{"title":"Fuel Surge Tanks\/ Hangers","description":"","products":[{"product_id":"radium-duckbill-valve","title":"Radium Duckbill Valve","description":"\u003ch2\u003eRadium Duckbill Valve\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Any 3\/8in (10mm) hose barb – in-tank return hoses, venturi jet pumps and surge tanks\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 18-0026\u003c\/p\u003e\n\u003cp\u003eA small fluorosilicone one-way valve that sits on the end of an in-tank return hose. It stops fuel draining back out of the hose, cuts down aeration and return slosh noise, and adds a bit of fire safety if a line is ever disturbed.\u003c\/p\u003e\n\u003cp\u003eOn venturi jet pump setups it does an extra job: it keeps air out of the vacuum chamber, so the siphon keeps pulling fuel across a saddle tank instead of sucking air. A cheap, worthwhile part on any hanger or surge tank build, including street E85 cars.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-venturi-jet-pump-kit\"\u003eRadium Venturi Jet Pump Kit (20-0180)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFit the valve low on the end of the barb – if the barb pushes too far in, it can hold the valve open.\u003c\/li\u003e\n\u003cli\u003eSecure it with the supplied zip tie.\u003c\/li\u003e\n\u003cli\u003eVery low opening pressure (0–1 kPa), so it won't add restriction to the return.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal – any 3\/8in (10mm) hose barb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764920189230,"sku":"18-0026","price":26.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/18-0026.jpg?v=1792383210"},{"product_id":"radium-mpfst-o-ring-service-kit","title":"Radium MPFST O-ring Service Kit","description":"\u003ch2\u003eRadium MPFST O-Ring Service Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium 6in (152mm) diameter surge tanks – MPFST, MPFST-R, HVFST and FST for External Pumps\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0088\u003c\/p\u003e\n\u003cp\u003eLid seals harden and take a set over time, especially after years on E85 or once a tank has been opened for a pump change. This kit has the two large genuine Radium lid seals needed to reseal the top and bottom caps of a 6in multi-pump or high-volume surge tank, so it goes back together leak-free.\u003c\/p\u003e\n\u003cp\u003eWorth having on the shelf any time you service the pumps in an MPFST.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-mpfst-r-multi-pump-fuel-surge-tank-built-in-regulator\"\u003eRadium MPFST-R Multi-Pump Fuel Surge Tank (20-1445)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot for Radium standard 4in surge tanks – they use the \u003ca href=\"\/products\/radium-o-ring-service-kit-standard-fst\"\u003eStandard FST O-Ring Service Kit (20-0087)\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadium MPFST\u003c\/li\u003e\n\u003cli\u003eRadium MPFST-R\u003c\/li\u003e\n\u003cli\u003eRadium HVFST (discontinued)\u003c\/li\u003e\n\u003cli\u003eRadium FST for External Pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764920516910,"sku":"20-0088","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0088.jpg?v=1792383210"},{"product_id":"radium-venturi-jet-pump-kit","title":"Radium Venturi Jet Pump Kit","description":"\u003ch2\u003eRadium Venturi Jet Pump Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal – saddle-style fuel tanks (RWD and AWD) running high-flow aftermarket pumps\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0180\u003c\/p\u003e\n\u003cp\u003eSaddle tanks rely on a jet pump to move fuel from the far side of the tank across to the pump. Factory jet pumps are sized for factory pump flow. Add a big aftermarket pump and the OEM unit becomes a choke point in the return, pushing fuel pressure up, and drilling it out wrecks the siphon effect.\u003c\/p\u003e\n\u003cp\u003eRadium's billet jet pump is built around aftermarket flow rates, with three interchangeable inlet orifices that were vacuum-tested across a range of pump combinations. It's the fix when a pump upgrade on a saddle-tank car starts fighting the factory return, whether that's a street E85 car or a drift or time attack build that needs every drop of fuel picked up.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-duckbill-valve\"\u003eRadium Duckbill Valve (18-0026)\u003c\/a\u003e – fits straight onto the outlet barb in place of a submerged hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe OEM jet pump must be removed – the system won't work if fuel is still pushed through it.\u003c\/li\u003e\n\u003cli\u003eFit a hose (not included) to the 8.5mm outlet barb with its end submerged low in the tank, or use a duckbill valve, so the jet pump can't draw air back the other way.\u003c\/li\u003e\n\u003cli\u003eBarbs suit 5\/16in or 3\/8in ID hose. Rigid hose needs the smaller ID to seal.\u003c\/li\u003e\n\u003cli\u003eThe siphon port fitting can be swapped for any 6AN ORB fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal – saddle-style fuel tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764922024238,"sku":"20-0180","price":157.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0180_ca440b7c-d3fc-4a17-990d-8e694e541a48.jpg?v=1792383216"},{"product_id":"radium-o-ring-service-kit-standard-fst","title":"Radium O-Ring Service Kit, Standard FST","description":"\u003ch2\u003eRadium O-Ring Service Kit – Standard FST\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium standard 4in (102mm) diameter surge tanks – Single Pump FST, Dual Pump FST, External FST and FST-R\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0087\u003c\/p\u003e\n\u003cp\u003eEverything needed to reseal the top and bottom caps of a Radium standard 4in surge tank after a pump change or service. Early tanks sealed the top with a formed gasket, while later tanks use O-rings on the lid and the cap bolts.\u003c\/p\u003e\n\u003cp\u003eThis kit includes both styles, so you'll have the right seals whichever generation of tank you're working on.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-standard-single-pump-fst-fuel-surge-tank\"\u003eRadium Standard Single Pump FST (20-0960)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRefit the same seal type that came out of the tank – gasket and O-ring styles can't be swapped between generations.\u003c\/li\u003e\n\u003cli\u003eNot for Radium 6in multi-pump or high-volume tanks – they use the \u003ca href=\"\/products\/radium-mpfst-o-ring-service-kit\"\u003eMPFST O-Ring Service Kit (20-0088)\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadium Single Pump FST\u003c\/li\u003e\n\u003cli\u003eRadium Dual Pump FST (discontinued)\u003c\/li\u003e\n\u003cli\u003eRadium External FST (discontinued)\u003c\/li\u003e\n\u003cli\u003eRadium FST-R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764922286382,"sku":"20-0087","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0087.jpg?v=1792383219"},{"product_id":"radium-fuel-hanger-return-mitsubishi-evo-x","title":"Radium Fuel Hanger Return - Mitsubishi Evo X","description":"\u003ch2\u003eRadium Fuel Hanger Return Kit – Mitsubishi Evo X\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Mitsubishi Lancer Evolution X (2008–2015)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0249\u003c\/p\u003e\n\u003cp\u003eThe factory Evo X return hose is too restrictive for an upgraded return-style fuel system, and a restricted return stops the regulator from holding a steady base pressure. This kit converts the OEM feed line into the new return line and replaces the factory return hose altogether.\u003c\/p\u003e\n\u003cp\u003eA -6AN PTFE hose runs from a Radium direct mount regulator in the top port of a Radium fuel rail, and SAE quick connects join it to each end of the OEM line. It's a tidy, E85-safe way to get proper return flow on a built Evo X, whether it's a street car or a time attack build.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dmr-ra-direct-mount-fuel-pressure-regulator\"\u003eRadium DMR-RA Direct Mount Fuel Pressure Regulator (20-1623)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-mitsubishi-evo-x\"\u003eRadium Fuel Pump Hanger – Mitsubishi Evo X\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for a Radium direct mount regulator fitted in the top port of a Radium fuel rail. The regulator is not included.\u003c\/li\u003e\n\u003cli\u003eInstallation is covered in the Radium Evo X fuel pump hanger instructions (steps 44–45).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution X (2008–2015)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764922384686,"sku":"20-0249","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0249.jpg?v=1792383218"},{"product_id":"radium-fuel-surge-tank-install-kit-mitsubishi-evo-7-9","title":"Radium Fuel Surge Tank Install Kit - Mitsubishi Evo 7-9","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Mitsubishi Evo VIII \/ IX\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Mitsubishi Lancer Evolution VIII and IX (CT9A)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0120\u003c\/p\u003e\n\u003cp\u003eEvos are known for fuel starvation under hard cornering once the tank gets below half, which is exactly when a lean cylinder ends a time attack session or a track day. This kit installs a Radium single pump fuel surge tank in the boot, centred behind the rear seat in a collision-safe spot, so the engine is fed from a full surge tank whatever the main tank is doing.\u003c\/p\u003e\n\u003cp\u003eThe aluminium bracket mounts to the V-brace in front of the rear seat carpet cover, and the tank is isolated through the carpet cover to keep pump noise and vibration down. Most of the boot stays usable, and the solder-free wiring goes together in under 30 minutes.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-standard-single-pump-fst-fuel-surge-tank\"\u003eRadium Standard Single Pump FST (20-0960)\u003c\/a\u003e – the surge tank this kit installs (required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe surge tank and surge tank pump are sold separately.\u003c\/li\u003e\n\u003cli\u003eNot designed for the Radium MPFST.\u003c\/li\u003e\n\u003cli\u003eRadium lists this kit for the Evo VIII and IX. If you have an Evo VII, email us before ordering.\u003c\/li\u003e\n\u003cli\u003eSlightly higher static fuel pressure is normal with a high-flow pump because of the OEM return port restriction. The instructions cover modifying the OEM jet pump to improve return flow.\u003c\/li\u003e\n\u003cli\u003eYou may need a main tank pump upgrade. As a guide, the main tank pump should flow about 40–50% of the surge tank pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VIII (CT9A)\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution IX (CT9A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764922876206,"sku":"20-0120","price":646.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0120_44f3fec3-530b-4f94-9585-ac35487b18d5.jpg?v=1792383226"},{"product_id":"radium-fuel-surge-tank-install-kit-mitsubishi-evo-x","title":"Radium Fuel Surge Tank Install Kit - Mitsubishi Evo X","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Mitsubishi Evo X\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Mitsubishi Lancer Evolution X (2008–2015), excluding RHD cars with the OEM washer reservoir in the mounting location\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0113\u003c\/p\u003e\n\u003cp\u003eA built Evo X will starve for fuel in long corners on a low tank, and that's usually when the damage is done. This kit fits a Radium single pump fuel surge tank behind the rear seat, in front of the boot trim panel, so the engine always draws from a full surge tank.\u003c\/p\u003e\n\u003cp\u003eThe powder-coated aluminium bracket bolts to the factory mounting bosses with no drilling or cutting, the trim panel goes back in, and you keep all of your usable boot space. The pre-assembled, cut-to-length 6AN PTFE hoses connect to the OEM lines, won't let fuel smell into the cabin, and are fine with E85. The solder-free wiring takes under 30 minutes.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-standard-single-pump-fst-fuel-surge-tank\"\u003eRadium Standard Single Pump FST (20-0960)\u003c\/a\u003e – the surge tank this kit installs (required)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fuel-pump-hanger-mitsubishi-evo-x\"\u003eRadium Fuel Pump Hanger – Mitsubishi Evo X\u003c\/a\u003e – removes the OEM return restriction and adds a higher-flowing jet pump\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-return-mitsubishi-evo-x\"\u003eRadium Fuel Hanger Return Kit – Evo X (20-0249)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe surge tank and fuel pump are not included.\u003c\/li\u003e\n\u003cli\u003eCheck your car first: it won't fit RHD models that have the factory washer reservoir in the mounting location.\u003c\/li\u003e\n\u003cli\u003ePlumbing and wiring are for a single pump. A dual-pump tank needs a Radium DIY harness and a second hose to the fuel rail.\u003c\/li\u003e\n\u003cli\u003eWith a Radium FST-R, the kit reuses the OEM regulator. One hose isn't used, the OEM 1\/4in regulator return hose must be removed, drained or plugged, and the regulator vacuum line has to be extended to the boot.\u003c\/li\u003e\n\u003cli\u003eSlightly higher static fuel pressure is normal with a high-flow pump because of the restrictive OEM return port. The instructions show how to enlarge it.\u003c\/li\u003e\n\u003cli\u003eYou may need a main tank pump upgrade. As a guide, the main tank pump should flow about 40–50% of the surge tank pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution X (2008–2015) – except RHD cars with the washer reservoir in the mounting location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764922974510,"sku":"20-0113","price":646.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0113_4307668d-d317-4763-af1c-b016ed09574a.jpg?v=1792383226"},{"product_id":"radium-fuel-level-switch-1-8-npt","title":"Radium Fuel Level Switch, 1\/8\" NPT","description":"\u003ch2\u003eRadium Fuel Level Switch – 1\/8in NPT\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Any fuel container with a 1\/8in NPT port, including Radium FST, MPFST, MPFST-R, FCST and FCST-X surge tanks\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0461\u003c\/p\u003e\n\u003cp\u003eA surge tank only protects the engine while it's got fuel in it. This stainless float switch threads into a 1\/8in NPT port inside the tank and gives you a switched signal when the level drops, so you know before the engine does.\u003c\/p\u003e\n\u003cp\u003eUse it to light a dash warning, feed a programmable ECU input for engine protection, or switch a lift pump on and off. It's a smart addition on endurance, time attack and drag cars where running a tank low is part of the plan.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-diagnostic-indicator\"\u003eRadium Fuel Level Diagnostic Indicator (20-0508)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-switch-plus-diagnostic-indicator\"\u003eRadium Fuel Level Switch Plus Diagnostic Indicator kit (20-0519)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe switch has to be installed inside the fuel container.\u003c\/li\u003e\n\u003cli\u003eBench test the signal direction before fitting. You can reverse it by removing the E-clip and flipping the float.\u003c\/li\u003e\n\u003cli\u003eUse PTFE thread sealant paste on the tapered pipe thread.\u003c\/li\u003e\n\u003cli\u003eFor Radium FST and Standard FST tanks, only current versions have the switch port. Look for it on top of the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadium FST and Standard FST (current versions with level switch port)\u003c\/li\u003e\n\u003cli\u003eRadium MPFST and MPFST-R\u003c\/li\u003e\n\u003cli\u003eRadium FCST and FCST-X\u003c\/li\u003e\n\u003cli\u003eUniversal – any fuel container with a 1\/8in NPT port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764928872750,"sku":"20-0461","price":157.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0461.jpg?v=1792383273"},{"product_id":"radium-fuel-hanger-fpr-block-off-plate-ford-mustang-s197-s550-11","title":"Radium Fuel Hanger FPR Block Off Plate - Ford Mustang S197\/S550 11+","description":"\u003ch2\u003eRadium Fuel Hanger FPR Block-Off Kit – Ford Mustang 2011+\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium 2011+ Ford Mustang \/ Shelby fuel pump hangers (20-1800, 20-1801, 20-1802)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0806\u003c\/p\u003e\n\u003cp\u003eThe Radium Mustang hanger ships as a returnless (dead-head) system with a built-in regulator. This kit blocks that regulator off and turns the hanger into a return-style system, so you can run an external regulator and send the return back to the tank through the port on the hanger top plate.\u003c\/p\u003e\n\u003cp\u003eIt's the way to go once a Coyote build moves past what the built-in regulator handles, or when you want to tune base pressure on E85.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-2011-ford-mustang-shelby\"\u003eRadium Fuel Pump Hanger – 2011+ Ford Mustang \/ Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dmr-ra-direct-mount-fuel-pressure-regulator\"\u003eRadium DMR-RA Direct Mount Fuel Pressure Regulator (20-1623)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYou'll need a 6AN ORB fitting (sold separately) on the return port. If you're keeping the rear seat, it has to be low profile.\u003c\/li\u003e\n\u003cli\u003eAn external fuel pressure regulator (not included) must be fitted downstream. That part isn't covered in the instructions.\u003c\/li\u003e\n\u003cli\u003eThis kit is already included in the Radium Mustang fuel hanger plumbing kits (20-1816 and 20-1817).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Mustang \/ Shelby 2011+ (S197, S550, S650) with Radium hanger 20-1800, 20-1801 or 20-1802\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764930445614,"sku":"20-0806","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0806.jpg?v=1792383275"},{"product_id":"radium-fuel-surge-tank-mounting-bracket-universal-angled-mount","title":"Radium Fuel Surge Tank Mounting Bracket - Universal Angled Mount","description":"\u003ch2\u003eRadium Fuel Surge Tank Mounting Bracket – Universal Angled Mount\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium fuel surge tanks in cars with limited mounting height\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 13-0029\u003c\/p\u003e\n\u003cp\u003eNot every boot or engine bay has the vertical room to stand a surge tank upright. This angled bracket lets you mount a Radium surge tank to the floor and against a wall at the same time, which opens up tight spots that a flat bracket can't use.\u003c\/p\u003e\n\u003cp\u003eIt's laser cut from aluminium and finished in black powder coat, and suits anything from a street car boot install to a stripped-out race car.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-standard-single-pump-fst-fuel-surge-tank\"\u003eRadium Standard Single Pump FST (20-0960)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-mpfst-r-multi-pump-fuel-surge-tank-built-in-regulator\"\u003eRadium MPFST-R Multi-Pump Fuel Surge Tank (20-1445)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBracket only. The surge tank and mounting fasteners to the car are not included.\u003c\/li\u003e\n\u003cli\u003eIf you're unsure whether it suits your tank, email us with the surge tank part number.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal – Radium fuel surge tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764930773294,"sku":"13-0029","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/13-0029.jpg?v=1792383279"},{"product_id":"radium-denso-fuel-level-sending-adapter","title":"Radium Denso Fuel Level Sending Adapter","description":"\u003ch2\u003eRadium Denso Fuel Level Sender Adapter\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Mitsubishi Evo X, Toyota 86 \/ GR86, Subaru BRZ, Subaru WRX (2015–2021) and other cars using the same Denso level sender\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0350\u003c\/p\u003e\n\u003cp\u003eMoving to an aftermarket hanger or surge tank shouldn't mean losing your fuel gauge. This adapter mounts the factory Denso level sender to a flat surface, such as a Radium hanger or surge tank, so the OEM gauge keeps working. The sender simply slides down onto the adapter until a tab locks it in place.\u003c\/p\u003e\n\u003cp\u003eSeveral mounting holes let you set the float height to suit your tank, and there's provision to secure the OEM fuel temperature sensor. Machined from 6061 aluminium and black anodised.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-mitsubishi-evo-x\"\u003eRadium Fuel Pump Hanger – Mitsubishi Evo X\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Denso fuel level sender is not included.\u003c\/li\u003e\n\u003cli\u003eIt may suit other cars. Check your actual sender against the photos before ordering.\u003c\/li\u003e\n\u003cli\u003eFor 2015–2021 WRX pump hangers, Radium recommends the \u003ca href=\"\/products\/radium-fuel-level-sensor-adaptor-subaru-wrx-va-forester-xt-sj\"\u003eWRX VA \/ Forester XT SJ adapter (20-0850)\u003c\/a\u003e instead, as it includes extra parts you'll need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution X\u003c\/li\u003e\n\u003cli\u003eToyota 86 (ZN6) and GR86 (ZN8)\u003c\/li\u003e\n\u003cli\u003eSubaru BRZ (ZC6)\u003c\/li\u003e\n\u003cli\u003eSubaru WRX (2015–2021) – see Good to Know\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764931428654,"sku":"20-0350","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0350_33b1b38d-f775-480a-a138-3d335143333b.jpg?v=1792383282"},{"product_id":"radium-fuel-level-switch-plus-diagnostic-indicator","title":"Radium Fuel Level Switch Plus Diagnostic Indicator","description":"\u003ch2\u003eRadium Fuel Level Switch Plus Diagnostic Indicator Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Any fuel container with a 1\/8in NPT port and a 2AN ORB port, including Radium FST, MPFST, MPFST-R, FCST and FCST-X surge tanks\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0519\u003c\/p\u003e\n\u003cp\u003eThis kit pairs the Radium 1\/8in NPT fuel level switch (20-0461) with the LED diagnostic indicator (20-0508). The stainless switch sits inside the tank and gives a switched signal when the level drops, which you can use for a dash warning, an ECU engine protection input or lift pump control.\u003c\/p\u003e\n\u003cp\u003eThe LED mounts in a 2AN ORB port and shows you at a glance what the switch is doing. It's mainly a diagnostic tool: when you're chasing a fuelling problem on the dyno or in the pits, it tells you straight away whether the surge tank is staying full.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-mpfst-r-multi-pump-fuel-surge-tank-built-in-regulator\"\u003eRadium MPFST-R Multi-Pump Fuel Surge Tank (20-1445)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-fuel-cell-surge-tank\"\u003eRadium FCST-X Fuel Cell Surge Tank\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe switch has to be installed inside the fuel container.\u003c\/li\u003e\n\u003cli\u003eBench test the signal direction first. You can reverse it by removing the E-clip and flipping the float.\u003c\/li\u003e\n\u003cli\u003eNeeds a 1\/8in NPT port for the switch and a 2AN ORB (5\/16in-24) port for the LED.\u003c\/li\u003e\n\u003cli\u003eIf you stack the LED on the level switch, the panel must be at least 19mm (0.75in) thick.\u003c\/li\u003e\n\u003cli\u003eSoldering is required to install the LED.\u003c\/li\u003e\n\u003cli\u003eUse PTFE thread sealant paste on the tapered pipe thread.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadium FST and Standard FST (current versions with level switch port)\u003c\/li\u003e\n\u003cli\u003eRadium MPFST and MPFST-R\u003c\/li\u003e\n\u003cli\u003eRadium FCST and FCST-X\u003c\/li\u003e\n\u003cli\u003eUniversal – any suitable fuel container\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764931494190,"sku":"20-0519","price":192.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0519_20c0c2d8-2d45-43d0-a5fe-107d965bec23.jpg?v=1792383282"},{"product_id":"radium-fuel-tank-pressure-sensor-plug-mitsubishi-evo-x","title":"Radium Fuel Tank Pressure Sensor Plug - Mitsubishi Evo X","description":"\u003ch2\u003eRadium Fuel Tank Pressure Sensor Plug – Mitsubishi Evo X\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Mitsubishi Lancer Evolution X (2008–2015) with a Radium fuel pump hanger\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0421\u003c\/p\u003e\n\u003cp\u003eMany Evo X models sold outside North America, including Australian-delivered cars, didn't come with the OEM fuel tank pressure sensor (Mitsubishi 8651A025) on the pump hanger. If your car doesn't use one, this plug seals that port on the Radium Evo X hanger.\u003c\/p\u003e\n\u003cp\u003eIt's green anodised aluminium, seals with an O-ring, and is held in with the two button-head bolts supplied with the hanger.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-mitsubishi-evo-x\"\u003eRadium Fuel Pump Hanger – Mitsubishi Evo X\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOnly for the Radium Evo X fuel pump hanger.\u003c\/li\u003e\n\u003cli\u003eUses the two button-head bolts supplied with the hanger (not included here).\u003c\/li\u003e\n\u003cli\u003eNot needed if your car has the OEM tank pressure sensor (8651A025). Check your factory hanger if you're unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution X (2008–2015) without the OEM fuel tank pressure sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764932477230,"sku":"20-0421","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0421.jpg?v=1792383289"},{"product_id":"radium-fuel-surge-tank-frame-rail-mount-kit-lotus-elise-exige","title":"Radium Fuel Surge Tank Frame Rail Mount Kit - Lotus Elise\/Exige","description":"\u003ch2\u003eRadium Fuel Surge Tank Frame Rail Mount Kit – Lotus Elise \/ Exige 2ZZ-GE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Lotus Elise and Exige 2ZZ-GE (2004+), normally aspirated and supercharged\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0013\u003c\/p\u003e\n\u003cp\u003eElises and Exiges pull serious lateral g on track, and the factory tank can't keep the pump covered once it's below half. This kit installs a Radium FST-R surge tank with a single 39mm pump on the right-hand side of the car, either on the frame rail in the engine bay near the alternator or in the boot.\u003c\/p\u003e\n\u003cp\u003eIt's built around the FST-R with its integrated regulator, so no external regulator is needed. All the factory fuel lines are replaced with -6AN stainless braided PTFE hose with a black PVC cover, which is safe on E85 and works with the OEM fuel rail or a Radium fuel rail. A plug-and-play harness handles the pump trigger.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fstr-ra-fuel-surge-tank-w-integrated-fpr-fuel-pressure-regulator\"\u003eRadium FST-R RA Fuel Surge Tank with Integrated Regulator (20-1933)\u003c\/a\u003e – the surge tank this kit is designed for\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe surge tank and pump are not included. Not compatible with the Radium MPFST.\u003c\/li\u003e\n\u003cli\u003eRadium developed this kit on US-market cars. Email us to confirm fitment on an Australian-delivered Elise or Exige.\u003c\/li\u003e\n\u003cli\u003eOn supercharged cars, Lotus moved the charcoal canister into the frame rail mounting area, so it has to be removed or relocated to use that location. Cup cars don't have a canister.\u003c\/li\u003e\n\u003cli\u003eThe frame rail mount works with A\/C-equipped cars and suits cars with a modular clamshell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLotus Elise 2ZZ-GE (2004+)\u003c\/li\u003e\n\u003cli\u003eLotus Exige 2ZZ-GE (2004+), including supercharged models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764939522350,"sku":"20-0013","price":873.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0013.jpg?v=1792383337"},{"product_id":"radium-fuel-pump-connector-harness-walbro-460-e85-porsche-911-turbo-996","title":"Radium Fuel Pump Connector Harness Walbro 460 E85 - Porsche 911 Turbo 996","description":"\u003ch2\u003eRadium Fuel Pump Connector Harness – Walbro 450\/460 E85 (Porsche Version)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Walbro (TI Automotive) F90000267, F90000274, F90000285 and F90000295 pumps in Radium hangers, surge tanks and FCST units\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 17-0054\u003c\/p\u003e\n\u003cp\u003eA 432mm (17in) replacement pump harness made from 14 AWG ETFE wire, which is safe to sit submerged in petrol, E85 and other common fuels. Use it to replace the harness in a Radium hanger, pump install kit, surge tank or FCST, or as a universal in-tank pump lead.\u003c\/p\u003e\n\u003cp\u003eRadium lists this as its Porsche Walbro version, built for 996 911 Turbo installs.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEmail us before ordering so we can confirm the connector suits your hanger or tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWalbro \/ TI Automotive F90000267 (416 lph)\u003c\/li\u003e\n\u003cli\u003eWalbro \/ TI Automotive F90000274 (416 lph)\u003c\/li\u003e\n\u003cli\u003eWalbro \/ TI Automotive F90000285 (450 lph)\u003c\/li\u003e\n\u003cli\u003eWalbro \/ TI Automotive F90000295 (537 lph)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764939653422,"sku":"17-0054","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/17-0054.jpg?v=1792383340"},{"product_id":"radium-fuel-pump-connector-harness-walbro-255-porsche-911-turbo-996","title":"Radium Fuel Pump Connector Harness Walbro 255 - Porsche 911 Turbo 996","description":"\u003ch2\u003eRadium Fuel Pump Connector Harness – Walbro 255 Style (Porsche Version)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Walbro GSS341 \/ GSS342, AEM 50-1000 \/ 50-1200 \/ 50-1220, Aeromotive 340 and DeatschWerks DW300-style pumps in Radium hangers, surge tanks and FCST units\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 17-0053\u003c\/p\u003e\n\u003cp\u003eA 584mm (23in) replacement pump harness made from 14 AWG ETFE wire, which is safe to sit submerged in petrol, E85 and other common fuels. Use it to replace the harness in a Radium hanger, pump install kit, surge tank or FCST, or as a universal in-tank lead for 255-style pumps.\u003c\/p\u003e\n\u003cp\u003eRadium lists this as its Porsche Walbro version, built for 996 911 Turbo installs.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEmail us before ordering so we can confirm the connector suits your hanger or tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWalbro GSS341 \/ GSS342 (255 lph)\u003c\/li\u003e\n\u003cli\u003eAEM 50-1000 (petrol), 50-1200 and 50-1220 (E85)\u003c\/li\u003e\n\u003cli\u003eAeromotive 340 Stealth 11141 \/ 11142\u003c\/li\u003e\n\u003cli\u003eDeatschWerks 9-301-1000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764940210478,"sku":"17-0053","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/17-0053.jpg?v=1792383342"},{"product_id":"radium-electrical-bulkhead-stud-kit-6-pack","title":"Radium Electrical Bulkhead Stud Kit, 6 Pack","description":"\u003ch2\u003eRadium Electrical Bulkhead Stud Kit – 6 Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Legacy Radium hangers and surge tanks without anti-rotation studs, plus custom fuel cell and panel installs\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 17-0048\u003c\/p\u003e\n\u003cp\u003eGetting pump power through a tank lid or fuel cell plate without leaks is harder than it looks. These hermetically sealed bulkhead studs pass up to 30A each through a panel and only need a drilled hole. The conductive studs are CNC machined from 304 stainless, and an insulating sleeve stops the stud shorting to the panel or causing galvanic corrosion.\u003c\/p\u003e\n\u003cp\u003eAnodised aluminium acorn nuts and heat shrink cover the exposed ends to guard against accidental shorts. Use them to update an older Radium hanger or surge tank, or on a custom fuel cell build.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrill a 5.59–5.94mm (0.220–0.234in) hole. A 15\/64in drill bit is right.\u003c\/li\u003e\n\u003cli\u003ePanel thickness must be 6.65–8.18mm (0.262–0.322in).\u003c\/li\u003e\n\u003cli\u003eEach stud uses two locking nuts on top.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLegacy Radium fuel pump hangers and surge tanks without the latest anti-rotation studs\u003c\/li\u003e\n\u003cli\u003eUniversal – custom fuel cells, tanks and panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764941685038,"sku":"17-0048","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/17-0048.jpg?v=1792383349"},{"product_id":"radium-fuel-cell-24-bolt-flange-gasket","title":"Radium Fuel Cell 24 Bolt Flange Gasket","description":"\u003ch2\u003eRadium Fuel Cell 24-Bolt Flange Gasket\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Industry-standard 6in x 10in 24-bolt fuel cell openings, including Radium RA-Series fuel cells, FCST and FCST-X\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 18-0015\u003c\/p\u003e\n\u003cp\u003eCork and paper fuel cell gaskets break down, especially on E85, and are usually ruined the first time the plate comes off. This one is die cut from premium FKM, so it resists fuel and can be reused when you service the cell.\u003c\/p\u003e\n\u003cp\u003eIt's 1\/16in thick and suits any standard 6in x 10in 24-bolt pattern, including every Radium fuel cell surge tank and RA-Series cell.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-nut-ring-black-anodized\"\u003eRadium Fuel Cell Nut Ring, Black Anodised (14-0584)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fuel-cell-24-bolt-weld-flange-with-gasket\"\u003eRadium Fuel Cell 24-Bolt Weld Flange with Gasket (20-0278)\u003c\/a\u003e – for custom fabricated aluminium cells\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-fuel-cell-surge-tank\"\u003eRadium FCST-X Fuel Cell Surge Tank\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGasket only. Nut ring, plate and bolts are sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny fuel cell with a 6in x 10in 24-bolt pattern\u003c\/li\u003e\n\u003cli\u003eRadium RA-Series fuel cells\u003c\/li\u003e\n\u003cli\u003eRadium FCST and FCST-X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764942864686,"sku":"18-0015","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/18-0015_adf755c4-e3fa-4bce-8cee-57dd2cd0dbef.jpg?v=1792383356"},{"product_id":"radium-turbo-fuel-cell-surge-tank-install-kit-fst-not-included-porsche-996","title":"Radium Turbo Fuel Cell Surge Tank Install Kit (FST Not Included) - Porsche 996","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Porsche 911 Turbo 996\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Porsche 911 Turbo (996)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0288\u003c\/p\u003e\n\u003cp\u003eOnce a 996 Turbo is making real power on E85, the factory fuel system struggles to stay ahead of the engine in long, hard corners. This kit adds a Radium single pump surge tank in a collision-safe area of the front boot, in front of the fuel tank, and leaves most of the boot usable.\u003c\/p\u003e\n\u003cp\u003eAn anodised aluminium bracket bolts to the OEM pump cover studs, and a replacement aluminium cover is included. The factory dual-venturi system is sensitive to changes, so the kit includes a surge tank orifice that keeps it at the right pressure. Low-profile SAE quick disconnects and solder-free wiring keep the install tidy.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-standard-single-pump-fst-fuel-surge-tank\"\u003eRadium Standard Single Pump FST (20-0960)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fuel-pump-install-kit-pump-not-incl-porsche-911-turbo-996\"\u003eRadium Fuel Pump Install Kit – Porsche 996 Turbo (20-0276-00)\u003c\/a\u003e – main tank pump upgrade to keep the surge tank full\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Radium surge tank and surge tank pump are sold separately.\u003c\/li\u003e\n\u003cli\u003eFor the 996 911 Turbo only.\u003c\/li\u003e\n\u003cli\u003eThe main tank pump has to keep the surge tank full. As a guide it should flow about 40–50% of the surge tank pump, so you may need a main pump upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePorsche 911 Turbo (996)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764953153838,"sku":"20-0288","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0288.jpg?v=1792383398"},{"product_id":"radium-fuel-surge-tank-install-kit-fst-not-incl-honda-s2000-ap2-05-09","title":"Radium Fuel Surge Tank Install Kit (FST Not Incl) - Honda S2000 AP2 05-09","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Honda S2000 AP2\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Honda S2000 AP2 (2006–2009, returnless fuel system)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0114\u003c\/p\u003e\n\u003cp\u003eThe S2000 tank is shallow and oddly shaped, and fuel starvation in long corners is a well-known problem once the car sees a track. This kit installs a Radium FST-R surge tank with a single 39mm pump behind the left seat, using the factory threaded bosses. There's no drilling, and the boot stays fully usable.\u003c\/p\u003e\n\u003cp\u003eLater S2000s are returnless, so the kit is built around the FST-R with its integrated regulator. Because there's no low-pressure return to the tank, a billet barb adapter sends excess fuel back to the main tank through the filler hose. Leave the regulator's manifold-pressure barb disconnected if you want to replicate OEM fuel pressure.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fstr-ra-fuel-surge-tank-w-integrated-fpr-fuel-pressure-regulator\"\u003eRadium FST-R RA Fuel Surge Tank with Integrated Regulator (20-1933)\u003c\/a\u003e – required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds the Radium FST-R (regulated) surge tank. The surge tank and pump are both sold separately.\u003c\/li\u003e\n\u003cli\u003eNot designed for the Radium MPFST.\u003c\/li\u003e\n\u003cli\u003eThe main tank pump has to keep the surge tank full. As a guide it should flow about 40–50% of the surge tank pump, so you may need a main pump upgrade.\u003c\/li\u003e\n\u003cli\u003eThe S2000 cabin is small, so think about pump noise when choosing a surge tank pump.\u003c\/li\u003e\n\u003cli\u003eFor the 1999–2005 AP1 S2000, use the \u003ca href=\"\/products\/radium-fuel-surge-tank-install-kit-fst-not-incl-honda-s2000-ap1-99-04\"\u003eAP1 install kit (20-0094)\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda S2000 AP2 (2006–2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764953874734,"sku":"20-0114","price":602.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0114_1ebcaf6f-b995-4707-a626-138cd32ea419.jpg?v=1792383404"},{"product_id":"radium-fuel-surge-tank-install-kit-fst-not-incl-honda-s2000-ap1-99-04","title":"Radium Fuel Surge Tank Install Kit (FST Not Incl) - Honda S2000 AP1 99-04","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Honda S2000 AP1\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Honda S2000 AP1 (2000–2005)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0094\u003c\/p\u003e\n\u003cp\u003eThe S2000's shallow tank will starve the pump in long corners on a low tank, which is the last thing you want on a track day or at a time attack round. This kit installs a Radium single pump surge tank in a hidden, collision-safe spot behind the left seat, so the F20C is always fed from a full surge tank.\u003c\/p\u003e\n\u003cp\u003eThe aluminium bracket bolts to the factory threaded bosses on three rubber isolators to keep pump noise down. There's no drilling, the boot stays fully usable, and the solder-free wiring goes together in under 30 minutes. The PTFE hoses are safe on E85.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-standard-single-pump-fst-fuel-surge-tank\"\u003eRadium Standard Single Pump FST (20-0960)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe surge tank and fuel pump are not included.\u003c\/li\u003e\n\u003cli\u003eNot designed for the Radium MPFST.\u003c\/li\u003e\n\u003cli\u003eThe main tank pump has to keep the surge tank full. As a guide it should flow about 40–50% of the surge tank pump, so you may need a main pump upgrade.\u003c\/li\u003e\n\u003cli\u003eThe S2000 cabin is small, so think about pump noise when choosing a surge tank pump.\u003c\/li\u003e\n\u003cli\u003eFor the 2006–2009 AP2 (returnless system), use the \u003ca href=\"\/products\/radium-fuel-surge-tank-install-kit-fst-not-incl-honda-s2000-ap2-05-09\"\u003eAP2 install kit (20-0114)\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda S2000 AP1 (2000–2005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764956856622,"sku":"20-0094","price":646.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0094_4279f7a0-c35a-4923-be2c-fe6879850cf4.jpg?v=1792383409"},{"product_id":"radium-fuel-surge-tank-install-kit-ford-focus-st-lw-lz-13-18-ford-focus-rs-lz-16-17","title":"Radium Fuel Surge Tank Install Kit - Ford Focus ST LW\/LZ 13-18\/Ford Focus RS LZ 16-17","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Ford Focus ST \/ RS MK3\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford Focus ST LW\/LZ (2013–2018) and Focus RS LZ (2016–2017), 2.0L and 2.3L EcoBoost\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0365\u003c\/p\u003e\n\u003cp\u003eTuned MK3 Focus STs and RSs are known to starve for fuel under hard cornering on a low tank, and a direct-injected EcoBoost doesn't take kindly to it. This kit adds a Radium FST-R regulated surge tank. The surge tank pump takes over the OEM feed and supplies the factory high-pressure pump, while the OEM low-pressure pump is redirected to keep the surge tank full. Overflow goes back to the tank through a billet adapter in the filler hose.\u003c\/p\u003e\n\u003cp\u003eThe surge tank mounts under the car in a collision-safe spot in front of the rear bumper support, with heat tape to protect it from the exhaust. The FST-R's regulator can run vacuum referenced (1:1) or static, and the solder-free wiring takes under 30 minutes. A good fit for track day, time attack and E85 Focus builds.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fstr-ra-fuel-surge-tank-w-integrated-fpr-fuel-pressure-regulator\"\u003eRadium FST-R RA Fuel Surge Tank with Integrated Regulator (20-1933)\u003c\/a\u003e – required\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fuel-pressure-gauge-w-6an-inline-adapter\"\u003eRadium Fuel Pressure Gauge with 6AN Inline Adapter (20-0152)\u003c\/a\u003e – for setting surge tank pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe FST-R surge tank and surge tank pump are sold separately.\u003c\/li\u003e\n\u003cli\u003eYou'll need a way to set FST-R pressure, either with tuning software that reads it (such as a COBB Accessport) or the 20-0152 gauge on the FST-R outlet.\u003c\/li\u003e\n\u003cli\u003eYou may need a main tank pump upgrade. As a guide, the main tank pump should flow about 40–50% of the surge tank pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus ST LW\/LZ (2013–2018)\u003c\/li\u003e\n\u003cli\u003eFord Focus RS LZ (2016–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764962984238,"sku":"20-0365","price":668.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0365.jpg?v=1792383459"},{"product_id":"radium-fuel-pump-hanger-subaru-wrx-sti-94-07-forester-97-08-liberty-89-98","title":"Radium Fuel Pump Hanger - Subaru WRX, STI 94-07\/Forester 97-08\/Liberty 89-98","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Subaru WRX \/ STI GC8 \u0026amp; GD, Forester, Liberty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Subaru Impreza WRX \/ STI GC8 and GD (1993–2007), Forester SF and SG (1997–2008), Liberty (1989–1999), Outback (1994–1999)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0340-00 (Walbro 255 \/ AEM 50-1200 style pumps), 20-0342-00 (Walbro F900-series pumps)\u003c\/p\u003e\n\u003cp\u003eThe factory pump assembly in an early WRX or Forester was never meant to support big power on E85. This billet hanger replaces it and runs one or two aftermarket high-flow pumps, merged into a single 8AN ORB outlet. It drops into the factory tank using the OEM gasket and hardware, and keeps the factory level sender and temperature sensors.\u003c\/p\u003e\n\u003cp\u003eAn anodised collector box with a built-in check valve keeps the pumps covered, and a venturi jet pump with an integrated pressure relief valve, sized for high-flow pumps, pulls fuel across the saddle tank. Anti-rotation stainless studs and ETFE in-tank wiring handle the current. It's a proven setup on Australian GC8 and GD WRX and STI builds, from street E85 cars to drag and time attack.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – heavier-gauge wiring for high-flow pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003eRadium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)\u003c\/a\u003e – for AEM 50-1230 \/ 50-1235 pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003eRadium Check Valve, 6AN ORB to 10mm Barb (20-1534)\u003c\/a\u003e – for Walbro F90000295 pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eDoesn't suit the JDM WRX STI Spec C.\u003c\/li\u003e\n\u003cli\u003eAEM 50-1230 \/ 50-1235 and Walbro F90000295 pumps have no internal check valve, so add the matching check valve.\u003c\/li\u003e\n\u003cli\u003eHeavier-gauge pump wiring is recommended for high-flow pumps. Single-pump setups can reuse the OEM controller.\u003c\/li\u003e\n\u003cli\u003eOther similar pumps may fit, but Radium hasn't verified them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru Impreza, WRX and STI GC8 \/ GD (1993–2007) – excludes JDM STI Spec C\u003c\/li\u003e\n\u003cli\u003eSubaru Forester SF \/ SG (1997–2008)\u003c\/li\u003e\n\u003cli\u003eSubaru Liberty (1989–1999)\u003c\/li\u003e\n\u003cli\u003eSubaru Outback (1994–1999)\u003c\/li\u003e\n\u003cli\u003eSaab 9-2X (2005–2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Subaru \/ Walbro GSS342\/AEM 50-1200","offer_id":67764963541294,"sku":"20-0340-00","price":1100.99,"currency_code":"AUD","in_stock":true},{"title":"Subaru \/ Walbro F90000267\/274\/285\/295","offer_id":67764963574062,"sku":"20-0342-00","price":1100.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0340.jpg?v=1792383459"},{"product_id":"radium-fuel-surge-tank-install-kit-ford-f150-raptor-2017-2020","title":"Radium Fuel Surge Tank Install Kit - Ford F150 Raptor 2017-2020","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – Ford F-150 EcoBoost \/ Raptor\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Ford F-150 EcoBoost V6 (2015–2020) and F-150 Raptor (2017–2020)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0487\u003c\/p\u003e\n\u003cp\u003eTuned EcoBoost F-150s and Raptors run out of fuel pump quickly, especially on E85. This kit installs a Radium FST-R regulated surge tank. The factory pump is repurposed to keep the surge tank full, with excess going back to the main tank, and the surge tank pump feeds the engine through the FST-R's built-in regulator. If the OEM pump is momentarily starved off-road or under load, the engine keeps getting fuel.\u003c\/p\u003e\n\u003cp\u003eSome FST-R pump options outflow the factory Raptor pump by more than 23%. The surge tank mounts in a collision-safe spot under the left-hand side of the truck on a polished stainless bracket that bolts to OEM points. The included gauge lets you set pressure, running vacuum referenced (1:1) or static to mimic stock.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fstr-ra-fuel-surge-tank-w-integrated-fpr-fuel-pressure-regulator\"\u003eRadium FST-R RA Fuel Surge Tank with Integrated Regulator (20-1933)\u003c\/a\u003e – required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe FST-R surge tank and a surge tank pump are sold separately. Order the kit, surge tank and pump together for a complete system.\u003c\/li\u003e\n\u003cli\u003eYou may need a drop-in main tank pump. As a guide it should flow about 40–50% of the surge tank pump.\u003c\/li\u003e\n\u003cli\u003eWiring uses flying leads, Raychem butt splices and a weatherproof fuse and relay. No soldering, under 30 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord F-150 EcoBoost V6 (2015–2020)\u003c\/li\u003e\n\u003cli\u003eFord F-150 Raptor EcoBoost V6 (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764965310766,"sku":"20-0487","price":786.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0487_612b9063-e0a1-46e5-ba92-db54fbd8f702.jpg?v=1792383464"},{"product_id":"radium-fuel-hanger-surge-tank-install-kit-bmw-e46-3-series-m3-excl-convertible","title":"Radium Fuel Hanger Surge Tank Install Kit - BMW E46 3-Series\/M3 (Excl. Convertible)","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit – BMW E46 3 Series \/ M3\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e BMW E46 3 Series and M3 (1999–2006), excluding Convertible\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0974\u003c\/p\u003e\n\u003cp\u003eE46s are a favourite for drift and track builds, and the saddle tank will starve under sustained cornering once the level drops. This kit installs a Radium surge tank in a collision-safe spot in the boot behind the rear seat, on a bolt-on aluminium bracket with rubber isolators to keep pump noise down.\u003c\/p\u003e\n\u003cp\u003ePre-assembled 3\/8in PTFE hoses, cut to length, meet at an anodised aluminium bulkhead plate in the boot. A weatherproof 40A relay and 25A fuse power the surge tank pump, and a Delphi Weatherpak connector makes pump activation modular.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-standard-single-pump-fst-fuel-surge-tank\"\u003eRadium Standard Single Pump FST (20-0960)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-bmw-e46-fuel-pump-hanger\"\u003eRadium BMW E46 Fuel Pump Hanger (20-1180)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe surge tank and surge tank pump are sold separately.\u003c\/li\u003e\n\u003cli\u003eDoesn't fit the E46 Convertible.\u003c\/li\u003e\n\u003cli\u003eYou may need a main tank pump upgrade. As a guide, the main tank pump should flow about 40–50% of the surge tank pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW E46 3 Series sedan, coupe, wagon and hatch (1999–2006)\u003c\/li\u003e\n\u003cli\u003eBMW E46 M3 coupe (2000–2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764966392110,"sku":"20-0974","price":821.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0974.jpg?v=1792383473"},{"product_id":"radium-acorn-nuts-anodized-aluminum-15pk","title":"Radium Acorn Nuts - Anodized Aluminum - 15PK","description":"\u003ch2\u003eRadium Acorn Nuts – Anodised Aluminium, 15 Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium fuel pump hangers, surge tanks and FCSTs with top-hat electrical studs (all generations)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0506\u003c\/p\u003e\n\u003cp\u003eReplacement #10-32 acorn nuts for the top-hat electrical studs on Radium hangers and surge tanks. They're aluminium and anodised so they don't conduct, which protects the exposed stud ends from accidental shorts against the body or a stray tool.\u003c\/p\u003e\n\u003cp\u003eHandy to keep on the shelf for when one goes missing during a pump change or rewire.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNuts only. Studs and locking nuts are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal – any Radium hanger, surge tank or FCST with top-hat #10-32 studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764974551342,"sku":"20-0506","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0506.jpg?v=1792383516"},{"product_id":"radium-fuel-pump-hanger-mitsubishi-evo-x","title":"Radium Fuel Pump Hanger - Mitsubishi Evo X","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Mitsubishi Evo X\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Mitsubishi Lancer Evolution X (2008–2015)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1640 (Walbro GSS342 \/ AEM 50-1200 \/ 50-1220), 20-1642 (Walbro F900-series), 20-0644-00 (DeatschWerks DW400)\u003c\/p\u003e\n\u003cp\u003eThe factory Evo X pump module runs out of headroom fast once the 4B11 is making real power on E85. This hanger replaces it and runs one or two aftermarket pumps, while keeping the factory level sender, fuel temperature sensor and tank pressure sensor working.\u003c\/p\u003e\n\u003cp\u003eA one-piece anodised collector box surrounds the pump inlets and is refilled by regulator return fuel through a 355 lph one-way valve, so the pumps stay covered in hard corners on a low tank. Radium also redesigned the jet pump to remove the restriction in the stock siphon. Adapters connect to the OEM lines, and 8AN and 6AN adapters are included for when you move to AN hose. It's a staple on Australian Evo X builds, from street cars to time attack.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-evo-x-fuel-feed-stainless-filter\"\u003eRadium Evo X Fuel Feed Kit with Stainless Filter (20-0946-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-return-mitsubishi-evo-x\"\u003eRadium Fuel Hanger Return Kit – Evo X (20-0249)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-tank-pressure-sensor-plug-mitsubishi-evo-x\"\u003eRadium Fuel Tank Pressure Sensor Plug – Evo X (20-0421)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – one kit per pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are sold separately.\u003c\/li\u003e\n\u003cli\u003eThe hanger removes the OEM post-pump filter, so you must fit a low-micron filter downstream to protect the injectors.\u003c\/li\u003e\n\u003cli\u003eThe jet pump uses 15–45 lph depending on pressure. Allow for this when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eFit a check valve if you need pressure to hold after shutdown. The 20-0946 feed kit has one built in.\u003c\/li\u003e\n\u003cli\u003eCars without the OEM tank pressure sensor (8651A025), which includes many non-US cars, need the 20-0421 plug.\u003c\/li\u003e\n\u003cli\u003eUpgrade the feed and return lines and the pump wiring when running two pumps.\u003c\/li\u003e\n\u003cli\u003eRadium now lists the DW400 version as \u003ca href=\"\/products\/radium-fuel-pump-hanger-mitsubishi-lancer-evolution-x-dw400-pumps-not-included\"\u003e20-1644\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution X (2008–2015)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342\/AEM 50-1200\/50-1220","offer_id":67764975305006,"sku":"20-1640","price":925.99,"currency_code":"AUD","in_stock":true},{"title":"Walbro F90000267\/274\/285\/295","offer_id":67764975337774,"sku":"20-1642","price":925.99,"currency_code":"AUD","in_stock":true},{"title":"Deatschwerks DW400","offer_id":67764975370542,"sku":"20-0644-00","price":925.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-064_6c103320-4e6b-4d81-93f8-521573215dc0.jpg?v=1792383521"},{"product_id":"radium-fuel-pump-hanger-nissan-200sx-s14-s15-skyline-r33-r34","title":"Radium Fuel Pump Hanger - Nissan 200SX S14, S15\/Skyline R33, R34","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Nissan Silvia S14 \/ S15, Skyline R33 \/ R34\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia \/ 200SX S14 and S15, Skyline R33 and R34 (all models, RHD and LHD)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0630-00 (Walbro GSS342 \/ AEM 50-1200 style pumps), 20-0632-00 (Walbro F900-series and brushless pumps)\u003c\/p\u003e\n\u003cp\u003eThe factory pump assembly in an S14, S15 or R33\/R34 is long past its best on a built SR20 or RB running E85. This hanger replaces it completely and runs one or two aftermarket pumps, including brushless, with the pumps sitting at the bottom of the tank. The factory level sender, low fuel switch and (on OBD-II cars) fuel temperature sensor all stay.\u003c\/p\u003e\n\u003cp\u003eAn integrated jet pump scavenges fuel from the passenger side of the saddle tank. Radium redesigned the siphon so it doesn't choke the return when you run high-flow pumps, keeping return backpressure in check. Factory quick-connect and barb lines connect directly, so it's equally at home in a street car, a drift car or a time attack Skyline.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-s14-s15-silvia-r33-r34-skyline\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – S14 \/ S15 \/ R33 \/ R34 (20-0702)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-surge-tank-add-on-nissan-200sx-s14-s15-skyline-r33-r34\"\u003eRadium Fuel Hanger Surge Tank Add-On – S14 \/ S15 \/ R33 \/ R34 (20-0700)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003eRadium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)\u003c\/a\u003e – for AEM 50-1230 \/ 50-1235\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003eRadium Check Valve, 6AN ORB to 10mm Barb (20-1534)\u003c\/a\u003e – for Walbro F90000295 \/ Ti E5LM\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-pump-outlet-adapter-check-valve-with-10mm-barb\"\u003eRadium Pump Outlet Adapter with Check Valve, 10mm Barb (20-0798)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – one kit per pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps and fuel pressure regulator are not included.\u003c\/li\u003e\n\u003cli\u003e20-0630-00 suits Walbro GSS342, AEM 50-1200, 50-1230 and 50-1235. The AEM 50-1230 \/ 50-1235 have no internal check valve and need 20-1533.\u003c\/li\u003e\n\u003cli\u003e20-0632-00 suits Walbro F90000267, F90000274, F90000285, F90000295 and Ti E5LM brushless. The F90000295 and E5LM need 20-1534.\u003c\/li\u003e\n\u003cli\u003eIf you run aftermarket AN hose, use low-profile swivel fittings (sold separately). Straight fittings may not clear the access cover.\u003c\/li\u003e\n\u003cli\u003eThe jet pump uses 15–45 lph depending on pressure. Allow for this when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eSingle-pump installs can reuse OEM wiring, but upgraded wiring is recommended so the pumps see full voltage.\u003c\/li\u003e\n\u003cli\u003eComes partly assembled. Final assembly is done during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S14 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S15 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R33 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R34 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan 240SX S14 (LHD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Nissan \/ Walbro GSS342\/AEM 50-1200","offer_id":67764975403310,"sku":"20-0630-00","price":925.99,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Walbro F90000267\/274\/285\/295","offer_id":67764975436078,"sku":"20-0632-00","price":925.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0630.webp?v=1792383521"},{"product_id":"radium-fuel-pump-hanger-nissan-gt-r-r35","title":"Radium Fuel Pump Hanger - Nissan GT-R R35","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Nissan GT-R R35\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan GT-R R35\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0572\u003c\/p\u003e\n\u003cp\u003eBig-power R35s on E85 need more pump than the factory unit can give, and the saddle tank's twin OEM jet pumps become a restriction once you upgrade. This drop-in hanger holds up to three 39mm pumps, brushed or brushless, with no permanent changes to the car. The pumps feed from an anodised collector box with three one-way fill valves (1065 lph combined), so they stay covered during launches and hard cornering.\u003c\/p\u003e\n\u003cp\u003eRadium has rerouted the jet pump plumbing so the siphons still work without restricting the regulator return, which keeps fuel pressure stable. Swivel adapters and short 6AN PTFE hoses connect to the OEM hard lines, and the factory temperature and level sensors are reused. It's the hanger of choice for high-power GT-Rs at the drag strip and on the street.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-feed-kit-w-microglass-filter-nissan-gt-r-r35\"\u003eRadium Fuel Hanger Feed Kit with Microglass Filter – R35 (20-0851-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-feed-kit-nissan-r35-gt-r-stainless-filter\"\u003eRadium Fuel Hanger Feed Kit with Stainless Filter – R35 (20-0851-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-kit-nissan-gt-r-r35\"\u003eRadium Fuel Rail Kit – Nissan GT-R R35 (20-0556-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are not included. Radium-verified pumps: AEM 50-1200, Walbro GSS342, Injector Dynamics BPC100 and Ti Automotive BKS1001 (E5LM) brushless.\u003c\/li\u003e\n\u003cli\u003eThe factory post-pump filter is removed, so you must fit an aftermarket filter downstream (the 20-0851 feed kits cover this).\u003c\/li\u003e\n\u003cli\u003eRadium lists the 20-0851 feed kits as LHD only. Australian GT-Rs are RHD, so email us to confirm plumbing before ordering.\u003c\/li\u003e\n\u003cli\u003eThe jet pumps use roughly 15–45 lph depending on pressure. Allow for this when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eEach brushless pump needs its own controller. Two pumps can sometimes run off OEM wiring, but a third needs custom wiring.\u003c\/li\u003e\n\u003cli\u003eWe recommend reading the installation instructions before you buy. Email us for a copy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan GT-R R35 (all years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764976320814,"sku":"20-0572","price":1432.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0572_c1f42469-29a7-48e8-a1ef-5e34894d7f62.jpg?v=1792383524"},{"product_id":"radium-fuel-level-sender-adaptor-nissan-350z-z33-nissan-skyline-v35","title":"Radium Fuel Level Sender Adaptor - Nissan 350Z Z33\/Nissan Skyline V35","description":"\u003ch2\u003eRadium Early Fuel Level Sender Adapter – Nissan 350Z \/ Skyline V35\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Early Nissan 350Z Z33 and Skyline V35 coupe with the early-style OEM level sender\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0596\u003c\/p\u003e\n\u003cp\u003eEarly 350Zs and V35 coupes use a different fuel level sender from later cars, and it won't bolt straight to the stainless bracket supplied with the Radium FHST. This adapter mounts the early sender to that bracket, so your factory fuel gauge keeps working after the upgrade.\u003c\/p\u003e\n\u003cp\u003eLater cars with the updated sender don't need it, so check your build date below before ordering.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fhst-fuel-hanger-surge-tank-350z-g35\"\u003eRadium FHST Fuel Hanger Surge Tank – 350Z \/ G35 (20-1830)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOnly needed with the early-style OEM sender. Later cars don't need it.\u003c\/li\u003e\n\u003cli\u003eSome V36 Skyline, G37, Q50 and Q60 models use the \u003ca href=\"\/products\/radium-fuel-level-adapter-nissan-skyline-v36-infiniti-g37-q50-q60\"\u003e20-0896 adapter\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003cli\u003eThe Radium FHST is sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan 350Z \/ Fairlady Z Z33 (Jan 2002 – Jan 2004 build)\u003c\/li\u003e\n\u003cli\u003eNissan Skyline V35 coupe (Jan 2001 – Mar 2003 build)\u003c\/li\u003e\n\u003cli\u003eInfiniti G35 coupe (Jan 2001 – Mar 2003 build)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764976910638,"sku":"20-0596","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0596_83d69927-44c1-4137-97a7-6199069976ac.jpg?v=1792383525"},{"product_id":"radium-fuel-pump-hanger-nissan-180-sx-silvia-s13-skyline-r32-gts-gts-t","title":"Radium Fuel Pump Hanger - Nissan 180 SX, Silvia S13\/Skyline R32 GTS, GTS-T","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Nissan Silvia S13 \/ 180SX \/ Skyline R32\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia S13, 180SX, 200SX and Skyline R32 GTS \/ GTS-T \/ GTS-4 (not GT-R)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0730-00 (Walbro GSS342 \/ AEM 50-1000 \/ 50-1200), 20-0732-00 (Walbro F900-series)\u003c\/p\u003e\n\u003cp\u003eThe factory pump module in an S13 or R32 was never designed for a built SR20, CA18 or RB25 swap running E85. This hanger replaces it with no cutting of the body or tank, and runs one, two or three aftermarket pumps in the factory collector bowl. The OEM float and low fuel switch still work, so your gauge reads as normal.\u003c\/p\u003e\n\u003cp\u003eFuel enters through a mesh pre-filter into three separate chambers, so fuel can't pass between pumps and unused ports don't need blocking off. The pumps merge into a single 8AN ORB outlet with integrated check valves, so you can stage pumps on and off. Adapters for the factory lines and AN hose are included, and every port is low enough to clear the floor. A proven setup for Australian drift and street S13s and R32s.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-silvia-s13-180sx-s13-skyline-r32\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – S13 \/ 180SX \/ R32 (20-0703)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – one kit per pump\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-access-cover-nissan-s13-silvia-180sx-skyline-r32\"\u003eRadium Fuel Pump Access Cover – S13 \/ 180SX \/ R32 (20-0735)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are not included. Choose pumps to suit your power target and fuel.\u003c\/li\u003e\n\u003cli\u003eThe listed pumps are verified by Radium. Other similar pumps may fit but aren't verified.\u003c\/li\u003e\n\u003cli\u003eA single GSS342 can reuse the OEM wiring, but upgraded wiring is recommended for full pump output.\u003c\/li\u003e\n\u003cli\u003eDoesn't fit the R32 GT-R. For the GT-R, use the \u003ca href=\"\/products\/radium-fuel-hanger-surge-tank-fhst-nissan-skyline-r32-gt-r\"\u003eR32 GT-R FHST (20-0740)\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eComes partly assembled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia S13 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan 180SX \/ 200SX S13 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 GTS \/ GTS-T – RHD and LHD, excluding GT-R\u003c\/li\u003e\n\u003cli\u003eNissan 240SX S13 (LHD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Nissan \/ Walbro GSS342\/AEM 50-1200","offer_id":67764991230254,"sku":"20-0730-00","price":590.24,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Walbro F90000267\/274\/285\/295","offer_id":67764991263022,"sku":"20-0732-00","price":590.24,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0730.jpg?v=1792383578"},{"product_id":"radium-fuel-pump-hanger-subaru-wrx-08-21-sti-08-21-fxt-08-18-lgt-04-09","title":"Radium Fuel Pump Hanger - Subaru WRX 08-21\/STI 08-21\/FXT 08-18\/LGT 04-09","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Subaru WRX \/ STI 2008–2021, Forester, Liberty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Subaru Impreza WRX \/ STI GE\/GH\/GR\/GV (2008–2014), WRX and WRX STI VA (2015–2021), Forester SH (2008–2013) and Forester XT SJ (2014–2018), Liberty \/ Outback (2005–2009)\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0780-00 (Walbro GSS342 \/ AEM 50-1200 style), 20-0781-00 (DeatschWerks DW400), 20-0782-00 (Walbro F900-series)\u003c\/p\u003e\n\u003cp\u003eThe factory pump in a late WRX or STI is one of the first things to run out on a tuned EJ or FA running E85. This hanger replaces the OEM hanger and hold-down flange, reusing the factory gasket, and runs one or two high-flow pumps with no permanent modifications. Both pumps merge internally into one outlet, so there's no external line merging.\u003c\/p\u003e\n\u003cp\u003eAn anodised collector box with two one-way fill valves (710 lph combined) keeps the pumps covered, and a jet pump with a built-in pressure relief valve moves fuel across the saddle tank without restricting the return. A duckbill valve cuts backflow and fuel spray noise. Radium's instructions include extra steps for RHD cars, so it's well suited to Australian WRX and STI builds.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-w-filter-subaru-wrx-08-14-sti-08-21-fxt-08-13-lgt-04-09\"\u003eRadium Fuel Rail Plumbing Kit with Filter – Subaru (20-0629)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-sensor-adaptor-subaru-wrx-va-forester-xt-sj\"\u003eRadium Fuel Level Sensor Adapter – WRX VA \/ Forester XT SJ (20-0850)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003eRadium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)\u003c\/a\u003e – for AEM 50-1230 \/ 50-1235\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003eRadium Check Valve, 6AN ORB to 10mm Barb (20-1534)\u003c\/a\u003e – for Walbro F90000295\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/injector-dynamics-xds-injectors-4-cyl-set-subaru-wrx-2001-2014-wrx-sti-2002-2021\"\u003eInjector Dynamics XDS 4-cylinder set – Subaru WRX \/ STI\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eAEM 50-1230, 50-1235 and Walbro F90000295 have no internal check valve. Add 20-1533 (AEM) or 20-1534 (Walbro).\u003c\/li\u003e\n\u003cli\u003eEvery install needs an external post-pump filter. It's included in the 20-0629 plumbing kit.\u003c\/li\u003e\n\u003cli\u003e2015–2021 WRX (FA20) and 2014–2018 Forester XT are returnless from the factory, so they need the 20-0850 level sender adapter and an aftermarket regulator.\u003c\/li\u003e\n\u003cli\u003eSingle-pump installs can reuse OEM wiring, but upgraded wiring is recommended for high-current pumps (one DIY kit per pump).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru Impreza WRX \/ STI (2008–2014)\u003c\/li\u003e\n\u003cli\u003eSubaru WRX STI VA (2015–2021)\u003c\/li\u003e\n\u003cli\u003eSubaru WRX VA (2015–2021) – needs 20-0850 and an aftermarket regulator\u003c\/li\u003e\n\u003cli\u003eSubaru Forester SH (2008–2013)\u003c\/li\u003e\n\u003cli\u003eSubaru Forester XT SJ (2014–2018) – needs 20-0850 and an aftermarket regulator\u003c\/li\u003e\n\u003cli\u003eSubaru Liberty \/ Legacy (2005–2009)\u003c\/li\u003e\n\u003cli\u003eSubaru Outback (2005–2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Subaru \/ Walbro GSS342\/AEM 50-1200","offer_id":67764991361326,"sku":"20-0780-00","price":908.99,"currency_code":"AUD","in_stock":true},{"title":"Subaru \/ Walbro F90000267\/274\/285","offer_id":67764991394094,"sku":"20-0782-00","price":943.99,"currency_code":"AUD","in_stock":true},{"title":"Subaru \/ Deatschwerks DW400","offer_id":67764991426862,"sku":"20-0781-00","price":943.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0780_c651df46-25c8-44c6-8a22-e111a882349b.jpg?v=1792383581"},{"product_id":"radium-fuel-pump-hanger-toyota-gr-supra-a90-a91-2019","title":"Radium Fuel Pump Hanger, Toyota GR Supra A90 \/ A91 (2019+)","description":"\u003ch2\u003eRadium Auxiliary Fuel Pump Hanger – Toyota GR Supra A90 \/ A91\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Toyota GR Supra A90 \/ A91 (2019+), B58\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0760\u003c\/p\u003e\n\u003cp\u003eAdding port injection is the go-to way to make big power on a B58 Supra with E85, but it needs its own fuel supply. This hanger adds one independent 39mm pump for the port injection system and leaves the factory direct injection system completely untouched. The OEM pump, regulator, filters, collector basket, jet pump and level sensor all stay, and the tank isn't modified.\u003c\/p\u003e\n\u003cp\u003eThe extra pump sits in the OEM collector basket, which is kept full by the jet pump, return fuel from both regulators and a one-way fill valve. Return fuel comes in through a fitting with an internal deflector to cut turbulence and foaming. Low-profile banjo fittings come preinstalled.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-filter-toyota-gr-supra-a90-a91-2019\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – GR Supra (20-0761)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-port-injection-fuel-rail-kit-toyota-supra-a90-19-bmw-z4-g29-18\"\u003eRadium Port Injection Fuel Rail Kit – GR Supra \/ Z4 G29 (20-0753)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dmr-ra-direct-mount-fuel-pressure-regulator\"\u003eRadium DMR-RA Direct Mount Fuel Pressure Regulator (20-1623)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pump is not included.\u003c\/li\u003e\n\u003cli\u003eYou'll need an external regulator and a low-micron filter downstream of the port injection feed. Neither is included.\u003c\/li\u003e\n\u003cli\u003eExternal wiring for the extra pump is not included.\u003c\/li\u003e\n\u003cli\u003eOnly 39mm pumps fit. Larger pumps such as Walbro F900-series, DW400 and Bosch BR540 won't.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota GR Supra A90 \/ A91 (2019+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764992409902,"sku":"20-0760","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0760_a9b2dc99-d1aa-4566-a3b3-411dee1dc742.jpg?v=1792383582"},{"product_id":"radium-fuel-hanger-surge-tank-fhst-nissan-skyline-r32-gt-r","title":"Radium Fuel Hanger Surge Tank (FHST), Nissan Skyline R32 GT-R","description":"\u003ch2\u003eRadium Fuel Hanger Surge Tank (FHST) – Nissan Skyline R32 GT-R\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Skyline R32 GT-R (BNR32), RB26DETT\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0740-00 (Walbro GSS342 \/ AEM 50-1000 \/ 50-1200), 20-0741-00 (Ti E5LM brushless), 20-0742-00 (Walbro F900-series)\u003c\/p\u003e\n\u003cp\u003eA built RB26 on E85 needs serious fuel, and the R32 GT-R tank sloshes enough under hard cornering and launches to starve the pumps. The FHST puts a full surge tank inside the factory tank: a lift pump in a stainless collector box keeps it topped up from the bottom of the tank, along with regulator return fuel, while one, two or three high-pressure pumps feed the engine from the surge tank.\u003c\/p\u003e\n\u003cp\u003eBarbs connect straight to the factory rubber hoses, and 8AN feed and 6AN return adapters are included for AN hose, with every port low enough to clear the floor. A replacement OEM Nissan level sender with the resistance the cluster expects is included, so your fuel gauge reads correctly. It's the answer for big-power R32 GT-Rs at the drag strip, on the street or at time attack.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-silvia-s13-180sx-s13-skyline-r32\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – S13 \/ 180SX \/ R32 (20-0703)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – one per extra surge pump\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-fuel-pump-filter-base-adapter-12mm-brushless-pumps-13-1187\"\u003eRadium Fuel Pump Filter Base Adapter – 12mm Brushless (13-1187)\u003c\/a\u003e – for Protec, Fuelab and DW810 pumps\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-rail-plumbing-kit-nissan-skyline-gts-t-gt-r-r32-gt-r-r33-r34-rb20-rb26\"\u003eRadium RB20 \/ RB26 Fuel Rail Plumbing Kit (20-0217-PK)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-hicas-line-retainer-kit-nissan-silvia-s13-s14-s15-skyline-r32-r33-r34\"\u003eRadium HICAS Line Retainer Kit (20-0627)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-access-cover-nissan-s13-silvia-180sx-skyline-r32\"\u003eRadium Fuel Pump Access Cover – S13 \/ 180SX \/ R32 (20-0735)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are sold separately. You need at least one lift pump and one surge pump.\u003c\/li\u003e\n\u003cli\u003eEach extra surge pump needs its own fuse and relay (17-0031). The lift pump runs on the OEM pump wiring. DIY wiring for one pump is included.\u003c\/li\u003e\n\u003cli\u003e20-0742-00 also suits Protec 11928, Fuelab 49614 and DW810 pumps with the 13-1187 adapter.\u003c\/li\u003e\n\u003cli\u003eMixing brushed and brushless pumps is possible on 20-0741-00, but it needs extra socks, fittings and harnesses. Email us and we'll put the parts list together.\u003c\/li\u003e\n\u003cli\u003eFor non-GT-R R32 Skylines, use the \u003ca href=\"\/products\/radium-fuel-pump-hanger-nissan-180-sx-silvia-s13-skyline-r32-gts-gts-t\"\u003eS13 \/ R32 fuel pump hanger (20-0730)\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline R32 GT-R (BNR32), RB26DETT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Nissan \/ Walbro GSS342\/AEM 50-1200","offer_id":67764993098030,"sku":"20-0740-00","price":1380.99,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Ti Automotive E5LM","offer_id":67764993130798,"sku":"20-0741-00","price":1432.99,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Walbro F90000267\/274\/285","offer_id":67764993163566,"sku":"20-0742-00","price":1432.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0740_ea9a7a51-0a47-4c23-90c6-28f3290e0987.jpg?v=1792383588"},{"product_id":"radium-fuel-hanger-surge-tank-add-on-nissan-200sx-s14-s15-skyline-r33-r34","title":"Radium Fuel Hanger Surge Tank Add-On - Nissan 200SX S14, S15\/Skyline R33, R34","description":"\u003ch2\u003eRadium Fuel Hanger Surge Tank Add-On – Nissan Silvia S14 \/ S15, Skyline R33 \/ R34\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan Silvia \/ 200SX S14 and S15, Skyline R33 and R34 (all models, RHD and LHD) with the Radium late Nissan fuel pump hanger\u003cbr\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0700 (Walbro GSS342 \/ AEM 50-1200 style), 20-0701 (Walbro F900-series \/ Ti E5LM)\u003c\/p\u003e\n\u003cp\u003eThe saddle tank in these Nissans has very little baffling, so fuel sloshes away from the pickup under hard driving, pressure wobbles and the engine goes lean. That's a real risk in drift and time attack. This add-on bolts a full surge tank inside the factory tank, plugging into the Radium late Nissan hanger with no grinding, bending or vehicle modification.\u003c\/p\u003e\n\u003cp\u003eThe surge tank holds one or two pumps, including brushless. It's kept full from four sources: the pump in the factory location (now a high-flow lift pump), regulator return fuel, the jet pump siphon and a 355 lph one-way fill valve. Radium recommends feeding it from a single-pump hanger, giving two or three pumps in the tank in total.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-fuel-pump-hanger-nissan-200sx-s14-s15-skyline-r33-r34\"\u003eRadium Fuel Pump Hanger – S14 \/ S15 \/ R33 \/ R34 (20-0630)\u003c\/a\u003e – required\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-nissan-s14-s15-silvia-r33-r34-skyline\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – S14 \/ S15 \/ R33 \/ R34 (20-0702)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e – for a second surge pump\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radium-engineering-pump-outlet-adapter-check-valve-with-10mm-barb\"\u003eRadium Pump Outlet Adapter with Check Valve (20-0798)\u003c\/a\u003e – for an F90000295 or E5LM lift pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a Radium late Nissan hanger: 20-0630-00 with 20-0700, or 20-0632-00 with 20-0701. Not included.\u003c\/li\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eWiring for one surge pump is included. A second surge pump needs its own fuse and relay (17-0031). The lift pump runs on the OEM pump wiring.\u003c\/li\u003e\n\u003cli\u003ePumps without an internal check valve (AEM 50-1230 \/ 50-1235) need \u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003e20-1533\u003c\/a\u003e, one per pump. Some 20-0701 pumps need \u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003e20-1534\u003c\/a\u003e (not in the lift pump position).\u003c\/li\u003e\n\u003cli\u003eIf you use an F90000295 or E5LM as the lift pump, fit 20-0798 so the surge tank doesn't drain back and cause long cranking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S14 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S15 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R33 – all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R34 – all models, RHD and LHD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Nissan \/ Walbro GSS342\/AEM 50-1200","offer_id":67764993917230,"sku":"20-0700","price":698.99,"currency_code":"AUD","in_stock":true},{"title":"Nissan \/ Walbro F90000267\/274\/285\/295\/E5LM","offer_id":67764993949998,"sku":"20-0701","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-070_7b7c8da1-9619-4138-a43c-728eb3d9a869.jpg?v=1792383592"},{"product_id":"radium-fuel-hanger-surge-tank-fhst-audi-r8-lamborghini-gallardo-huracan","title":"Radium Fuel Hanger Surge Tank (FHST), Audi R8 \/ Lamborghini Gallardo \/ Huracan","description":"\u003ch2\u003eRadium Fuel Hanger Surge Tank (FHST) – Audi R8 \/ Lamborghini Gallardo \/ Huracán\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Audi R8 Gen 1 (Type 42) and Gen 2 (Type 4S), Lamborghini Gallardo LP and Huracán\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0860\u003c\/p\u003e\u003cp\u003eOnce a V10 R8 or Lamborghini is making serious boost or running E85, the factory fuel system runs out of headroom. The Radium FHST drops into the LH side of the OEM tank alongside the factory pump and gives you a dedicated aftermarket pump to feed the port injectors on its own, while the OEM pump keeps looking after direct injection. On the Huracán and R8 Type 4S it also does away with the restrictive orifice fittings on the factory port injection rails.\u003c\/p\u003e\u003cp\u003eA surge collector keeps fuel around the aftermarket pump so it won't starve or cavitate under hard cornering or high load, which matters on a twin-turbo build at a time attack day or a long run down the strip. It's kept full by the LH OEM venturi jet pump (flow tested to 302 lph), regulator return via a diverter and three one-way fill valves. The OEM pump, filter, regulator, jet pumps and level sensors all stay in place.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fhst-extension-add-on-audi-r8-type-4s-lamborghini-huracan\"\u003eRadium FHST Extension Add-On – R8 Type 4S \/ Huracán (20-0868)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-port-injection-fuel-rail-kit-audi-r8-v10-06-15-lamborghini-gallardo-08-13\"\u003eRadium Port Injection Fuel Rail Kit – R8 V10 \/ Gallardo (20-0865)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-port-injection-plumbing-kit-lamborghini-gallardo-lp-550-560-570-2008-2013\"\u003eRadium Port Injection Plumbing Kit – Gallardo LP (20-0967-03 \/ -05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pump is not included.\u003c\/li\u003e\n\u003cli\u003eThe 20-0868 extension is strongly recommended on the R8 Type 4S and Huracán so the pump reaches the lowest part of the tank. It does not suit the Gen 1 R8 or Gallardo.\u003c\/li\u003e\n\u003cli\u003eVerified pumps: Walbro F90000267, F90000274, F90000285, F90000295, GSS342; AEM 50-1200; Bosch BR540; DeatschWerks DW400, DW440, DW810; Protec 11928; Fuelab 49614; Injector Dynamics BPC1000; Ti Automotive BKS1001. Other pumps may fit but aren't verified by Radium.\u003c\/li\u003e\n\u003cli\u003eA relay kit is recommended to drive the FHST pump.\u003c\/li\u003e\n\u003cli\u003eOn the Huracán and R8 Type 4S, work with your tuner to get the most from the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi R8 Gen 1 (Type 42)\u003c\/li\u003e\n\u003cli\u003eAudi R8 Gen 2 (Type 4S)\u003c\/li\u003e\n\u003cli\u003eLamborghini Gallardo LP550-2, LP560-4, LP570-4\u003c\/li\u003e\n\u003cli\u003eLamborghini Huracán LP580-2, LP610-4, LP640-4, EVO, STO, Tecnica\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764997882158,"sku":"20-0860","price":1397.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0860.jpg?v=1792383634"},{"product_id":"radium-standard-single-pump-fst-fuel-surge-tank","title":"Radium Standard Single Pump FST Fuel Surge Tank","description":"\u003ch2\u003eRadium Standard Single Pump Fuel Surge Tank (FST)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal – any EFI build needing a stable fuel supply\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0960\u003c\/p\u003e\u003cp\u003ePoor tank baffling is one of the most common reasons a built car leans out mid-corner or at the top of a long straight. A surge tank fixes it without touching the factory tank: your existing in-tank pump keeps the FST topped up, the regulator return feeds back into it, and the excess overflows to the main tank. The pump inside the FST always has a column of fuel to draw from, so fuel pressure stays steady whether you're on a drift track, at a time attack round or doing laps on street E85.\u003c\/p\u003e\u003cp\u003eThe Radium single pump FST is a 1.5 litre extruded, anodised aluminium canister with removable O-ring sealed billet caps. The internal pump feeds the rail through a green 6AN outlet, while three interchangeable 6AN ORB ports handle lift pump inlet, overflow and regulator return. An internal deflector cuts foaming and aeration, and the tank can be mounted anywhere from vertical to horizontal.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-surge-tank-mounting-bracket-universal-side-floor-mount\"\u003eRadium FST Mounting Bracket, Universal Side \/ Floor (13-0054)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-switch-1-8-npt\"\u003eRadium Fuel Level Switch, 1\/8in NPT (20-0461)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-diagnostic-indicator\"\u003eRadium Fuel Level Diagnostic Indicator (20-0508)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-o-ring-service-kit-standard-fst\"\u003eRadium O-Ring Service Kit, Standard FST (20-0087)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pump is not included.\u003c\/li\u003e\n\u003cli\u003eAn overflow return to the main tank is required on every install. Tanks without a return port need the hanger top or filler neck modified.\u003c\/li\u003e\n\u003cli\u003eThe pump outlet is 6AN male only.\u003c\/li\u003e\n\u003cli\u003eMount it away from crash-prone areas, heat sources and moving suspension parts.\u003c\/li\u003e\n\u003cli\u003eVerified pumps: Walbro F90000267, F90000274, F90000285, F90000295, GSS341, GSS342; AEM 50-1000, 50-1200, 50-1220; Bosch BR540; DeatschWerks DW400, DW440, DW810; Protec 11928; Fuelab 49614; Ti Automotive E5LM.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal – suits any vehicle with a suitable mounting location\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764998144302,"sku":"20-0960","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0960_a469dc14-e57f-4812-8f71-844c6d8bdd14.jpg?v=1792383635"},{"product_id":"radium-fuel-pump-hanger-toyota-chaser-mark-ii-cresta-jzx90-jzx100","title":"Radium Fuel Pump Hanger, Toyota Chaser \/ Mark II \/ Cresta (JZX90 \/ JZX100)","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Toyota Chaser \/ Mark II \/ Cresta (JZX90 \/ JZX100)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Toyota Chaser, Mark II and Cresta JZX90 \/ JZX100 (1JZ \/ 2JZ)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0940\u003c\/p\u003e\u003cp\u003eThe JZX90 and JZX100 are drift and street favourites here, and once a 1JZ is running a bigger turbo or E85 the factory pump is the first thing to run out. The Radium 20-0940 drops straight in place of the OEM hanger and carries one or two pumps, with adapter fittings to the factory fuel lines so there's no tank or line surgery.\u003c\/p\u003e\u003cp\u003eAn SAE quick connector is supplied for a second pump, and later cars with an inverted-flare feed line get a replacement PTFE feed hose in the box. High-current stainless studs, non-conductive acorn nuts and ETFE in-tank wiring mean the pumps get full voltage. Add the 20-0941 collector if you want starvation protection on a single-pump setup.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-single-pump-fuel-collector-add-on-toyota-chaser-mark-ii-cresta-jzx90-jzx100\"\u003eRadium Single Pump Fuel Collector Add-On – JZX90 \/ JZX100 (20-0941)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003eRadium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003eRadium Check Valve, 6AN ORB to 10mm Barb (20-1534)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-pump-outlet-adapter-check-valve-with-10mm-barb\"\u003eRadium Pump Outlet Adapter, Check Valve with 10mm Barb (20-0798)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-clamp-for-41-43mm-pump-bodies\"\u003eRadium Fuel Pump Clamp, 41–43mm Pump Bodies (20-0441)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps, check valves and relay kit are sold separately.\u003c\/li\u003e\n\u003cli\u003eSome pumps have no internal check valve (AEM 50-1230 \/ 50-1235, Walbro F90000295, Ti E5LM). Use 20-1533 or 20-1534 with those.\u003c\/li\u003e\n\u003cli\u003eWith the 20-0941 collector, only a single 39mm-body pump can be used (Bosch BR540 and DW400 excluded). 41–43mm bodies need the 20-0441 clamp.\u003c\/li\u003e\n\u003cli\u003eVerified pumps: Walbro F90000267, F90000274, F90000285, F90000295, GSS342; AEM 50-1000, 50-1200, 50-1230, 50-1235; Bosch BR540; DeatschWerks DW400, DW440, DW810; Protec 11928; Fuelab 49614; Ti Automotive E5LM.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota Chaser JZX90 \/ JZX100\u003c\/li\u003e\n\u003cli\u003eToyota Mark II JZX90 \/ JZX100\u003c\/li\u003e\n\u003cli\u003eToyota Cresta JZX90 \/ JZX100\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764998308142,"sku":"20-0940","price":960.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0940_360be073-e9e3-467d-a213-ac4619be9d9d.jpg?v=1792383634"},{"product_id":"radium-fuel-pump-hanger-honda-civic-eg-ek-integra-dc2-1992-2001","title":"Radium Fuel Pump Hanger, Honda Civic EG \/ EK \/ Integra DC2 (1992-2001)","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Honda Civic EG \/ EK \/ Integra DC2 (1992–2001)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Honda Civic EG \/ EK (1992–2000) and Integra DC2 (1994–2001)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0790-00 \/ 20-0792-00\u003c\/p\u003e\u003cp\u003eTurbo B-series and K-swapped Civics and Integras quickly outgrow the factory pump. The Radium hanger replaces the stock pump assembly with no cutting or tank modification, and the pump sits in Honda's factory collector bowl so it stays fed under hard cornering at the track or a hillclimb.\u003c\/p\u003e\u003cp\u003eThe top plate has an 8AN ORB outlet with fittings for both OEM and aftermarket feed lines, and a 4AN ORB return with fittings for the OEM or an aftermarket return. Everything clears the factory access cover. When you need more fuel for E85 or more boost, the Radium Dual Pump Add-On bolts on to run a second pump.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dual-fuel-pump-hanger-add-on-honda-civic-eg-ek-integra-dc2\"\u003eRadium Dual Pump Add-On – Civic EG \/ EK \/ Integra DC2 (20-0796-00 \/ 20-0797-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003eRadium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003eRadium Check Valve, 6AN ORB to 10mm Barb (20-1534)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pump is not included.\u003c\/li\u003e\n\u003cli\u003eAEM 50-1230, AEM 50-1235 and Walbro F90000295 have no internal check valve. Add 20-1533 or 20-1534 if required (these can't be used on a second pump).\u003c\/li\u003e\n\u003cli\u003eThe 8.5mm barbed adapter reuses the OEM feed line on 1994–95 Integra \/ 1992–95 Civic. The SAE quick connect reuses it on 1996–2001 Integra \/ 1996–2000 Civic.\u003c\/li\u003e\n\u003cli\u003e1996–2001 Integra and 1996–2000 Civic need the OEM return hose extended.\u003c\/li\u003e\n\u003cli\u003eA single Walbro GSS342 can reuse the OEM wiring, but upgraded wiring is recommended so the pump gets full voltage (one wiring kit per pump).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHonda Civic EG \/ EK (1992–2000), all models, RHD and LHD\u003c\/li\u003e\n\u003cli\u003eHonda Integra DC2 \/ DB (1994–2001), all models, RHD and LHD\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Honda \/ Walbro F90000267\/274\/285\/295","offer_id":67764998865198,"sku":"20-0792-00","price":427.99,"currency_code":"AUD","in_stock":true},{"title":"Honda \/ Walbro GSS342\/AEM 50-1200","offer_id":67764998897966,"sku":"20-0790-00","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0790.jpg?v=1792383639"},{"product_id":"radium-dual-fuel-pump-hanger-add-on-honda-civic-eg-ek-integra-dc2","title":"Radium Dual Fuel Pump Hanger Add-On, Honda Civic EG \/ EK \/ Integra DC2","description":"\u003ch2\u003eRadium Dual Pump Add-On – Honda Civic EG \/ EK \/ Integra DC2\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium Civic EG \/ EK (1992–2000) and Integra DC2 (1994–2001) hanger 20-0790-00 \/ 20-0792-00\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0796-00 \/ 20-0797-00\u003c\/p\u003e\u003cp\u003eHonda's collector bowl is too small to fit two Walbro-style pumps side by side, so Radium's add-on stacks them inline instead. It bolts onto the Radium Civic\/Integra hanger and lets a high-horsepower turbo or E85 build run a second pump without touching the tank.\u003c\/p\u003e\u003cp\u003eFitting it is simple: the rear pump goes in first and is held back with the supplied tool while the front pump slides in, then an electrical plug and SAE quick connect finish the job. Both pumps merge into the hanger's single 8AN ORB outlet, and integrated check valves let you stage the second pump on boost or with a pressure switch.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-hanger-honda-civic-eg-ek-integra-dc2-1992-2001\"\u003eRadium Fuel Pump Hanger – Civic EG \/ EK \/ Integra DC2 (20-0790-00 \/ 20-0792-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-adjustable-pressure-switch\"\u003eRadium Adjustable Pressure Switch (20-0236)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eRequires the Radium hanger: 20-0796-00 suits 20-0790-00, and 20-0797-00 suits 20-0792-00.\u003c\/li\u003e\n\u003cli\u003ePumps without an internal check valve (AEM 50-1230 \/ 50-1235, Walbro F90000295) aren't listed for the add-on, because the external check valves can't be used on the second pump.\u003c\/li\u003e\n\u003cli\u003eOne wiring kit per pump is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHonda Civic EG \/ EK (1992–2000) with Radium hanger\u003c\/li\u003e\n\u003cli\u003eHonda Integra DC2 \/ DB (1994–2001) with Radium hanger\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Honda \/ Walbro GSS342\/AEM 50-1200","offer_id":67764998930734,"sku":"20-0796-00","price":244.99,"currency_code":"AUD","in_stock":true},{"title":"Honda \/ Walbro F90000267\/274\/285\/295","offer_id":67764998963502,"sku":"20-0797-00","price":270.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0796.jpg?v=1792383639"},{"product_id":"radium-fuel-hanger-89-05-mazda-mx-5-pumps-not-included","title":"Radium Fuel Hanger, 89-05 Mazda MX-5, Pumps Not Included","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Mazda MX-5 NA \/ NB (1989–2005)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Mazda MX-5 NA (1989–1997) and NB (1999–2005), B6 \/ BP engines\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1020\u003c\/p\u003e\u003cp\u003eTurbo and supercharged MX-5s are everywhere at Australian club sprints and hillclimbs, and the factory pump module is usually the first thing holding them back. The Radium hanger replaces it with a billet unit that carries one or two aftermarket pumps, keeps the OEM fuel level sender and needs no changes under the access cover.\u003c\/p\u003e\u003cp\u003eThe factory baffle stays in place, and a one-piece anodised collector box with two 355 lph one-way fill valves keeps fuel around the pump inlets, topped up by regulator return. Billet extension brackets suit every tank variant, including the deeper later tanks, and year-specific fittings are supplied for both NA and NB lines.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fpr-ra-fuel-pressure-regulator-kit-mazda-mx-5-nb-99-05\"\u003eRadium FPR RA Fuel Pressure Regulator Kit – MX-5 NB (20-1022)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-plumbing-kit-mazda-mx-5-na-nb-stainless-filter\"\u003eRadium Fuel Hanger Plumbing Kit – MX-5 NA \/ NB, Stainless Filter (20-1025-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-plumbing-kit-mazda-mx-5-na-nb-microglass-filter\"\u003eRadium Fuel Hanger Plumbing Kit – MX-5 NA \/ NB, Microglass Filter (20-1025-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-pump-outlet-adapter-check-valve-with-10mm-barb\"\u003eRadium Pump Outlet Adapter, Check Valve with 10mm Barb (20-0798)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eNB (1999–2005): the OEM regulator is removed, so an aftermarket regulator is required. The 20-1022 FPR kit or 20-1025 plumbing kits are plug-and-play options.\u003c\/li\u003e\n\u003cli\u003eNA (1989–1997): the OEM regulator stays on the fuel rail.\u003c\/li\u003e\n\u003cli\u003eThe OEM post-pump filter is retained.\u003c\/li\u003e\n\u003cli\u003eTi Automotive E5LM pumps have no check valve, so staging two of them needs the 20-0798 outlet check valve.\u003c\/li\u003e\n\u003cli\u003eUpgraded wiring is recommended, one kit per pump. Other 39mm pumps may fit but aren't listed by Radium.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMazda MX-5 NA (1989–1997)\u003c\/li\u003e\n\u003cli\u003eMazda MX-5 NB (1999–2005)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764999029038,"sku":"20-1020","price":1065.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1020_afcf23f2-489b-4465-9a42-6a5292449851.jpg?v=1792383643"},{"product_id":"radium-extension-kit-for-fcst-x","title":"Radium Extension Kit for FCST-X","description":"\u003ch2\u003eRadium Extension Kit for FCST-X\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST-X fuel cell surge tank, 20-1990, 20-1991 and 20-1992 series\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1989\u003c\/p\u003e\u003cp\u003eIn a deep fuel cell, the last few litres are where starvation shows up – late in an endurance stint or on the final laps of a time attack session. This kit adds 1.2 litres to the FCST-X surge tank and drops the one-way fill valves lower in the cell, so the surge pumps stay covered right down to low fuel levels.\u003c\/p\u003e\u003cp\u003eAn anodised aluminium canister bolts in between the top plate and the existing surge canister, and a longer stainless pump bracket replaces the original. It makes the module 94mm taller, so it's meant for deeper cells like the Radium R14A and R22A.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-fuel-cell-surge-tank\"\u003eRadium FCST-X Fuel Cell Surge Tank (20-1990-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-14-0691-6an-orb-to-10mm-barb-fitting\"\u003eRadium 6AN ORB to 10mm Barb Fitting (14-0691)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-0614-ra-series-fuel-cell-14-gallon-53l-fia-sfi\"\u003eRadium RA-Series Fuel Cell, 53 L (20-0614)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-0622-ra-series-fuel-cell-22-gallon-83-3l-fia-sfi\"\u003eRadium RA-Series Fuel Cell, 83.3 L (20-0622)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFCST-X is sold separately.\u003c\/li\u003e\n\u003cli\u003eNeeds a fuel cell at least 274mm deep. Suits the Radium R14A (20-0614) and R22A (20-0622).\u003c\/li\u003e\n\u003cli\u003eNot compatible with Radium 6, 10 or 10.5 gallon RA-Series cells, or any FCST not listed below.\u003c\/li\u003e\n\u003cli\u003eSupplied loose for the end user to fit – Radium doesn't pre-assemble it on FCST-X units.\u003c\/li\u003e\n\u003cli\u003eThe 20-1991-00 (Bosch BR540 \/ DW400) version needs one 14-0691 fitting per surge pump to replace the outlet adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium FCST-X 20-1990-00, -01, -02, -03\u003c\/li\u003e\n\u003cli\u003eRadium FCST-X 20-1991-00 (with 14-0691 fittings)\u003c\/li\u003e\n\u003cli\u003eRadium FCST-X 20-1992-00, -01, -02, -03\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764999651630,"sku":"20-1989","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1989.jpg?v=1792383646"},{"product_id":"radium-fuel-pump-hanger-suit-aem-50-1220-dw440-holden-commodore-ve-vf-chevolet-camaro-ss-10-15","title":"Radium Fuel Pump Hanger Suit AEM 50-1220\/DW440 - Holden Commodore VE VF\/Chevolet Camaro SS 10-15","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Holden Commodore VE \/ VF (AEM 50-1220 \/ DW440)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Holden Commodore VE \/ VF, Caprice WM \/ WN, Chevrolet Camaro 2010–2015, Chevrolet SS, Cadillac CTS-V, Pontiac G8\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1320\u003c\/p\u003e\u003cp\u003eA blown or big-cam LS3 in a VE or VF Commodore will outrun the factory pump module long before it runs out of anything else. The Radium hanger replaces the whole module and carries one, two or three aftermarket pumps, so it'll take you from a mild street E85 tune right through to a serious drag build. All the OEM sensors are reused.\u003c\/p\u003e\u003cp\u003eA one-piece anodised collector box with three 355 lph one-way fill valves keeps the pumps fed, topped up by regulator return and the jet pump crossover. Each pump gets its own pre-filter chamber, and the restrictive OEM return is opened up so higher-flow pumps can breathe. The OEM regulator and post-pump filter are deleted, so you'll need an aftermarket regulator and filter.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-chevrolet-camaro-ls3-ls7-l99-2010-2015\"\u003eRadium Fuel Hanger Plumbing Kit – Camaro 2010–2015, Stainless Filter (20-1326-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-chevrolet-camaro-ls3-ls7-l99-2010-2015\"\u003eRadium Fuel Hanger Plumbing Kit – Camaro 2010–2015, Microglass Filter (20-1326-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-cadillac-cts-v\"\u003eRadium Fuel Hanger Plumbing Kit – CTS-V, Stainless Filter (20-1325-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-cadillac-cts-v\"\u003eRadium Fuel Hanger Plumbing Kit – CTS-V, Microglass Filter (20-1325-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps are not included. This version suits AEM 50-1220, DeatschWerks DW440 (brushless), Bosch 0 580 454 100 and stock CTS-V \/ VE \/ G8 pumps. For Walbro F900-series pumps, see 20-1322.\u003c\/li\u003e\n\u003cli\u003eThe OEM regulator and post-pump filter are removed – fit an aftermarket regulator and low-micron filter. The Camaro and CTS-V plumbing kits include both but need Radium fuel rails.\u003c\/li\u003e\n\u003cli\u003eFit a check valve if not using a plumbing kit, or fuel pressure may not hold after shut-down. The Bosch and stock CTS-V pumps have no internal check valve.\u003c\/li\u003e\n\u003cli\u003eThe OEM jet pump uses roughly 15–45 lph – allow for it when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eUpgraded wiring is recommended, one kit per pump.\u003c\/li\u003e\n\u003cli\u003eRadium lists the VE for 2008–2009 and VF for 2014–2017. Email us to confirm other build years.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolden Commodore VE (2008–2009)\u003c\/li\u003e\n\u003cli\u003eHolden Commodore VF (2014–2017)\u003c\/li\u003e\n\u003cli\u003eHolden Caprice (2009–2017)\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro (2010–2015)\u003c\/li\u003e\n\u003cli\u003eChevrolet SS (2014–2017)\u003c\/li\u003e\n\u003cli\u003eChevrolet Caprice PPV (2009–2017)\u003c\/li\u003e\n\u003cli\u003eChevrolet Omega (2008–2009)\u003c\/li\u003e\n\u003cli\u003eCadillac CTS (2008–2014) \/ CTS-V (2008–2015)\u003c\/li\u003e\n\u003cli\u003ePontiac G8 (2008–2009)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764999684398,"sku":"20-1320","price":1048.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1320_fd2bd38f-8f51-44c1-aa75-f649f7c66072.jpg?v=1792383646"},{"product_id":"radium-fuel-pump-hanger-suit-walbro-f90000267-274-285-holden-commodore-ve-vf-chevolet-camaro-ss-10-15","title":"Radium Fuel Pump Hanger Suit Walbro F90000267\/274\/285 - Holden Commodore VE VF\/Chevolet Camaro SS 10-15","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Holden Commodore VE \/ VF (Walbro F90000267 \/ 274 \/ 285)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Holden Commodore VE \/ VF, Caprice WM \/ WN, Chevrolet Camaro 2010–2015, Chevrolet SS, Cadillac CTS-V, Pontiac G8\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1322\u003c\/p\u003e\u003cp\u003eThis is the Walbro F900-series version of Radium's VE\/VF hanger, for LS-powered Commodores and Camaros making big power on boost or E85. It replaces the factory module, runs one, two or three pumps, and reuses all the OEM sensors. With the 13-1187 base it also takes the popular 12mm brushless pumps.\u003c\/p\u003e\u003cp\u003eA one-piece anodised collector box with three 355 lph one-way fill valves keeps the pumps fed, topped up by regulator return and the jet pump crossover. Each pump gets its own pre-filter chamber, and the restrictive OEM return is opened up for higher-flow pumps. The OEM regulator and post-pump filter are deleted, so an aftermarket regulator and filter are needed.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-filter-base-adapter-12mm-brushless-pumps-13-1187\"\u003eRadium Fuel Pump Filter Base Adapter, 12mm Brushless Pumps (13-1187)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-chevrolet-camaro-ls3-ls7-l99-2010-2015\"\u003eRadium Fuel Hanger Plumbing Kit – Camaro 2010–2015, Stainless Filter (20-1326-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-chevrolet-camaro-ls3-ls7-l99-2010-2015\"\u003eRadium Fuel Hanger Plumbing Kit – Camaro 2010–2015, Microglass Filter (20-1326-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-cadillac-cts-v\"\u003eRadium Fuel Hanger Plumbing Kit – CTS-V, Stainless Filter (20-1325-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-cadillac-cts-v\"\u003eRadium Fuel Hanger Plumbing Kit – CTS-V, Microglass Filter (20-1325-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps are not included. For AEM 50-1220 \/ DW440 pumps, see 20-1320.\u003c\/li\u003e\n\u003cli\u003eProtec 11928, Fuelab 49614 and DeatschWerks DW810 pumps don't fit the included strainer and need the 13-1187 base (sold separately).\u003c\/li\u003e\n\u003cli\u003eThe OEM regulator and post-pump filter are removed – fit an aftermarket regulator and low-micron filter. The Camaro and CTS-V plumbing kits include both but need Radium fuel rails.\u003c\/li\u003e\n\u003cli\u003eFit a check valve if not using a plumbing kit, or fuel pressure may not hold after shut-down.\u003c\/li\u003e\n\u003cli\u003eThe OEM jet pump uses roughly 15–45 lph – allow for it when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eUpgraded wiring is recommended, one kit per pump.\u003c\/li\u003e\n\u003cli\u003eRadium lists the VE for 2008–2009 and VF for 2014–2017. Email us to confirm other build years.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolden Commodore VE (2008–2009)\u003c\/li\u003e\n\u003cli\u003eHolden Commodore VF (2014–2017)\u003c\/li\u003e\n\u003cli\u003eHolden Caprice (2009–2017)\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro (2010–2015)\u003c\/li\u003e\n\u003cli\u003eChevrolet SS (2014–2017)\u003c\/li\u003e\n\u003cli\u003eChevrolet Caprice PPV (2009–2017)\u003c\/li\u003e\n\u003cli\u003eChevrolet Omega (2008–2009)\u003c\/li\u003e\n\u003cli\u003eCadillac CTS (2008–2014) \/ CTS-V (2008–2015)\u003c\/li\u003e\n\u003cli\u003ePontiac G8 (2008–2009)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764999717166,"sku":"20-1322","price":1135.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1322_a9ec112c-e056-412f-8f47-1e77267f4de1.jpg?v=1792383647"},{"product_id":"radium-fuel-pump-hanger-subaru-brz-toyota-86-2012-2021","title":"Radium Fuel Pump Hanger, Subaru BRZ \/ Toyota 86 (2012-2021)","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Toyota 86 \/ Subaru BRZ (2012–2021)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Toyota 86 \/ GT86 ZN6 (2012–2021), Subaru BRZ ZC6 (2012–2020), Scion FR-S, FA20 engine\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1073\u003c\/p\u003e\u003cp\u003eTurbo and supercharger kits are a common path for 86 and BRZ owners here, and E85 on the FA20 quickly maxes out the factory pump. The Radium hanger replaces the in-tank module, carries one or two aftermarket pumps and keeps the OEM fuel level sender, so you can step up from a mild street build to a serious time attack setup on the same hardware.\u003c\/p\u003e\u003cp\u003eA one-piece anodised collector box with a 355 lph one-way fill valve keeps fuel at the pump inlets, topped up by regulator return, and a redesigned jet pump siphon cuts return restriction. Both pumps merge into a single 8AN ORB outlet. The OEM regulator and post-pump filter are deleted, so you'll need an aftermarket regulator and filter – Radium's 20-0966 plumbing kits cover both.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-subaru-brz-toyota-86\"\u003eRadium Fuel Hanger Plumbing Kit – 86 \/ BRZ, Stainless Filter (20-0966-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-subaru-brz-toyota-86\"\u003eRadium Fuel Hanger Plumbing Kit – 86 \/ BRZ, Microglass Filter (20-0966-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eAn aftermarket regulator and low-micron filter are required – both come in the 20-0966 plumbing kits, along with a check valve filter so pressure holds after shut-down.\u003c\/li\u003e\n\u003cli\u003eThe 20-0966 plumbing kits don't suit automatic cars (filter\/regulator mounting interference).\u003c\/li\u003e\n\u003cli\u003eThe jet pump uses roughly 15–45 lph – allow for it when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eUpgraded wiring is recommended, one kit per pump.\u003c\/li\u003e\n\u003cli\u003eVerified pumps: Walbro F90000267, F90000274, F90000285; DeatschWerks DW440; Fuelab 49614; Protec 11928. Other pumps may fit but aren't verified by Radium.\u003c\/li\u003e\n\u003cli\u003eDoesn't suit the second-generation GR86 \/ BRZ (ZN8 \/ ZD8) – see 20-1074.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota 86 \/ GT86 ZN6 (2012–2021)\u003c\/li\u003e\n\u003cli\u003eSubaru BRZ ZC6 (2012–2020)\u003c\/li\u003e\n\u003cli\u003eScion FR-S (2012–2016)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765000175918,"sku":"20-1073","price":925.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1073.jpg?v=1792383647"},{"product_id":"radium-fstr-ra-fuel-surge-tank-w-integrated-fpr-fuel-pressure-regulator","title":"Radium FSTR RA Fuel Surge Tank w\/Integrated FPR Fuel Pressure Regulator","description":"\u003ch2\u003eRadium FST-R RA Fuel Surge Tank with Integrated Regulator\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal – any EFI build needing a stable fuel supply\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1933\u003c\/p\u003e\u003cp\u003eThe FST-R does the same job as a standard surge tank – keeping the engine fed when poor tank baffling lets the main pump suck air in corners or under brakes – but with an RA-series fuel pressure regulator built into the top cap. Excess fuel goes straight back to the main tank, so you lose an external regulator, a handful of fittings and a couple of hoses, and the fuel in the system runs cooler. It's a tidy way to upgrade the pump in a drift car, time attack build or street E85 car without touching the factory tank.\u003c\/p\u003e\u003cp\u003ePressure is set by hand with detents of about 1 psi per click, and the swivelling, double O-ring sealed vacuum port lets you run 1:1 boost reference or stay static. An internal flow deflector stops foaming and aeration, and the whole unit is CNC-machined, anodised aluminium with FKM seals and stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-surge-tank-mounting-bracket-universal-side-floor-mount\"\u003eRadium FST Mounting Bracket, Universal Side \/ Floor (13-0054)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-8-5mm-barb\"\u003eRadium Check Valve, 6AN ORB to 8.5mm Barb (20-1533)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-check-valve-6an-orb-to-10mm-barb\"\u003eRadium Check Valve, 6AN ORB to 10mm Barb (20-1534)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pressure-gauge-w-6an-inline-adapter\"\u003eRadium Fuel Pressure Gauge with 6AN Inline Adapter (20-0152)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pump is not included. Single-pump design only – there's no dual-pump version.\u003c\/li\u003e\n\u003cli\u003eA fuel pressure gauge or sensor is needed to set and monitor pressure. Fit it anywhere between the regulated outlet and the rail(s).\u003c\/li\u003e\n\u003cli\u003eA relay kit is recommended to drive the internal pump.\u003c\/li\u003e\n\u003cli\u003eAEM 50-1230 \/ 50-1235 have no check valve (use 20-1533). Walbro F90000295, Bosch BR540 and Ti E5LM have no check valve (use 20-1534).\u003c\/li\u003e\n\u003cli\u003eMount it away from heat, moving and suspension parts, and crash-prone areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal – suits any vehicle with a suitable mounting location\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765000241454,"sku":"20-1933","price":925.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1933_da197977-38e0-4923-a23a-4e345eac35d2.jpg?v=1792383647"},{"product_id":"radium-fuel-pump-hanger-mitsubishi-evo-7-9","title":"Radium Fuel Pump Hanger - Mitsubishi Evo 7-9","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Mitsubishi Lancer Evolution VII–IX\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Mitsubishi Lancer Evolution VII, VIII and IX (4G63T)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1340 \/ 20-1342\u003c\/p\u003e\u003cp\u003eEvo 7–9s are still a staple at Australian time attack and drag events, and big turbos on E85 need far more fuel than the stock pump setup can deliver. The Radium hanger drops in place of the OEM hold-down flange and runs one or two aftermarket pumps in the factory tank, with pre-assembled 8AN outlet and 6AN return fittings that work with the OEM lines.\u003c\/p\u003e\u003cp\u003eThe factory return port and jet pump are too restrictive for high-flow pumps and push rail pressure up. Radium's jet pump has a built-in pressure relief valve to fix that, while returning fuel still keeps the OEM tank baffle full so the pumps don't starve on hard corners.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-w-filter-mitsubishi-evo-7-9\"\u003eRadium Fuel Hanger Plumbing Kit with Filter – Evo 7–9 (20-0376-03 \/ -05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eThe OEM post-pump filter is deleted. Without the plumbing kit, fit a low-micron filter downstream to protect the injectors.\u003c\/li\u003e\n\u003cli\u003eThe 20-0376 plumbing kit needs an aftermarket fuel rail and regulator (sold separately).\u003c\/li\u003e\n\u003cli\u003eOne wiring kit per pump is recommended for high-flow pumps.\u003c\/li\u003e\n\u003cli\u003eOther similar pumps may fit but aren't verified by Radium.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VII\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VIII\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution IX\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro F90000267\/274\/285","offer_id":67765000274222,"sku":"20-1342","price":821.99,"currency_code":"AUD","in_stock":true},{"title":"AEM 50-1220 \/ DW440","offer_id":67765000306990,"sku":"20-1340","price":786.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-134_472c2ef8-6969-49f6-a49b-9b1b1e09c096.jpg?v=1792383648"},{"product_id":"radium-fuel-pump-hanger-suit-walbro-460-525-535-subaru-brz-zd8-toyota-gr86-zn8-22","title":"Radium Fuel Pump Hanger Suit Walbro 460\/525\/535 - Subaru BRZ ZD8 \u0026 Toyota GR86 ZN8 22+","description":"\u003ch2\u003eRadium Fuel Pump Hanger – Toyota GR86 \/ Subaru BRZ (2022+)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Toyota GR86 ZN8 and Subaru BRZ ZD8 (2022+), FA24 engine\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1074\u003c\/p\u003e\u003cp\u003eThe FA24 in the new GR86 and BRZ responds well to boost and E85, but the factory in-tank module runs out quickly once you go past a mild tune. The Radium hanger replaces it, carries one or two aftermarket pumps and keeps the OEM fuel level sender, so the same hanger takes you from a street build through to a full time attack or drift car.\u003c\/p\u003e\u003cp\u003eA one-piece anodised collector box with a 355 lph one-way fill valve keeps fuel at the pump inlets, topped up by regulator return, and a redesigned jet pump siphon cuts return restriction. Both pumps merge into a single 8AN ORB outlet. The OEM regulator and post-pump filter are deleted, so you'll need an aftermarket regulator and filter – Radium's 20-0966 plumbing kits cover both.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-stainless-filter-subaru-brz-toyota-86\"\u003eRadium Fuel Hanger Plumbing Kit – 86 \/ BRZ, Stainless Filter (20-0966-03)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-plumbing-kit-with-microglass-filter-subaru-brz-toyota-86\"\u003eRadium Fuel Hanger Plumbing Kit – 86 \/ BRZ, Microglass Filter (20-0966-05)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-filter-base-adapter-12mm-brushless-pumps-13-1187\"\u003eRadium Fuel Pump Filter Base Adapter, 12mm Brushless Pumps (13-1187)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps are not included.\u003c\/li\u003e\n\u003cli\u003eAn aftermarket regulator and low-micron filter are required – both come in the 20-0966 plumbing kits, along with a check valve filter so pressure holds after shut-down.\u003c\/li\u003e\n\u003cli\u003eThe 20-0966 plumbing kits don't suit automatic cars (filter\/regulator mounting interference).\u003c\/li\u003e\n\u003cli\u003eThe jet pump uses roughly 15–45 lph – allow for it when sizing pumps.\u003c\/li\u003e\n\u003cli\u003eUpgraded wiring is recommended, one kit per pump.\u003c\/li\u003e\n\u003cli\u003eVerified pumps: Walbro F90000267, F90000274, F90000285; DeatschWerks DW440, DW810; Fuelab 49614; Protec 11928. Other pumps may fit but aren't verified by Radium.\u003c\/li\u003e\n\u003cli\u003eFor the first-generation 86 \/ BRZ (ZN6 \/ ZC6), see 20-1073.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota GR86 ZN8 (2022+)\u003c\/li\u003e\n\u003cli\u003eSubaru BRZ ZD8 (2022+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765000339758,"sku":"20-1074","price":925.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1074.jpg?v=1792383648"},{"product_id":"radium-fcst-x-fuel-cell-surge-tank","title":"Radium FCST-X, Fuel Cell Surge Tank","description":"\u003ch2\u003eRadium FCST-X Fuel Cell Surge Tank\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal – fuel cells with a standard 6 x 10in 24-bolt top flange\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1990-00 \/ 20-1991-00 \/ 20-1992-00 \/ 20-1993-00 \/ 20-1995-00\u003c\/p\u003e\u003cp\u003eThe FCST-X is the latest version of Radium's fuel cell surge tank, refined over ten years of use in drag, drift and time attack cars. A lift pump pulls fuel from the bottom of the cell into the surge canister, where up to three EFI pumps feed the engine. If the lift pump uncovers on a long corner or a hard launch, the canister keeps the surge pumps fed, and regulator return tops it up as well.\u003c\/p\u003e\u003cp\u003eInside, three separate filter chambers keep each pump's supply isolated, so unused ports don't need blocking. Three one-way FKM fill valves (1065 lph combined) refill the canister from the cell, with excess overflowing back. The whole module drops in and lifts out as one unit, and it takes up to four brushless pumps, 16AN-inlet mechanical pumps and shrouded level senders.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-extension-kit-for-fcst-x\"\u003eRadium Extension Kit for FCST-X (20-1989)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-lift-pump-mounts-universal-all-depths\"\u003eRadium FCST-X Lift Pump Mounts – Universal All Depths (20-1214)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-filter-base-adapter-12mm-brushless-pumps-13-1187\"\u003eRadium Fuel Pump Filter Base Adapter, 12mm Brushless Pumps (13-1187)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-pump-inlet-filter-sock\"\u003eRadium Fuel Pump Inlet Filter Sock (14-0143)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-quick-fill-internal\"\u003eRadium DSV 12AN ORB to 12AN Male – Quick Fill (20-0535)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-switch-plus-diagnostic-indicator\"\u003eRadium Fuel Level Switch Plus Diagnostic Indicator (20-0519)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps, fuel cell, filler, vent hose \/ filter and level sender are not included (a block-off plate is supplied in place of the sender).\u003c\/li\u003e\n\u003cli\u003eFits any cell with a standard 6 x 10in 24-bolt top flange and at least 196mm depth. Set the lift pump height to suit the cell – cells deeper than 323mm need Radium lift pump mounts.\u003c\/li\u003e\n\u003cli\u003e20-1991-00: the Bosch BR540 has no check valve, so multiple surge pumps must run together rather than staged.\u003c\/li\u003e\n\u003cli\u003e20-1992-00: Protec, Fuelab and DW810 need the 13-1187 base; the F90000295 must run with the other surge pumps, not staged.\u003c\/li\u003e\n\u003cli\u003e20-1993-00: Ti E5LM pumps need a BKS1001 brushless controller.\u003c\/li\u003e\n\u003cli\u003e20-1995-00 has no internal surge pumps and needs an internal Walbro F900-series lift pump plus an external filter.\u003c\/li\u003e\n\u003cli\u003eThe 20-1989 extension kit doesn't suit 20-1993-00 or 20-1995-00.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal – all Radium fuel cells and any cell with a 6 x 10in 24-bolt top flange\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342\/AEM 50-1200\/50-1220","offer_id":67765000372526,"sku":"20-1990-00","price":1572.99,"currency_code":"AUD","in_stock":true},{"title":"Walbro F90000267\/274\/285\/295","offer_id":67765000405294,"sku":"20-1992-00","price":1572.99,"currency_code":"AUD","in_stock":true},{"title":"Bosch BR540 or DW400 20-1441","offer_id":67765000438062,"sku":"20-1991-00","price":1572.99,"currency_code":"AUD","in_stock":true},{"title":"Ti Automotive E5LM","offer_id":67765000470830,"sku":"20-1993-00","price":1572.99,"currency_code":"AUD","in_stock":true},{"title":"External Pumps","offer_id":67765000503598,"sku":"20-1995-00","price":1484.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-199.jpg?v=1792383648"},{"product_id":"radium-engineering-fhst-nissan-370z-z-400z-walbro-f90000267-274-285-compatible-no-pumps","title":"Radium Engineering FHST - Nissan 370Z \u0026 Z (400Z) | Walbro F90000267\/274\/285 Compatible (No Pumps)","description":"\u003ch2\u003eRadium Fuel Hanger Surge Tank (FHST) – Nissan 370Z \/ Z (Walbro F900)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Nissan 370Z Z34 (2009–2020) and Nissan Z RZ34 (2023+), RHD and LHD\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1822\u003c\/p\u003e\u003cp\u003eThe saddle-bag tank in the 370Z and new Z is well known for starving under hard driving – exactly what happens at a track day or a time attack round once you're on sticky tyres. The Radium FHST puts a surge tank collector inside the opposite side of the factory tank, working with the OEM module and jet pumps, so you get proper starvation protection without a separate surge tank eating into the cabin or boot.\u003c\/p\u003e\u003cp\u003eIt runs one or two aftermarket surge pumps and has an RA-series regulator built in: hook up the vacuum reference for 1:1 boost-referenced pressure on a turbo or supercharged build, or leave it plugged for constant pressure. A gauge is supplied, there's no cutting, grinding or bending, and it's fine on E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-diy-fuel-pump-hard-wiring-kit\"\u003eRadium DIY Fuel Pump Hard Wiring Kit (17-0031)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-1000-0808-low-profile-swivel-banjo-fitting-8an-orb-to-8an-male\"\u003eRadium Low Profile Swivel Banjo, 8AN ORB to 8AN Male (20-1000-0808)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-hanger-fpr-block-off-plate-ford-mustang-s197-s550-11\"\u003eRadium Fuel Hanger FPR Block-Off Plate (20-0806)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-20-1000-0606-low-profile-swivel-banjo-fitting-6an-orb-to-6an-male\"\u003eRadium Low Profile Swivel Banjo, 6AN ORB to 6AN Male (20-1000-0606)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel pumps are not included. This version suits Walbro F90000267 \/ 274 \/ 285.\u003c\/li\u003e\n\u003cli\u003eThe OEM module pump must be upgraded to at least 340 lph at 40 psi.\u003c\/li\u003e\n\u003cli\u003eKeep the OEM venturi system as is – don't modify the OEM regulator or jet pumps. The Radium regulator should be the only regulator in the system.\u003c\/li\u003e\n\u003cli\u003eThe fuel gauge won't read accurately, although starvation won't occur early.\u003c\/li\u003e\n\u003cli\u003eThe FHST \"IN\" fitting can't be changed (it contains a venturi); the \"OUT\" fitting can.\u003c\/li\u003e\n\u003cli\u003eThe OEM post-pump filter stays. A downstream aftermarket filter is recommended but not required.\u003c\/li\u003e\n\u003cli\u003eA second surge pump needs the 17-0031 wiring kit. The 20-0806 block-off plate disables the built-in regulator and needs a downstream regulator (not covered in the instructions).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 370Z Z34 (2009–2020), RHD and LHD\u003c\/li\u003e\n\u003cli\u003eNissan Z RZ34 (2023+), RHD and LHD\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765000601902,"sku":"20-1822","price":1310.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1822_bea012af-aeaf-425d-9b90-dcf4aa236cbf.jpg?v=1792383651"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/collections\/moody-fuel-systems-collection-tile.png?v=1793152259","url":"https:\/\/radiumengineering.com.au\/collections\/fuel-surge-tanks-hangers.oembed?page=5","provider":"Radium Engineering Australia","version":"1.0","type":"link"}