressure sensor adapter and a top rear port that suits an aftermarket pressure sender. Both rails are black anodised and laser etched, and work with OEM or OEM-equivalent injectors.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-v2-fpd-r-fuel-pulse-damper-8an-orb\"\u003eRadium V2 FPD-R Fuel Pulse Damper, 8AN ORB\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits OEM or OEM-equivalent injectors.\u003c\/li\u003e\n\u003cli\u003eFittings, fuel hose and injectors are not included.\u003c\/li\u003e\n\u003cli\u003eSpecific to the supercharged S197 Shelby GT500 – not the Mustang GT.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Shelby GT500 S197 2007–2014\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963410222,"sku":"20-0320","price":489.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0320.jpg?v=1792383459"},{"product_id":"radium-dual-fluid-lock-catch-can-kit-ford-fiesta-st-13-18","title":"Radium Dual Fluid Lock Catch Can Kit - Ford Fiesta ST 13-18","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Ford Fiesta ST\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Fiesta ST (2014–2019), 1.6L EcoBoost\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0379-FL\u003c\/p\u003e\u003cp\u003eThis is Radium's recommendation for full protection on the Fiesta ST: the PCV kit (20-0377-FL) and crankcase kit (20-0378-FL) together. The PCV can sits on the front right engine mount, inline with the PCV valve. The crankcase can sits on the ECU studs at the rear left, inline with the crankcase vent. Both fit under the factory engine cover.\u003c\/p\u003e\u003cp\u003eBetween them, oil stays out of the manifold, intake pipe and intercooler, whether you're cruising or on boost. Both use the patented Fluid Lock can.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOn RHD cars the ECU cover near the battery is metal, and Radium's instructions say it has to be modified to fit the crankcase can\u003c\/li\u003e\n\u003cli\u003eThere's no set emptying interval. Check the dipsticks from 3–4 weeks. The PCV can usually collects more than the CCV can\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, an overfilled crankcase, poor breather placement or a PCV valve that doesn't close under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Fiesta ST (2014–2019)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963442990,"sku":"20-0379-FL","price":751.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0379-FL.jpg?v=1792383459"},{"product_id":"radium-fuel-surge-tank-install-kit-ford-f150-raptor-2017-2020","title":"Radium Fuel Surge Tank Install Kit - Ford F150 Raptor 2017-2020","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Ford F-150 EcoBoost \/ Raptor\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford F-150 EcoBoost V6 (2015–2020) and F-150 Raptor (2017–2020)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0487\u003c\/p\u003e\n\u003cp\u003eTuned EcoBoost F-150s and Raptors run out of fuel pump quickly, especially on E85. This kit installs a Radium FST-R regulated surge tank. The factory pump is repurposed to keep the surge tank full, with excess going back to the main tank, and the surge tank pump feeds the engine through the FST-R's built-in regulator. If the OEM pump is momentarily starved off-road or under load, the engine keeps getting fuel.\u003c\/p\u003e\n\u003cp\u003eSome FST-R pump options outflow the factory Raptor pump by more than 23%. The surge tank mounts in a collision-safe spot under the left-hand side of the truck on a polished stainless bracket that bolts to OEM points. The included gauge lets you set pressure, running vacuum referenced (1:1) or static to mimic stock.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fstr-ra-fuel-surge-tank-w-integrated-fpr-fuel-pressure-regulator\"\u003eRadium FST-R RA Fuel Surge Tank with Integrated Regulator (20-1933)\u003c\/a\u003e – required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe FST-R surge tank and a surge tank pump are sold separately. Order the kit, surge tank and pump together for a complete system.\u003c\/li\u003e\n\u003cli\u003eYou may need a drop-in main tank pump. As a guide it should flow about 40–50% of the surge tank pump.\u003c\/li\u003e\n\u003cli\u003eWiring uses flying leads, Raychem butt splices and a weatherproof fuse and relay. No soldering, under 30 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord F-150 EcoBoost V6 (2015–2020)\u003c\/li\u003e\n\u003cli\u003eFord F-150 Raptor EcoBoost V6 (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764965310766,"sku":"20-0487","price":786.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0487_612b9063-e0a1-46e5-ba92-db54fbd8f702.jpg?v=1792383464"},{"product_id":"radium-catch-can-kit-ccv-15-17-ford-mustang-gt-fluid-lock","title":"Radium Catch Can Kit, CCV, 15-17 Ford Mustang GT, Fluid Lock","description":"\u003ch2\u003eRadium Fluid Lock CCV Catch Can Kit, Ford Mustang GT S550 (2015–2017)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT S550 (2015–2017), 5.0L Coyote\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0287-FL\u003c\/p\u003e\u003cp\u003eAt full throttle the Coyote's crankcase breather pushes oil into the air filter inlet pipe, where it coats the throttle body and manifold. This kit catches it with a Fluid Lock can on the front left bank, inline between the crankcase breather and the inlet pipe.\u003c\/p\u003e\u003cp\u003eIt bolts in on a laser-cut Mustang bracket with no drilling. The patented Fluid Lock design stops the 207ml can overfilling and dumping oil back into the intake.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-pcv-fluid-lock-catch-can-kit-ford-mustang-gt-2011-2017\"\u003eRadium PCV Fluid Lock Catch Can Kit, Mustang GT (20-0267-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-catch-can-kit-15-17-ford-mustang-gt-fluid-lock\"\u003eRadium Dual Fluid Lock Catch Can Kit, Mustang GT S550 (20-0325-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eS550 (2015–2017) only. For the 2011–2014 S197, use 20-0279-FL\u003c\/li\u003e\n\u003cli\u003eAdd the 20-0267-FL PCV kit for full coverage. Together they equal the 20-0325-FL dual kit\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick after 3–4 weeks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Mustang GT S550 (2015–2017), 5.0L\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765008433454,"sku":"20-0287-FL","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0287-FL.jpg?v=1792383701"},{"product_id":"radium-dual-catch-can-kit-15-18-ford-focus-st-fluid-lock","title":"Radium Dual Catch Can Kit, 15-18 Ford Focus ST, Fluid Lock","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Ford Focus ST LZ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus ST LZ (2015–2018), 2.0L EcoBoost\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0358-FL\u003c\/p\u003e\u003cp\u003eThis kit covers both breather circuits on the Focus ST. The PCV can on the front left core support catches what gets pulled into the manifold at idle and cruise. The CCV can at the back left of the engine bay catches the oil pushed into the intake pipe and intercooler under boost.\u003c\/p\u003e\u003cp\u003eBoth bolt in with no drilling and use the patented 207ml Fluid Lock can. You'll need a sound symposer delete for clearance.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-sound-symposer-delete-kit-ford-focus-st-lw-lz-11-18\"\u003eRadium Sound Symposer Delete Kit, Focus ST (20-0356)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds the 20-0356 sound symposer delete (or another symposer delete), sold separately\u003c\/li\u003e\n\u003cli\u003eRadium doesn't specify RHD or LHD. Email us to confirm fitment on an Australian-delivered ST\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks after 3–4 weeks. The PCV can usually collects more than the CCV can\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, an overfilled sump, poor breather baffling or a PCV valve leaking under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Focus ST (2015–2018), 2.0L EcoBoost\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765010989358,"sku":"20-0358-FL","price":838.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0358-FL.jpg?v=1792383714"},{"product_id":"radium-dual-catch-can-kit-15-17-ford-mustang-gt-fluid-lock","title":"Radium Dual Catch Can Kit, 15-17 Ford Mustang GT, Fluid Lock","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Ford Mustang GT S550 (2015–2017)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT S550 (2015–2017), 5.0L Coyote\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0325-FL\u003c\/p\u003e\u003cp\u003eThis kit gives full protection for the S550 GT: the PCV can on the front right bank, between the PCV breather and the intake manifold, and the CCV can on the front left bank, between the crankcase breather and the air filter inlet pipe. Between them, oil stays out of the throttle body and manifold whether you're cruising or at full throttle.\u003c\/p\u003e\u003cp\u003eBoth bolt in on Mustang-specific brackets with no drilling, and both use the patented Fluid Lock can.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eS550 (2015–2017) only. For the 2011–2014 S197, use 20-0324-FL\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks after 3–4 weeks. The PCV can usually collects more than the CCV can\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, an overfilled sump, poor breather baffling or a PCV valve leaking under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Mustang GT S550 (2015–2017), 5.0L\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765011087662,"sku":"20-0325-FL","price":786.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0325-FL.jpg?v=1792383715"},{"product_id":"radium-fuel-pump-hanger-2011-ford-mustang-shelby","title":"Radium Fuel Pump Hanger, 2011+ Ford Mustang\/Shelby","description":"\u003ch2\u003eRadium Fuel Pump Hanger, Ford Mustang \/ Shelby 2011+\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang 2011+ (S197, S550 and S650), including Shelby models\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1800, 20-1801, 20-1802, 20-0802-00\u003c\/p\u003e\u003cp\u003eA drop-in replacement for the factory pump module that lifts fuel flow for modified Mustangs, including Australian-delivered FM \/ FN S550s. It runs one or two aftermarket pumps (not included) and is E85 rated. A collector box keeps fuel around the pumps, fed by venturi scavenging, regulator return and two one-way fill valves. A single adjustable 1:1 regulator is built in, and the factory level sender and tank cover are reused.\u003c\/p\u003e\u003cp\u003eChoose the version that matches your pumps: 20-1800 for Walbro GSS342 or AEM 50-1200, 20-1801 for the TI E5LM brushless kit, or 20-1802 for the Walbro \/ TI F9000-series family and similar pumps.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-ford-mustang-2015-2017\"\u003eRadium Fuel Hanger Plumbing Kit, Stainless Filter, Mustang 2015–2017 (20-1816-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-ford-mustang-2018\"\u003eRadium Fuel Hanger Plumbing Kit, Stainless Filter, Mustang 2018+ (20-1817-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-fpr-block-off-plate-ford-mustang-s197-s550-11\"\u003eRadium Fuel Hanger FPR Block Off Plate, Mustang (20-0806)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePumps not included. The installer fits them\u003c\/li\u003e\n\u003cli\u003eThe in-tank low-micron filter is removed, so an external low-micron filter is required (it's in the plumbing kits)\u003c\/li\u003e\n\u003cli\u003eRadium notes the starvation protection isn't guaranteed. A surge tank may be needed for full redundancy\u003c\/li\u003e\n\u003cli\u003eThe venturi uses about 15–45 LPH of feed flow, so allow for it when sizing pumps\u003c\/li\u003e\n\u003cli\u003eThe factory pump wiring only suits a single pump, and upgrading it is recommended\u003c\/li\u003e\n\u003cli\u003eUse only one regulator in the system when running the built-in one\u003c\/li\u003e\n\u003cli\u003e20-1801 includes two bolt-on check valves so the pumps can be staged. On 20-1802, pumps without an integrated check valve (F90000295, BR540, DW810) can't be staged as a pair\u003c\/li\u003e\n\u003cli\u003e20-0802-00 isn't on Radium's current listing, so email us before ordering that option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang 2011+, all models (S197, S550, S650)\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT \/ GTE \/ GT-H \/ GTS 2011–2016\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT350 2011–2013 (S197) and 2015–2020 (S550)\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT500 2013–2014 (S197) and 2020–2022 (S550)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro F90000267\/274\/285\/295","offer_id":67765019181358,"sku":"20-0802-00","price":933.75,"currency_code":"AUD","in_stock":true},{"title":"Walbro F90000267\/274\/285\/295\/E5LM","offer_id":67765019214126,"sku":"20-1802","price":1100.99,"currency_code":"AUD","in_stock":true},{"title":"Walbro GSS342\/AEM 50-1200","offer_id":67765019246894,"sku":"20-1800","price":1048.99,"currency_code":"AUD","in_stock":true},{"title":"Ti Automotive E5LM","offer_id":67765019279662,"sku":"20-1801","price":1135.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-180.jpg?v=1792383771"},{"product_id":"radium-engineering-fuel-rail-plumbing-kit-ford-302-351-windsor","title":"Radium Engineering Fuel Rail Plumbing Kit – Ford 302\/351 Windsor","description":"\u003ch2\u003eRadium Fuel Rail Plumbing Kit, Ford 302 \/ 351 Windsor\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Falcon \/ Fairlane 1991–2002 Windsor V8 and other EFI 302\/351 Windsor applications with Radium 20-1302 fuel rails\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1302-PK\u003c\/p\u003e\u003cp\u003ePlumbs Radium's Windsor rails with PushLok hose ends and EFI hose, replacing the factory fuel components downstream of the spring-lock lines. It's ideal for a 5.0 EL\/AU Falcon or Fairlane running a blower or E85. A high-flow dead-head MPR-RA regulator runs both rails in parallel, and there's a 0–100 psi gauge for setting pressure. Spring-lock adapters, disconnect tools and plugs for unused ports are all included.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-rails-ford-302-351-windsor\"\u003eRadium Fuel Rails, Ford 302 \/ 351 Windsor (20-1302)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-bosch-ev1-injector-connector-adapter\"\u003eRadium Bosch EV1 Injector Connector Adapter (17-0064)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires Radium 20-1302 fuel rails (sold separately)\u003c\/li\u003e\n\u003cli\u003eThe EV1 connector adapter may be needed depending on your injectors\u003c\/li\u003e\n\u003cli\u003eE85 compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Falcon 1991–2002\u003c\/li\u003e\n\u003cli\u003eFord Fairlane 1991–2002\u003c\/li\u003e\n\u003cli\u003eFord Mustang 1986–1995, Mustang Cobra \/ Cobra R 1993–1995\u003c\/li\u003e\n\u003cli\u003eFord F-Series 1988–1997, F-150 Lightning 1993–1995, Bronco 1988–1996, E-Series 1988–1996, Explorer 1996–2001\u003c\/li\u003e\n\u003cli\u003eFord LTD Crown Victoria 1988–1991, Thunderbird 1991–1993\u003c\/li\u003e\n\u003cli\u003eLincoln Mark VII 1987–1992\u003c\/li\u003e\n\u003cli\u003eMercury Capri 1986, Colony Park \/ Marquis 1988–1991, Cougar 1991–1993, Mountaineer 1997–2001\u003c\/li\u003e\n\u003cli\u003ePanoz Roadster 1990–1996\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765033926958,"sku":"20-1302-PK","price":839.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/TITLE_PIC_website_20-1302-PK_437b1ffd-af82-4a9e-b345-8616a5453344.webp?v=1792383886"},{"product_id":"radium-engineering-fuel-rails-ford-302-351-windsor","title":"Radium Engineering Fuel Rails – Ford 302\/351 Windsor","description":"\u003ch2\u003eRadium Fuel Rails – Ford 302 \/ 351 Windsor EFI\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Falcon and Fairlane 5.0L V8 1991–2002, Mustang 5.0 and other 302 \/ 351 Windsor EFI engines\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1302\u003c\/p\u003e\u003cp\u003eThe EFI Windsor in the EB–AU Falcon and Fairlane, along with the Fox and SN95 Mustang, is a popular base for supercharged and stroker builds, and the factory rails are one of the first restrictions you'll hit. These billet rails have 5\/8in internal bores to support any power level, and are shaped to clear the distributor while still flowing as much fuel as possible.\u003c\/p\u003e\u003cp\u003eInjectors sit square to the lower intake injector seats just like the factory rails, so no spacers are needed. Each rail has three 8AN ORB ports (six total) and 1\/8in NPT provision. CNC-machined from 6061 aluminium, black anodised and laser etched, and E85 compatible.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-rail-plumbing-kit-ford-302-351-windsor\"\u003eRadium Fuel Rail Plumbing Kit – Ford 302 \/ 351 Windsor (20-1302-PK)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-bosch-ev1-injector-connector-adapter\"\u003eRadium Bosch EV1 Injector Connector Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdd the 20-1302-PK plumbing kit for a complete setup with a multi-port regulator, gauge and spring-lock adapters.\u003c\/li\u003e\n\u003cli\u003eInjector connector adapters may be needed depending on the injectors you run.\u003c\/li\u003e\n\u003cli\u003eFittings, injectors and fuel pressure regulator are not included with the rails.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Falcon 5.0L V8 (EB–AU) 1991–2002\u003c\/li\u003e\n\u003cli\u003eFord Fairlane 5.0L V8 1991–2002\u003c\/li\u003e\n\u003cli\u003eFord Mustang 5.0 1986–1995, incl. Cobra \/ Cobra R\u003c\/li\u003e\n\u003cli\u003eFord F-Series, Bronco, E-Series, Explorer and other 302 \/ 351 Windsor EFI applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765034582318,"sku":"20-1302","price":439.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/TITLEPICwebsite20-1302.webp?v=1792383885"},{"product_id":"radium-pcv-fluid-lock-catch-can-kit-ford-mustang-gt-2011-2017","title":"Radium PCV Fluid Lock Catch Can Kit, Ford Mustang GT (2011-2017)","description":"\u003ch2\u003eRadium Fluid Lock PCV Catch Can Kit, Ford Mustang GT (2011–2017)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT S197 (2011–2014) and S550 (2015–2017), 5.0L Coyote\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0267-FL\u003c\/p\u003e\u003cp\u003eOne PCV kit for both Coyote-powered chassis. The Fluid Lock can mounts on the front right bank, inline between the PCV breather and the intake manifold. It catches the oil and condensation that get drawn into the manifold at idle and cruise.\u003c\/p\u003e\u003cp\u003eIt bolts in on a laser-cut Mustang bracket with no drilling. The patented Fluid Lock design stops the 207ml can overfilling. Pair it with the matching CCV kit for your chassis for full coverage.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ccv-fluid-lock-catch-can-kit-ford-mustang-gt-2011-2014\"\u003eRadium CCV Fluid Lock Catch Can Kit, Mustang GT S197 (20-0279-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-kit-ccv-15-17-ford-mustang-gt-fluid-lock\"\u003eRadium CCV Fluid Lock Catch Can Kit, Mustang GT S550 (20-0287-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCovers the PCV side only. Pair it with 20-0279-FL (2011–2014) or 20-0287-FL (2015–2017), or choose a dual kit\u003c\/li\u003e\n\u003cli\u003eRadium's listing doesn't mention RHD. Email us to confirm fitment on an Australian-delivered Mustang\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick after 3–4 weeks. PCV cans usually collect more than CCV cans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang GT S197 (2011–2014), 5.0L Coyote\u003c\/li\u003e\n\u003cli\u003eFord Mustang GT S550 (2015–2017), 5.0L Coyote\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765040775470,"sku":"20-0267-FL","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0267-FL.jpg?v=1792383942"},{"product_id":"radium-ccv-fluid-lock-catch-can-kit-ford-mustang-gt-2011-2014","title":"Radium CCV Fluid Lock Catch Can Kit, Ford Mustang GT (2011-2014)","description":"\u003ch2\u003eRadium Fluid Lock CCV Catch Can Kit, Ford Mustang GT S197 (2011–2014)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT S197 (2011–2014), 5.0L Coyote\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0279-FL\u003c\/p\u003e\u003cp\u003eAt full throttle the Coyote's crankcase breather pushes oil into the air filter inlet pipe. This kit catches it with a Fluid Lock can on the front left bank, inline between the crankcase breather and the inlet pipe.\u003c\/p\u003e\u003cp\u003eIt bolts in on a laser-cut Mustang bracket with no drilling, and the patented Fluid Lock design stops the 207ml can overfilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-pcv-fluid-lock-catch-can-kit-ford-mustang-gt-2011-2017\"\u003eRadium PCV Fluid Lock Catch Can Kit, Mustang GT (20-0267-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fluid-lock-catch-can-kit-ford-mustang-gt-2011-2014\"\u003eRadium Dual Fluid Lock Catch Can Kit, Mustang GT S197 (20-0324-FL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCovers the CCV side only. Pair it with the 20-0267-FL PCV kit, or choose the 20-0324-FL dual kit\u003c\/li\u003e\n\u003cli\u003eFor the 2015–2017 S550, the CCV kit is 20-0287-FL\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick after 3–4 weeks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Mustang GT S197 (2011–2014), 5.0L Coyote\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765040742702,"sku":"20-0279-FL","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0279-FL_1a540307-bffa-4ef4-a001-b1bd4c2f0f11.jpg?v=1792383942"},{"product_id":"radium-dual-fluid-lock-catch-can-kit-ford-mustang-gt-2011-2014","title":"Radium Dual Fluid Lock Catch Can Kit, Ford Mustang GT (2011-2014)","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Ford Mustang GT S197 (2011–2014)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT S197 (2011–2014), 5.0L Coyote\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0324-FL\u003c\/p\u003e\u003cp\u003eThis is Radium's recommended setup for the S197 GT: the PCV kit (20-0267-FL) and CCV kit (20-0279-FL) in one box. The PCV can sits on the front right bank between the PCV breather and the manifold. The CCV can sits on the front left bank between the crankcase breather and the air filter inlet pipe. Both sides of the crankcase ventilation are covered.\u003c\/p\u003e\u003cp\u003eBoth bolt in on Mustang-specific brackets with no drilling, and both use the patented Fluid Lock can.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAlso sold separately as the 20-0267-FL PCV kit and the 20-0279-FL CCV kit\u003c\/li\u003e\n\u003cli\u003eFor the 2015–2017 S550, the dual kit is 20-0325-FL\u003c\/li\u003e\n\u003cli\u003eRadium's listing doesn't mention RHD. Email us to confirm fitment before ordering\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks after 3–4 weeks. The PCV can usually collects more than the CCV can\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Mustang GT S197 (2011–2014), 5.0L Coyote\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765040808238,"sku":"20-0324-FL","price":786.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0324-FL.jpg?v=1792383942"},{"product_id":"radium-dual-fluid-lock-catch-can-kit-ford-shelby-gt500-s197","title":"Radium Dual Fluid Lock Catch Can Kit, Ford Shelby GT500 (S197)","description":"\u003ch2\u003eRadium Dual Fluid Lock Catch Can Kit, Ford Shelby GT500 S197\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Shelby GT500 S197 (Radium's instructions cover 2010–2014)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0329-FL\u003c\/p\u003e\u003cp\u003eThis kit covers both sides of the supercharged GT500's crankcase ventilation. The PCV can runs inline with the PCV valve and keeps it working as standard. It catches the vapour and sludge drawn into the manifold at idle, cruise and on decel. The CCV can sits on the crankcase breather and catches the oil pushed into the intake pipe at full throttle.\u003c\/p\u003e\u003cp\u003eThe cans are pressure sealed, so they suit the supercharged engine and can connect straight to the manifold. They bolt in on an S197-specific bracket with no drilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang \/ Shelby 2011+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipsticks after 3–4 weeks. The PCV can usually collects more than the CCV can\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, overfilled oil, poor breather baffling or a PCV valve not closing under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Shelby GT500 S197 (2010–2014)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765040841006,"sku":"20-0329-FL","price":786.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0329-FL.jpg?v=1792383942"},{"product_id":"radium-pcv-fluid-lock-catch-can-kit-ford-f-150-raptor-ecoboost-v6-2015-2020","title":"Radium PCV Fluid Lock Catch Can Kit, Ford F-150 \/ Raptor EcoBoost V6 (2015-2020)","description":"\u003ch2\u003eRadium Fluid Lock PCV Catch Can Kit, Ford F-150 \/ Raptor 3.5L EcoBoost\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford F-150 and Raptor (2015–2020), 3.5L EcoBoost V6\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0481-FL\u003c\/p\u003e\u003cp\u003eThe twin-turbo, direct-injected 3.5L EcoBoost pushes oil vapour through its PCV system into the intake, where it bakes onto the valves and coats the intercooler. This kit catches it with a Fluid Lock can on an F-150-specific bracket, with no drilling.\u003c\/p\u003e\u003cp\u003eThe patented Fluid Lock design stops the 207ml can overfilling and holds the oil until you empty it. Everything needed for the install is in the box.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium lists the 3.5L EcoBoost V6 only. The 2.7L isn't listed\u003c\/li\u003e\n\u003cli\u003eRadium's listing doesn't mention RHD. Email us to confirm fitment on an Australian-converted truck\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick after 3–4 weeks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord F-150 (2015–2020), 3.5L EcoBoost V6\u003c\/li\u003e\n\u003cli\u003eFord F-150 Raptor (2015–2020), 3.5L EcoBoost V6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765040906542,"sku":"20-0481-FL","price":428.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/TITLE_PIC_website_20-0481-FL.jpg?v=1792383942"},{"product_id":"radium-pcv-fluid-lock-catch-can-kit-ford-mustang-gt-2018","title":"Radium PCV Fluid Lock Catch Can Kit, Ford Mustang GT (2018+)","description":"\u003ch2\u003eRadium Fluid Lock PCV Catch Can Kit, Ford Mustang GT (2018+)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT S550 (2018–2023) and S650 (2024+), 5.0L Coyote\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1267-FL\u003c\/p\u003e\u003cp\u003eThe facelifted S550 and the new S650 use a different PCV layout from the early cars, so they get their own kit. The Fluid Lock can mounts on the front right strut tower, inline between the PCV valve and the intake manifold. It catches the oil vapour that gets drawn in at idle and cruise.\u003c\/p\u003e\u003cp\u003e16mm SAE quick connects and factory-style spring clamps give a clean, OEM-looking install with no drilling.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-petcock-drain-kit\"\u003eRadium Catch Can Petcock Drain Kit (20-0024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-catch-can-o-ring-service-kit\"\u003eRadium Catch Can O-Ring Service Kit (20-0057)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts on the front right strut tower. Radium doesn't mention RHD, so email us to confirm fitment on an Australian-delivered Mustang\u003c\/li\u003e\n\u003cli\u003eThere's no fixed emptying interval. Check the dipstick after 3–4 weeks\u003c\/li\u003e\n\u003cli\u003eCollecting a lot of oil can point to blow-by, overfilled oil, poor breather baffling or a PCV valve not closing under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang GT S550 (2018–2023), 5.0L Coyote\u003c\/li\u003e\n\u003cli\u003eFord Mustang GT S650 (2024+), 5.0L Coyote\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765040939310,"sku":"20-1267-FL","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1267-FL_1200px_wide.jpg?v=1792383942"},{"product_id":"radium-fuel-rails-ford-coyote-voodoo","title":"Radium Fuel Rails, Ford Coyote \/ Voodoo","description":"\u003ch2\u003eRadium Fuel Rails – Ford Coyote \/ Voodoo\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT 2011–2023 (5.0L Coyote), Shelby GT350 (5.2L Voodoo), F-150 5.0L\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1433\u003c\/p\u003e\u003cp\u003eSupercharged, turbo and E85 Coyotes quickly outgrow the factory rails. These high-flow billet replacements have large internal bores to support any power level, making them a solid foundation for a blown S550 Mustang on the street, at the drags or on track.\u003c\/p\u003e\u003cp\u003eThe 14mm injector bores match the factory rails, so OEM injectors fit and the retaining clip provisions index every factory injector correctly. Two sets of mounting feet cover all Coyote intake manifolds, and the ports are tapped 8AN ORB and 1\/8in NPT. CNC-machined from solid 6061 aluminium, black anodised and laser etched.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-ford-coyote-voodoo\"\u003eRadium Fuel Rail Plumbing Kit – Ford Coyote \/ Voodoo (20-1433-PK)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdd the 20-1433-PK plumbing kit for a bolt-on install that reuses the factory hoses and sensors.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the 2024+ Mustang (S650).\u003c\/li\u003e\n\u003cli\u003eFittings and injectors are not included with the rails.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang GT S550 2015–2023 (5.0L Coyote)\u003c\/li\u003e\n\u003cli\u003eFord Mustang GT S197 2011–2014 (5.0L Coyote)\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT350 2015–2020 (5.2L Voodoo)\u003c\/li\u003e\n\u003cli\u003eFord F-150 5.0L Coyote\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765040972078,"sku":"20-1433","price":419.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1433_1200px_wide.jpg?v=1792383942"},{"product_id":"radium-fuel-rail-plumbing-kit-ford-coyote-voodoo","title":"Radium Fuel Rail Plumbing Kit, Ford Coyote \/ Voodoo","description":"\u003ch2\u003eRadium Fuel Rail Plumbing Kit, Ford Coyote \/ Voodoo\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford 5.0 Coyote and 5.2 Voodoo with Radium 20-1433 fuel rails (not 2024+ S650)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1433-PK\u003c\/p\u003e\u003cp\u003eMakes Radium's Coyote \/ Voodoo rails a true OEM bolt-on. Nothing else is needed, and all the factory hoses and sensors are reused. An 8AN PTFE crossover links the rails and plugs cover every unused port. For 2018+ direct-injected Coyotes, there's a pressure sensor adapter and a mechanical pump feed adapter. On 2011–2017 engines, the supplied 1\/8\" NPT plugs are used instead. Some parts won't be needed on every engine.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rails-ford-coyote-voodoo\"\u003eRadium Fuel Rails, Ford Coyote \/ Voodoo (20-1433)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-ford-mustang-2018\"\u003eRadium Fuel Hanger Plumbing Kit, Mustang 2018+ (20-1817)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with the 2024+ S650 Mustang\u003c\/li\u003e\n\u003cli\u003eRequires Radium 20-1433 rails (sold separately)\u003c\/li\u003e\n\u003cli\u003eThis kit replaces the need for the separate 14-0358 and 14-0359 adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang GT 2011–2023 (Coyote 5.0)\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT350 2015–2020 (Voodoo 5.2)\u003c\/li\u003e\n\u003cli\u003eFord F-150 5.0 Coyote\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765041004846,"sku":"20-1433-PK","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1433-PK_9a13ec90-1e4d-4893-b821-8a4ed31dfed9.jpg?v=1792383942"},{"product_id":"radium-fuel-hanger-plumbing-kit-with-microglass-filter-ford-mustang-2018","title":"Radium Fuel Hanger Plumbing Kit with Microglass Filter, Ford Mustang (2018+)","description":"\u003ch2\u003eRadium Fuel Hanger Plumbing Kit, Ford Mustang 2018+ (S550 \/ S650), Microglass Filter\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang S550 2018–2023 and S650 2024+, with a Radium 20-180X hanger\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1817-05\u003c\/p\u003e\u003cp\u003eTurns a Radium-hangered 2018+ Mustang into a full return-style fuel system, from the tank to the engine bay. New 8AN and 6AN PTFE lines replace the factory parts, with the long 8AN feed held in billet retainers under the car. A check-valve filter sits in a heat-shield bracket, and the OEM feed hard line becomes the return. These Coyotes run both port and direct injection, so the kit uses Radium's DFPR dual regulator. It can run boost-referenced at 1:1 and comes with adapters for the DI high-pressure pump and the port rail. The hanger's integrated FPR is blocked off, and the external filter is required because the Radium hanger removes the in-tank fine filter. This version uses a 6 micron microglass element.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+ (20-1800 \/ 20-1801 \/ 20-1802)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rails-ford-coyote-voodoo\"\u003eRadium Fuel Rails, Ford Coyote \/ Voodoo (20-1433)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pressure-gauge-0-100psi\"\u003eRadium Fuel Pressure Gauge 0–100 psi (20-0029)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-ford-mustang-2018\"\u003eRadium Mustang 2018+ Plumbing Kit, Stainless Filter (20-1817-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires a Radium 20-180X hanger. Pumps, rails and injectors not included (OEM injectors can be reused)\u003c\/li\u003e\n\u003cli\u003eNo pressure gauge is included\u003c\/li\u003e\n\u003cli\u003eManual cars: the clutch line bracket needs to be moved slightly to clear the filter inlet\u003c\/li\u003e\n\u003cli\u003eRadium doesn't state RHD fitment. Email us to confirm on Australian RHD cars before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang S550 2018–2023, all models\u003c\/li\u003e\n\u003cli\u003eFord Mustang S650 2024+, all models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765042151726,"sku":"20-1817-05","price":1889.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1817-XX_ad0b8988-f2fc-4f34-b7da-dd76630a61a7.jpg?v=1792383950"},{"product_id":"radium-fuel-brake-line-retainer-kit-ford-mustang-2015","title":"Radium Fuel \u0026 Brake Line Retainer Kit, Ford Mustang (2015+)","description":"\u003ch2\u003eRadium Fuel and Brake Line Retainer Kit, Ford Mustang 2015+\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang S550 2015–2023 and S650 2024+\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1814\u003c\/p\u003e\u003cp\u003eReplaces the plastic clips that hold the factory hard lines under the 2015+ Mustang. The billet clamps hold a large aftermarket feed line, sized for Radium 8AN PTFE hose, alongside the factory lines. In Radium's Mustang hanger plumbing kits the factory feed line becomes the return. A vinyl cap stops the hose chafing, and the anodised 6061 clamps have stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-ford-mustang-2015-2017\"\u003eRadium Fuel Hanger Plumbing Kit, Stainless Filter, Mustang 2015–2017 (20-1816-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-ford-mustang-2018\"\u003eRadium Fuel Hanger Plumbing Kit, Stainless Filter, Mustang 2018+ (20-1817-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel lines not included\u003c\/li\u003e\n\u003cli\u003eSized for Radium 8AN PTFE feed hose. For other line types, check the retainer dimensions image\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang S550, 2015–2023\u003c\/li\u003e\n\u003cli\u003eFord Mustang S650, 2024+\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765042282798,"sku":"20-1814","price":139.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1814_1200px_wide.jpg?v=1792383951"},{"product_id":"radium-fuel-rail-ford-barra-all","title":"Radium Fuel Rail, Ford Barra (All)","description":"\u003ch2\u003eRadium Fuel Rail – Ford Barra (All)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e All Ford Barra inline-six engines – Falcon BA \/ BF \/ FG \/ FG X and Territory, turbo and non-turbo\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1536\u003c\/p\u003e\u003cp\u003eThe Barra is Australia's favourite big-power six, and whether it's a street FG XR6 Turbo, a drag car or a turbo-converted non-turbo, the factory rail is one of the first things to go. This high-flow upgrade rail has a 17.5mm centre bore to keep all six injectors evenly supplied, on petrol or E85.\u003c\/p\u003e\u003cp\u003eOne rail now covers every Barra, replacing Radium's earlier BA–BF Turbo, FG Turbo and FG non-turbo rails. It's CNC-machined from extruded 6063 aluminium, black anodised and laser etched, with 8AN ORB ports so you can plumb it however your build needs.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-v2-fpd-r-fuel-pulse-damper-8an-orb\"\u003eRadium V2 FPD-R Fuel Pulse Damper, 8AN ORB\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dmr-ra-direct-mount-fuel-pressure-regulator\"\u003eRadium DMR-RA Direct Mount Fuel Pressure Regulator\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces Radium's earlier 20-0536-01 (BA–BF Turbo), 20-0536-02 (FG Turbo) and 20-0536-03 (FG non-turbo) rails.\u003c\/li\u003e\n\u003cli\u003eFittings, injectors and fuel pressure regulator are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Falcon BA \/ BF (Barra, turbo and non-turbo)\u003c\/li\u003e\n\u003cli\u003eFord Falcon FG \/ FG X (Barra, turbo and non-turbo)\u003c\/li\u003e\n\u003cli\u003eFord Territory (Barra, turbo and non-turbo)\u003c\/li\u003e\n\u003cli\u003eBarra engine swaps\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765042544942,"sku":"20-1536","price":594.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1356.jpg?v=1792383954"},{"product_id":"radium-fuel-hanger-plumbing-kit-with-stainless-filter-ford-mustang-2015-2017","title":"Radium Fuel Hanger Plumbing Kit with Stainless Filter, Ford Mustang (2015-2017)","description":"\u003ch2\u003eRadium Fuel Hanger Plumbing Kit, Ford Mustang S550 (2015–2017), Stainless Filter\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang S550 2015–2017 incl. Shelby GT350 \/ GT500, with a Radium 20-180X hanger\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1816-03\u003c\/p\u003e\u003cp\u003eTurns a Radium-hangered early S550 into a full return-style fuel system, from the tank to the engine bay. It's what you want on a supercharged or E85 Coyote. New 8AN and 6AN PTFE lines replace the factory parts, with the long 8AN feed held in billet retainers under the car. A check-valve filter sits in a heat-shield bracket, and the OEM feed hard line becomes the return. These cars are port injection only, so the kit uses Radium's multi-port MPR regulator. The hanger's integrated FPR is blocked off with the included kit. The Radium hanger removes the in-tank fine filter, so this external filter is required. This version uses a cleanable stainless element.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+ (20-1800 \/ 20-1801 \/ 20-1802)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rails-ford-coyote-voodoo\"\u003eRadium Fuel Rails, Ford Coyote \/ Voodoo (20-1433)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pressure-gauge-0-100psi\"\u003eRadium Fuel Pressure Gauge 0–100 psi (20-0029)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-ford-mustang-2015-2017\"\u003eRadium Mustang 15–17 Plumbing Kit, Microglass Filter (20-1816-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires a Radium 20-180X hanger. Pumps, rails and injectors not included (OEM injectors can be reused)\u003c\/li\u003e\n\u003cli\u003eNo pressure gauge is included\u003c\/li\u003e\n\u003cli\u003eManual cars: the clutch line bracket needs to be moved slightly to clear the filter inlet\u003c\/li\u003e\n\u003cli\u003eRadium doesn't state RHD fitment. Email us to confirm on Australian RHD cars before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang S550 2015–2017, all models\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT \/ GTE \/ GT-H \/ GTS S550 2015–2016\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT350 S550 2015–2020\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT500 S550 2020–2022\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765042610478,"sku":"20-1816-03","price":1714.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1816-XX_1200x800_885baecc-899b-4f23-9adb-41719e1d0bdb.jpg?v=1792383955"},{"product_id":"radium-fuel-hanger-plumbing-kit-with-stainless-filter-ford-mustang-2018","title":"Radium Fuel Hanger Plumbing Kit with Stainless Filter, Ford Mustang (2018+)","description":"\u003ch2\u003eRadium Fuel Hanger Plumbing Kit, Ford Mustang 2018+ (S550 \/ S650), Stainless Filter\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang S550 2018–2023 and S650 2024+, with a Radium 20-180X hanger\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1817-03\u003c\/p\u003e\u003cp\u003eTurns a Radium-hangered 2018+ Mustang into a full return-style fuel system, from the tank to the engine bay. New 8AN and 6AN PTFE lines replace the factory parts, with the long 8AN feed held in billet retainers under the car. A check-valve filter sits in a heat-shield bracket, and the OEM feed hard line becomes the return. These Coyotes run both port and direct injection, so the kit uses Radium's DFPR dual regulator. It can run boost-referenced at 1:1 and comes with adapters for the DI high-pressure pump and the port rail. The hanger's integrated FPR is blocked off, and the external filter is required because the Radium hanger removes the in-tank fine filter. This version uses a cleanable stainless element.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+ (20-1800 \/ 20-1801 \/ 20-1802)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rails-ford-coyote-voodoo\"\u003eRadium Fuel Rails, Ford Coyote \/ Voodoo (20-1433)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pressure-gauge-0-100psi\"\u003eRadium Fuel Pressure Gauge 0–100 psi (20-0029)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-ford-mustang-2018\"\u003eRadium Mustang 2018+ Plumbing Kit, Microglass Filter (20-1817-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires a Radium 20-180X hanger. Pumps, rails and injectors not included (OEM injectors can be reused)\u003c\/li\u003e\n\u003cli\u003eNo pressure gauge is included\u003c\/li\u003e\n\u003cli\u003eManual cars: the clutch line bracket needs to be moved slightly to clear the filter inlet\u003c\/li\u003e\n\u003cli\u003eRadium doesn't state RHD fitment. Email us to confirm on Australian RHD cars before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang S550 2018–2023, all models\u003c\/li\u003e\n\u003cli\u003eFord Mustang S650 2024+, all models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765042741550,"sku":"20-1817-03","price":1924.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1817-XX.jpg?v=1792383956"},{"product_id":"radium-fuel-hanger-plumbing-kit-with-microglass-filter-ford-mustang-2015-2017","title":"Radium Fuel Hanger Plumbing Kit with Microglass Filter, Ford Mustang (2015-2017)","description":"\u003ch2\u003eRadium Fuel Hanger Plumbing Kit, Ford Mustang S550 (2015–2017), Microglass Filter\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang S550 2015–2017 incl. Shelby GT350 \/ GT500, with a Radium 20-180X hanger\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1816-05\u003c\/p\u003e\u003cp\u003eTurns a Radium-hangered early S550 into a full return-style fuel system, from the tank to the engine bay. It's what you want on a supercharged or E85 Coyote. New 8AN and 6AN PTFE lines replace the factory parts, with the long 8AN feed held in billet retainers under the car. A check-valve filter sits in a heat-shield bracket, and the OEM feed hard line becomes the return. These cars are port injection only, so the kit uses Radium's multi-port MPR regulator. The hanger's integrated FPR is blocked off with the included kit. The Radium hanger removes the in-tank fine filter, so this external filter is required. This version uses a 6 micron microglass element.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger, Mustang 2011+ (20-1800 \/ 20-1801 \/ 20-1802)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rails-ford-coyote-voodoo\"\u003eRadium Fuel Rails, Ford Coyote \/ Voodoo (20-1433)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pressure-gauge-0-100psi\"\u003eRadium Fuel Pressure Gauge 0–100 psi (20-0029)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-ford-mustang-2015-2017\"\u003eRadium Mustang 15–17 Plumbing Kit, Stainless Filter (20-1816-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires a Radium 20-180X hanger. Pumps, rails and injectors not included (OEM injectors can be reused)\u003c\/li\u003e\n\u003cli\u003eNo pressure gauge is included\u003c\/li\u003e\n\u003cli\u003eManual cars: the clutch line bracket needs to be moved slightly to clear the filter inlet\u003c\/li\u003e\n\u003cli\u003eRadium doesn't state RHD fitment. Email us to confirm on Australian RHD cars before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang S550 2015–2017, all models\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT \/ GTE \/ GT-H \/ GTS S550 2015–2016\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT350 S550 2015–2020\u003c\/li\u003e\n\u003cli\u003eFord Shelby GT500 S550 2020–2022\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765042905390,"sku":"20-1816-05","price":1679.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1816-XX_1200x800_2da8ffa6-7c5c-45ac-b9ff-6784f5a0c898.jpg?v=1792383956"},{"product_id":"radium-ford-sensor-adapter-8an-orb-16mm-bore-41mm-offset-spacing-m5","title":"Radium Ford Sensor Adapter, 8AN ORB, 16mm Bore, 41mm Offset Spacing, M5","description":"\u003ch2\u003eRadium Ford Fuel Pressure Sensor Adapter, 8AN ORB, 16mm Bore, 41mm Offset, M5\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford \/ Bosch fuel pressure sensors (16mm bore, 41mm offset spacing) on rails with an 8AN ORB port\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1303\u003c\/p\u003e\u003cp\u003eKeeps the factory Ford fuel pressure sensor working when you move to an aftermarket rail, so the ECU still sees fuel pressure. It suits earlier Fords that had a Bosch pressure sensor mounted on the factory rail. The billet adapter threads into any 8AN ORB (3\/4\"-16) port and the sensor bolts on with its factory M5 screws. It can go on any free port on the rail.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSensor not included. It reuses the factory M5 sensor screws\u003c\/li\u003e\n\u003cli\u003eYour sensor must have a 16mm bore and 41mm offset hole spacing\u003c\/li\u003e\n\u003cli\u003eThis sensor isn't common on Duratec \/ MZR engines, so check yours first\u003c\/li\u003e\n\u003cli\u003eCheck there's room around the rail port for the sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang 2005–2010 (sensor)\u003c\/li\u003e\n\u003cli\u003eFord Explorer 2004–2010, Focus 2005–2009, Escape 2005–2008 (sensor)\u003c\/li\u003e\n\u003cli\u003eFord F-150 2005–2008, F-250 \/ F-350 2005–2010 (sensor)\u003c\/li\u003e\n\u003cli\u003eShelby GT500 2011–2014 (sensor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065711918,"sku":"20-1303","price":60.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1303.jpg?v=1792384135"},{"product_id":"injector-dynamics-xds-injectors-60mm-14mm-top-8-cyl-set-holden-commodore-ls1-holden-monaro-ls1-ford-falcon-gt-gs-5-0-ford-f150-harley-davidson","title":"Injector Dynamics XDS Injectors – 60mm, 14mm Top, 8-Cyl Set | Holden Commodore LS1, Holden Monaro LS1, Ford Falcon GT\/GS 5.0, Ford F150 Harley-Davidson","description":"\u003ch2\u003eInjector Dynamics XDS Injectors, 8-Cyl Set – Holden Commodore LS1, Holden Monaro LS1, Ford Falcon GT\/GS 5.0, Ford F150 Harley-Davidson\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Holden Commodore VT II, VX and VY (LS1), Holden Monaro (LS1), Ford Falcon GT and GS 5.0 2010+, Ford F150 Harley-Davidson\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 1050.60.14.14.8 (ID1050X), 1300.60.14.14.8 (ID1300X), 1750.60.14.14.8 (ID1750X), 2600.60.14.14.8 (ID2600-XDS)\u003c\/p\u003e\u003cp\u003eSwitching to E85 or adding boost is usually what runs the factory injectors out of headroom. This flow-matched set of eight Injector Dynamics XDS injectors, 60mm body, 14mm top, is made to fit the Holden Commodore LS1, Holden Monaro LS1, Ford Falcon GT\/GS 5.0 and Ford F150 Harley-Davidson.\u003c\/p\u003e\u003cp\u003eChoose ID1050X, ID1300X, ID1750X or ID2600-XDS to match your power target. Every size shares the same fitment, so moving up later only means a tune change. They run on any known fuel including E85, are high impedance with a USCAR plug, and have a replaceable inlet filter.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn ECU tune is required. Your tuner will need the injector data for the size you choose\u003c\/li\u003e\n\u003cli\u003eAll Injector Dynamics injectors are high impedance. If your car runs low-impedance injectors with a resistor box, the resistor box must be bypassed\u003c\/li\u003e\n\u003cli\u003eHolden Commodore VZ and Monaro with the LS2 use the 48mm set. View the \u003ca href=\"\/products\/injector-dynamics-xds-injectors-48mm-14mm-top-8-cyl-set-holden-commodore-vz-ls2-holden-monaro-ls2\"\u003eHolden Commodore VZ LS2, Holden Monaro LS2\u003c\/a\u003e set\u003c\/li\u003e\n\u003cli\u003eThe Ford F150 5.0 2011+, Mustang GT 2011+ (including GT350) and Mustang GT500 2020+ use a different 60mm set. View the \u003ca href=\"\/products\/injector-dynamics-xds-injectors-60mm-14mm-top-8-cyl-set-ford-mustang-gt-gt350-gt500-ford-f150-5-0\"\u003eFord Mustang GT, GT350, GT500, Ford F150 5.0\u003c\/a\u003e set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolden Commodore VT II (LS1)\u003c\/li\u003e\n\u003cli\u003eHolden Commodore VX (LS1)\u003c\/li\u003e\n\u003cli\u003eHolden Commodore VY (LS1)\u003c\/li\u003e\n\u003cli\u003eHolden Monaro (LS1)\u003c\/li\u003e\n\u003cli\u003eFord Falcon GT and GS 5.0 2010+\u003c\/li\u003e\n\u003cli\u003eFord F150 Harley-Davidson\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Injector Dynamics, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure which set suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"ID1050X (1050cc)","offer_id":67765108015406,"sku":"1050.60.14.14.8","price":1774.0,"currency_code":"AUD","in_stock":true},{"title":"ID1300X (1300cc)","offer_id":67765108048174,"sku":"1300.60.14.14.8","price":3054.0,"currency_code":"AUD","in_stock":true},{"title":"ID1750X (1750cc)","offer_id":67765108080942,"sku":"1750.60.14.14.8","price":3924.0,"currency_code":"AUD","in_stock":true},{"title":"ID2600-XDS (2600cc)","offer_id":67765108113710,"sku":"2600.60.14.14.8","price":4664.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/1300.60.14.14.8.jpg?v=1792384375"},{"product_id":"injector-dynamics-xds-injectors-60mm-14mm-top-8-cyl-set-ford-mustang-gt-gt350-gt500-ford-f150-5-0","title":"Injector Dynamics XDS Injectors – 60mm, 14mm Top, 8-Cyl Set | Ford Mustang GT, GT350, GT500, Ford F150 5.0","description":"\u003ch2\u003eInjector Dynamics XDS Injectors, 8-Cyl Set – Ford Mustang GT, GT350, GT500, Ford F150 5.0\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Mustang GT 2011+ (including GT350), Ford Mustang GT500 2020+, Ford F150 5.0 2011+\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 1050.60.14.14B.8 (ID1050X), 1300.60.14.14B.8 (ID1300X), 1750.60.14.14B.8 (ID1750X), 2600.60.14.14B.8 (ID2600-XDS)\u003c\/p\u003e\u003cp\u003eSwitching to E85 or adding boost is usually what runs the factory injectors out of headroom. This flow-matched set of eight Injector Dynamics XDS injectors, 60mm body, 14mm top, is made to fit the Ford Mustang GT, GT350, GT500 and Ford F150 5.0.\u003c\/p\u003e\u003cp\u003eChoose ID1050X, ID1300X, ID1750X or ID2600-XDS to match your power target. Every size shares the same fitment, so moving up later only means a tune change. They run on any known fuel including E85, are high impedance with a USCAR plug, and have a replaceable inlet filter.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn ECU tune is required. Your tuner will need the injector data for the size you choose\u003c\/li\u003e\n\u003cli\u003eAll Injector Dynamics injectors are high impedance. If your car runs low-impedance injectors with a resistor box, the resistor box must be bypassed\u003c\/li\u003e\n\u003cli\u003eThe Ford Falcon GT and GS 5.0 2010+ and Ford F150 Harley-Davidson use a different 60mm set. View the \u003ca href=\"\/products\/injector-dynamics-xds-injectors-60mm-14mm-top-8-cyl-set-holden-commodore-ls1-holden-monaro-ls1-ford-falcon-gt-gs-5-0-ford-f150-harley-davidson\"\u003eHolden Commodore LS1, Holden Monaro LS1, Ford Falcon GT\/GS 5.0, Ford F150 Harley-Davidson\u003c\/a\u003e set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang GT 2011+ (includes GT350)\u003c\/li\u003e\n\u003cli\u003eFord Mustang GT500 2020+\u003c\/li\u003e\n\u003cli\u003eFord F150 5.0 2011+\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Injector Dynamics, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure which set suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"ID1050X (1050cc)","offer_id":67765108539694,"sku":"1050.60.14.14B.8","price":1774.0,"currency_code":"AUD","in_stock":true},{"title":"ID1300X (1300cc)","offer_id":67765108572462,"sku":"1300.60.14.14B.8","price":3054.0,"currency_code":"AUD","in_stock":true},{"title":"ID1750X (1750cc)","offer_id":67765108605230,"sku":"1750.60.14.14B.8","price":3924.0,"currency_code":"AUD","in_stock":true},{"title":"ID2600-XDS (2600cc)","offer_id":67765108637998,"sku":"2600.60.14.14B.8","price":4664.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/1300.60.14.14B.8.jpg?v=1792384376"},{"product_id":"injector-dynamics-xds-injectors-48mm-14mm-top-5-cyl-set-ford-focus-rs-mk2","title":"Injector Dynamics XDS Injectors – 48mm, 14mm Top, 5-Cyl Set | Ford Focus RS Mk2","description":"\u003ch2\u003eInjector Dynamics XDS Injectors, 5-Cyl Set – Ford Focus RS Mk2\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus RS Mk2 (2.5L 5-cylinder turbo)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 1050.48.14.14.5 (ID1050X), 1300.48.14.14.5 (ID1300X), 1750.48.14.14.5 (ID1750X), 2600.48.14.14.5 (ID2600-XDS)\u003c\/p\u003e\u003cp\u003eSwitching to E85 or adding boost is usually what runs the factory injectors out of headroom. This flow-matched set of five Injector Dynamics XDS injectors, 48mm body, 14mm top, is made to fit the Ford Focus RS Mk2.\u003c\/p\u003e\u003cp\u003eChoose ID1050X, ID1300X, ID1750X or ID2600-XDS to match your power target. Every size shares the same fitment, so moving up later only means a tune change. They run on any known fuel including E85, are high impedance with a USCAR plug, and have a replaceable inlet filter.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn ECU tune is required. Your tuner will need the injector data for the size you choose\u003c\/li\u003e\n\u003cli\u003eAll Injector Dynamics injectors are high impedance. If your car runs low-impedance injectors with a resistor box, the resistor box must be bypassed\u003c\/li\u003e\n\u003cli\u003eThis is a five-cylinder set. The four-cylinder Ford Focus RS Mk1 (2.0L) uses the 60mm, 14mm top 4-cyl set. View the \u003ca href=\"\/products\/injector-dynamics-xds-injectors-60mm-14mm-top-4-cyl-set-nissan-240sx-sr20det-bmw-e30-m3-ford-focus-rs-mk1\"\u003eNissan Silvia \/ SR20DET, BMW E30 M3, Ford Focus RS Mk1\u003c\/a\u003e set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFord Focus RS Mk2 – 2.5L 5-cylinder turbo\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Injector Dynamics, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure which set suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"ID1050X (1050cc)","offer_id":67765110112558,"sku":"1050.48.14.14.5","price":1099.0,"currency_code":"AUD","in_stock":true},{"title":"ID1300X (1300cc)","offer_id":67765110145326,"sku":"1300.48.14.14.5","price":1899.0,"currency_code":"AUD","in_stock":true},{"title":"ID1750X (1750cc)","offer_id":67765110178094,"sku":"1750.48.14.14.5","price":2444.0,"currency_code":"AUD","in_stock":true},{"title":"ID2600-XDS (2600cc)","offer_id":67765110210862,"sku":"2600.48.14.14.5","price":2909.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/xxxx.48.14.14.5-1024x1024.png?v=1792384375"},{"product_id":"injector-dynamics-xds-injectors-60mm-14mm-top-6-cyl-set-ford-falcon-xr6-turbo-ba-bf-vw-vr6-12v","title":"Injector Dynamics XDS Injectors – 60mm, 14mm Top, 6-Cyl Set | Ford Falcon XR6 Turbo BA\/BF, VW VR6 12v","description":"\u003ch2\u003eInjector Dynamics XDS Injectors, 6-Cyl Set – Ford Falcon XR6 Turbo BA\/BF, VW VR6 12v\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Falcon XR6 Turbo BA and BF, Volkswagen VR6 (12v)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 1050.60.14.14B.6 (ID1050X), 1300.60.14.14B.6 (ID1300X), 1750.60.14.14B.6 (ID1750X), 2600.60.14.14B.6 (ID2600-XDS)\u003c\/p\u003e\u003cp\u003eSwitching to E85 or adding boost is usually what runs the factory injectors out of headroom. This flow-matched set of six Injector Dynamics XDS injectors, 60mm body, 14mm top, is made to fit the Ford Falcon XR6 Turbo BA\/BF and VW VR6 12v.\u003c\/p\u003e\u003cp\u003eChoose ID1050X, ID1300X, ID1750X or ID2600-XDS to match your power target. Every size shares the same fitment, so moving up later only means a tune change. They run on any known fuel including E85, are high impedance with a USCAR plug, and have a replaceable inlet filter.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn ECU tune is required. Your tuner will need the injector data for the size you choose\u003c\/li\u003e\n\u003cli\u003eAll Injector Dynamics injectors are high impedance. If your car runs low-impedance injectors with a resistor box, the resistor box must be bypassed\u003c\/li\u003e\n\u003cli\u003eThe Ford Falcon XR6 Turbo FG uses a different set. View the \u003ca href=\"\/products\/injector-dynamics-xds-injectors-48mm-14mm-top-6-cyl-set-ford-falcon-xr6-turbo-fg-bmw-b58\"\u003eFord Falcon XR6 Turbo FG, BMW B58\u003c\/a\u003e set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Falcon XR6 Turbo BA and BF\u003c\/li\u003e\n\u003cli\u003eVolkswagen VR6 (12v)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Injector Dynamics, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure which set suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"ID1050X (1050cc)","offer_id":67765110505774,"sku":"1050.60.14.14B.6","price":1334.0,"currency_code":"AUD","in_stock":true},{"title":"ID1300X (1300cc)","offer_id":67765110538542,"sku":"1300.60.14.14B.6","price":2294.0,"currency_code":"AUD","in_stock":true},{"title":"ID1750X (1750cc)","offer_id":67765110571310,"sku":"1750.60.14.14B.6","price":2949.0,"currency_code":"AUD","in_stock":true},{"title":"ID2600-XDS (2600cc)","offer_id":67765110604078,"sku":"2600.60.14.14B.6","price":3504.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/1300.60.14.14B.6.jpg?v=1792384376"},{"product_id":"injector-dynamics-xds-injectors-60mm-14mm-top-4-cyl-set-nissan-240sx-sr20det-bmw-e30-m3-ford-focus-rs-mk1","title":"Injector Dynamics XDS Injectors – 60mm, 14mm Top, 4-Cyl Set | Nissan 240SX \/ SR20DET, BMW E30 M3, Ford Focus RS Mk1","description":"\u003ch2\u003eInjector Dynamics XDS Injectors, 4-Cyl Set – Nissan Silvia \/ SR20DET, BMW E30 M3, Ford Focus RS Mk1\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia \/ 180SX \/ 200SX (S13 \/ S14 \/ S15) (14mm top), Nissan SR20DET FWD (14mm top), BMW E30 M3 1988–1991, Ford Focus RS Mk1\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 1050.60.14.14.4 (ID1050X), 1300.60.14.14.4 (ID1300X), 1750.60.14.14.4 (ID1750X), 2600.60.14.14.4 (ID2600-XDS)\u003c\/p\u003e\u003cp\u003eSwitching to E85 or adding boost is usually what runs the factory injectors out of headroom. This flow-matched set of four Injector Dynamics XDS injectors, 60mm body, 14mm top, is made to fit the Nissan Silvia \/ SR20DET, BMW E30 M3 and Ford Focus RS Mk1.\u003c\/p\u003e\u003cp\u003eChoose ID1050X, ID1300X, ID1750X or ID2600-XDS to match your power target. Every size shares the same fitment, so moving up later only means a tune change. They run on any known fuel including E85, are high impedance with a USCAR plug, and have a replaceable inlet filter.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn ECU tune is required. Your tuner will need the injector data for the size you choose\u003c\/li\u003e\n\u003cli\u003eAll Injector Dynamics injectors are high impedance. If your car runs low-impedance injectors with a resistor box, the resistor box must be bypassed\u003c\/li\u003e\n\u003cli\u003eNissan Silvia \/ 180SX \/ 200SX (S13 \/ S14 \/ S15) and SR20DET FWD are offered in 11mm and 14mm injector top versions. This is the 14mm top set. For the 11mm top, view the \u003ca href=\"\/products\/injector-dynamics-xds-injectors-60mm-11mm-top-4-cyl-set-honda-civic-prelude-integra-nissan-240sx-sr20det\"\u003eHonda Civic, Prelude, Integra, Nissan Silvia \/ SR20DET\u003c\/a\u003e set\u003c\/li\u003e\n\u003cli\u003eThe Focus RS Mk2 (2.5L 5-cylinder) uses the Focus RS 5-cyl set. View the \u003ca href=\"\/products\/injector-dynamics-xds-injectors-48mm-14mm-top-5-cyl-set-ford-focus-rs-mk2\"\u003eFord Focus RS Mk2\u003c\/a\u003e set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW E30 M3 1988–1991\u003c\/li\u003e\n\u003cli\u003eFord Focus RS Mk1 – 2.0L 4-cylinder turbo\u003c\/li\u003e\n\u003cli\u003eNissan Silvia \/ 180SX \/ 200SX (S13 \/ S14 \/ S15) – 14mm injector top\u003c\/li\u003e\n\u003cli\u003eNissan SR20DET FWD – 14mm injector top\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Injector Dynamics, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure which set suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"ID1050X (1050cc)","offer_id":67765112078638,"sku":"1050.60.14.14.4","price":899.0,"currency_code":"AUD","in_stock":true},{"title":"ID1300X (1300cc)","offer_id":67765112111406,"sku":"1300.60.14.14.4","price":1539.0,"currency_code":"AUD","in_stock":true},{"title":"ID1750X (1750cc)","offer_id":67765112144174,"sku":"1750.60.14.14.4","price":1974.0,"currency_code":"AUD","in_stock":true},{"title":"ID2600-XDS (2600cc)","offer_id":67765112176942,"sku":"2600.60.14.14.4","price":2344.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/1300.60.14.14.4.jpg?v=1792384378"},{"product_id":"injector-dynamics-xds-injectors-48mm-14mm-top-6-cyl-set-ford-falcon-xr6-turbo-fg-bmw-b58","title":"Injector Dynamics XDS Injectors – 48mm, 14mm Top, 6-Cyl Set | Ford Falcon XR6 Turbo FG, BMW B58","description":"\u003ch2\u003eInjector Dynamics XDS Injectors, 6-Cyl Set – Ford Falcon XR6 Turbo FG, BMW B58\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Falcon XR6 Turbo (FG), BMW B58\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 1050.48.14.14B.6 (ID1050X), 1300.48.14.14B.6 (ID1300X), 1750.48.14.14B.6 (ID1750X), 2600.48.14.14B.6 (ID2600-XDS)\u003c\/p\u003e\u003cp\u003eSwitching to E85 or adding boost is usually what runs the factory injectors out of headroom. This flow-matched set of six Injector Dynamics XDS injectors, 48mm body, 14mm top, is made to fit the Ford Falcon XR6 Turbo FG and BMW B58.\u003c\/p\u003e\u003cp\u003eChoose ID1050X, ID1300X, ID1750X or ID2600-XDS to match your power target. Every size shares the same fitment, so moving up later only means a tune change. They run on any known fuel including E85, are high impedance with a USCAR plug, and have a replaceable inlet filter.\u003c\/p\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn ECU tune is required. Your tuner will need the injector data for the size you choose\u003c\/li\u003e\n\u003cli\u003eAll Injector Dynamics injectors are high impedance. If your car runs low-impedance injectors with a resistor box, the resistor box must be bypassed\u003c\/li\u003e\n\u003cli\u003eFord Falcon XR6 Turbo BA and BF use a different set. View the \u003ca href=\"\/products\/injector-dynamics-xds-injectors-60mm-14mm-top-6-cyl-set-ford-falcon-xr6-turbo-ba-bf-vw-vr6-12v\"\u003eFord Falcon XR6 Turbo BA\/BF, VW VR6 12v\u003c\/a\u003e set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Falcon XR6 Turbo (FG)\u003c\/li\u003e\n\u003cli\u003eBMW B58\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Injector Dynamics, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure which set suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"ID1050X (1050cc)","offer_id":67765112209710,"sku":"1050.48.14.14B.6","price":1334.0,"currency_code":"AUD","in_stock":true},{"title":"ID1300X (1300cc)","offer_id":67765112242478,"sku":"1300.48.14.14B.6","price":2294.0,"currency_code":"AUD","in_stock":true},{"title":"ID1750X (1750cc)","offer_id":67765112275246,"sku":"1750.48.14.14B.6","price":2949.0,"currency_code":"AUD","in_stock":true},{"title":"ID2600-XDS (2600cc)","offer_id":67765112308014,"sku":"2600.48.14.14B.6","price":3504.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/1050.48.14.14B.6.jpg?v=1792384378"},{"product_id":"radium-fuel-rails-suit-coyote-v8-ford-mustang-gt-15-21-fpv-fg-10-14-xr8-fgx-14-16","title":"Radium Fuel Rails Suit Coyote V8 - Ford Mustang GT 15-21\/FPV FG 10-14\/XR8 FGX 14-16","description":"\u003ch2\u003eRadium Fuel Rails – Ford Coyote V8 (Mustang GT \/ FPV FG \/ FG X XR8)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford 5.0L Coyote-based V8 – FPV FG 2010–2014, Falcon FG X XR8 2014–2016, Mustang GT 2015–2021\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0433\u003c\/p\u003e\u003cp\u003eThe supercharged 5.0 in the FPV GT and FG X XR8, and the S550 Mustang GT, all respond strongly to more boost and E85 – but the factory rails soon limit fuel delivery. These billet rails improve fuel distribution across all eight cylinders and add ports for proper feed, return and accessory plumbing, for street, track or drag builds.\u003c\/p\u003e\u003cp\u003eThey bolt straight on with no modifications, take OEM or aftermarket injectors, and are anodised for corrosion resistance and E85 compatibility.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-v2-fpd-r-fuel-pulse-damper-8an-orb\"\u003eRadium V2 FPD-R Fuel Pulse Damper, 8AN ORB\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor 2011–2023 Mustang GT, GT350 and F-150, also see the \u003ca href=\"\/products\/radium-fuel-rails-ford-coyote-voodoo\"\u003eCoyote \/ Voodoo rails (20-1433)\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFittings and injectors are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFPV FG GT \/ GT-P \/ GS \/ Pursuit 2010–2014 (5.0L supercharged)\u003c\/li\u003e\n\u003cli\u003eFord Falcon FG X XR8 2014–2016 (5.0L supercharged)\u003c\/li\u003e\n\u003cli\u003eFord Mustang GT 2015–2021 (5.0L Coyote)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email sales@radiumengineering.com.au and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Default Title","offer_id":67861372141870,"sku":"20-0433","price":355.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0433_9be0d5ae-9db4-4473-865c-d511efd9c0c0.jpg?v=1793158492"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/collections\/11.png?v=1783389841","url":"https:\/\/radiumengineering.com.au\/collections\/shop-by-ford.oembed?page=3","provider":"Radium Engineering Australia","version":"1.0","type":"link"}