{"title":"Fuel filling accessories","description":"","products":[{"product_id":"radium-remote-mount-fill-neck-straight-1-5-barb","title":"Radium Remote Mount Fill Neck - Straight - 1.5\" Barb","description":"\u003ch2\u003eRadium Remote Mount Fill Neck, Straight, 1.5\" Barb\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST fuel cell surge tanks with the 6-bolt fill flange\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0527\u003c\/p\u003e\u003cp\u003eA remote fuel filler setup has three parts: the filler on the body, the fill neck on the fuel cell, and the hose joining them. This is the fill neck. It bolts to the 6-bolt flange on the original Radium FCST and takes 1.5\" (38mm) ID filler hose on a straight barb. It seals with an FKM gasket and has an FKM flapper valve, and it suits petrol, diesel, AV gas, methanol, ethanol and E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5in-clear\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\", Clear (20-0602)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-gasket-for-6-bolt-fill-neck-2-18-bc\"\u003eRadium Gasket for 6-Bolt Fill Neck, 2.18\" BC (18-0019)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-fuel-cell-surge-tank-fill-neck-block-off-kit\"\u003eRadium FCST Fill Neck Block Off Kit (20-0360)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOriginal FCST only. The FCST-X uses 3-bolt fill necks (20-1027 \/ 20-1047)\u003c\/li\u003e\n\u003cli\u003eBody-mounted remote filler and hose sold separately\u003c\/li\u003e\n\u003cli\u003eRadium remote fillers need a 77mm (3.03\") hole in the body panel\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST 20-014X-XX, 20-049X-XX, 20-069X-XX and 20-099X-XX\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764928938286,"sku":"20-0527","price":139.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0527.jpg?v=1792383274"},{"product_id":"radium-plastic-vent-flip-cap","title":"Radium Plastic Vent Flip Cap","description":"\u003ch2\u003eRadium Plastic Vent Flip Cap\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium quick fill dump cans, or universal for fuel jugs and cans\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0571\u003c\/p\u003e\u003cp\u003eThe industry-standard black plastic vent flip cap used on every Radium quick fill dump can, sold as a replacement. You can also add it to a non-vented plastic jug or metal fuel can: drill a 12.3mm (31\/64\") hole and press it in.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-standard-filler\"\u003eRadium Quick Fill Dump Can, Standard Filler (20-0697-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-1-5-dry-break-prv\"\u003eRadium Quick Fill Dump Can, 1.5\" Dry Break, with PRV (20-1697-01)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNeeds a 12.3mm (31\/64\") hole to install\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764938965294,"sku":"14-0571","price":8.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-0571.jpg?v=1792383337"},{"product_id":"radium-27mm-dry-break-an-couplers","title":"Radium 27mm Dry Break AN Couplers","description":"\u003ch2\u003eRadium 27mm Dry Break AN Couplers, 6AN \/ 8AN\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, 6AN and 8AN fuel and oil lines\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 14-0300 (6AN outer), 14-0301 (6AN inner), 20-0250 (6AN set), 14-0302 (8AN outer), 14-0303 (8AN inner), 20-0251 (8AN set)\u003c\/p\u003e\u003cp\u003eDry break couplers let you split a fuel or oil line without leaking and keep it under pressure, which is handy for removable components or quick engine and tank swaps. A knurled bayonet lock means you just push and twist to connect or disconnect, and no air gets in on reconnection. Buy the inner or outer half on its own, or a complete set. The 6AN and 8AN halves interchange, so you can step up or down a hose size. Radium tested them at 150 psi, connected and disconnected.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-e85-safe-reinforced-pcv-fuel-hose-sold-per-foot\"\u003eRadium E85-Safe Reinforced PCV\/Fuel Hose, Sold per Foot (20-HOSE)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with methanol\u003c\/li\u003e\n\u003cli\u003eFlow is the same in both directions, so they can go in either way\u003c\/li\u003e\n\u003cli\u003eThe higher the pressure, the harder they are to connect and disconnect. Never disconnect with the pumps running\u003c\/li\u003e\n\u003cli\u003eExpect a small pressure drop and a few drops of fluid when connecting or disconnecting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"6AN Outer","offer_id":67764939325742,"sku":"14-0300","price":96.0,"currency_code":"AUD","in_stock":true},{"title":"6AN Inner","offer_id":67764939358510,"sku":"14-0301","price":96.0,"currency_code":"AUD","in_stock":true},{"title":"8AN Outer","offer_id":67764939391278,"sku":"14-0302","price":96.0,"currency_code":"AUD","in_stock":true},{"title":"8AN Inner","offer_id":67764939424046,"sku":"14-0303","price":96.0,"currency_code":"AUD","in_stock":true},{"title":"6AN Set","offer_id":67764939456814,"sku":"20-0250","price":195.0,"currency_code":"AUD","in_stock":true},{"title":"8AN Set","offer_id":67764939489582,"sku":"20-0251","price":195.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/14-030_012131b8-6bc7-489b-b0e0-8a7c8e732c0b.jpg?v=1792383337"},{"product_id":"radium-dump-can-dry-break-probe-cover","title":"Radium Dump Can Dry Break Probe Cover","description":"\u003ch2\u003eRadium Dump Can Dry Break Probe Cover\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e 1.5\" male dry break probes, including Radium 20-0496 and 20-0996\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 15-0004\u003c\/p\u003e\u003cp\u003eKeeps dust and grit off the moving parts of a 1.5\" dry break probe between fills, which matters on a dusty pit lane. It's polyurethane leather, so it won't dry out or soak up fuel or water and wipes clean. An internal elastic band stops it blowing off in the wind. It slips over the probe like a sock and pulls off with the built-in handle.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-1-5-dry-break-filler-male\"\u003eRadium Quick Fill Dump Can, 1.5\" Dry Break Filler, Male (20-0496)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-male-prv\"\u003eRadium Dry Break, 1.5\", Male, PRV (20-0996)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCover only. Dump can and dry break not included\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764941357358,"sku":"15-0004","price":52.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/15-0004.jpg?v=1792383347"},{"product_id":"radium-vented-fill-neck-cap-only","title":"Radium Vented Fill Neck Cap Only","description":"\u003ch2\u003eRadium Vented Fill Neck Cap Only\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium 3-bolt direct mount fillers and discontinued 6-bolt direct fillers\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0148-V\u003c\/p\u003e\u003cp\u003eThe replacement vented cap for Radium direct mount fuel fillers, the ones that bolt straight onto a Radium fuel cell surge tank. It fits every 3-bolt direct filler and the discontinued 6-bolt versions, seals with an O-ring and comes with hardware for the tether.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-direct-mount-fill-neck-and-cap-vented\"\u003eRadium FCST-X 3-Bolt Direct Mount Fill Neck and Cap, Vented (20-1197-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-non-vented-fill-neck-cap-only\"\u003eRadium Non-Vented Fill Neck Cap Only (20-0148)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLightly oil the cap O-ring before fitting\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium 3-bolt direct mount fillers (e.g. 20-1197-V)\u003c\/li\u003e\n\u003cli\u003eRadium discontinued 6-bolt direct mount fillers (e.g. 20-0197-V)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764950204718,"sku":"20-0148-V","price":61.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0148-V.jpg?v=1792383395"},{"product_id":"radium-rear-clamshell-shim-kit-lotus-exige-all","title":"Radium Rear Clamshell Shim Kit - Lotus Exige (All)","description":"\u003ch2\u003eRadium Rear Clamshell Shim Kit, Lotus Exige\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Lotus Exige and Exige S\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0055\u003c\/p\u003e\u003cp\u003eReplaces the Exige's factory steel body shims, which are only taped to the rear subframe. They lose their grip, slip out of line with the four through-holes and get lost. Radium's shims are laser cut from 5052 aluminium, media blasted and black anodised, and each one is held by a countersunk screw and locking pinch nut. They're 73% lighter. The manual covers clamshell removal, fitting the shims, and further changes that cut future removal to 10 minutes or less.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-modular-rear-clam-kit-lotus-elise-2zz-ge\"\u003eRadium Modular Rear Clam Kit, Lotus Elise S2 (20-0051-01)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe first clamshell removal takes around 1.5–2 hours\u003c\/li\u003e\n\u003cli\u003eShim thickness may differ slightly from the factory stack, with no noticeable change in body fit\u003c\/li\u003e\n\u003cli\u003eRadium's instructions cover 2006+ models. Installation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLotus Exige \/ Exige S\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your car? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764955119918,"sku":"20-0055","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0055_6c72a0ea-93d4-4a39-b323-f548701813ae.jpg?v=1792383407"},{"product_id":"radium-fcst-fuel-cell-surge-tank-fill-neck-block-off-kit","title":"Radium FCST Fuel Cell Surge Tank Fill Neck Block Off Kit","description":"\u003ch2\u003eRadium FCST Fill Neck Block Off Kit, 6-Bolt\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST fuel cell surge tanks with the 6-bolt filler (not FCST-X)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0360\u003c\/p\u003e\u003cp\u003eSeals off the filler hole on an original Radium FCST, for when the tank is filled some other way or the filler is moved elsewhere. It's a 3mm (1\/8\") anodised aluminium plate with an FKM flange seal and stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-fill-neck-block-off-kit\"\u003eRadium FCST-X Fill Neck Block Off Kit (20-1060)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoesn't fit the FCST-X. Use the 20-1060 for FCST-X tanks\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST (6-bolt filler)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764962853166,"sku":"20-0360","price":61.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0360.jpg?v=1792383459"},{"product_id":"radium-12an-orb-5-bolt-sae-adapter","title":"Radium 12AN ORB 5-Bolt SAE Adapter","description":"\u003ch2\u003eRadium 12AN ORB 5-Bolt Vent Adapter, Older FCST\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Older-generation Radium FCST fuel cell surge tanks (20-014X-XX)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0439\u003c\/p\u003e\u003cp\u003eThe early Radium FCSTs (20-014X-XX) were built with a small vent port. This adapter bolts to the 5-bolt flange and gives you a 12AN ORB port, so you can run Radium's higher-flow 12AN vent parts on those tanks. It comes with a gasket and mounting hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kit-12an\"\u003eRadium Fuel Cell Vent Kit, 12AN (20-0484-12)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-12an-female-fitting-to-air-filter\"\u003eRadium 12AN Female Fitting to Air Filter (20-0485)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA fuel level sender can't be fitted while this adapter is in place\u003c\/li\u003e\n\u003cli\u003eOlder FCST (20-014X-XX) only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST, older generation (20-014X-XX)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764963705134,"sku":"20-0439","price":61.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0439.jpg?v=1792383460"},{"product_id":"radium-12an-female-fitting-to-air-filter","title":"Radium 12AN Female Fitting to Air Filter","description":"\u003ch2\u003eRadium 12AN Female Fitting to Air Filter\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, fuel cells with a direct fill cap and a 12AN male vent fitting\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0485\u003c\/p\u003e\u003cp\u003eA compact filtered vent that screws straight onto a 12AN male vent fitting, often a Radium 12AN DSV. It's a 12AN female to 3\/4\" barb fitting with a Radium air filter on top.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kit-12an\"\u003eRadium Fuel Cell Vent Kit, 12AN (20-0484-12)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-12an-orb-5-bolt-sae-adapter\"\u003eRadium 12AN ORB 5-Bolt Vent Adapter, Older FCST (20-0439)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor direct fill caps only, not remote fillers. The top of the fill tube must not sit higher than the filter\u003c\/li\u003e\n\u003cli\u003eNeeds a 12AN male vent fitting, such as the Radium 20-0462 12AN DSV. Email us to order one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764968128814,"sku":"20-0485","price":78.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0485.jpg?v=1792383485"},{"product_id":"radium-dry-break-1-5-female-direct-mount-vented","title":"Radium Dry Break 1.5\" Female, Direct Mount, Vented","description":"\u003ch2\u003eRadium Dry Break, 1.5\" Female, Direct Mount, Vented\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Older Radium FCST, and any fuel cell with a 6-bolt, 55.4mm (2.18\") PCD flange (not FCST-X)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0495-V\u003c\/p\u003e\u003cp\u003eA vented 1.5\" female dry break that bolts straight onto the fuel cell, for fast, spill-free refuelling from a dump can. It fits any 6-bolt flange with a 55.4mm (2.18\") bolt circle, the pattern used on the older Radium FCST, and takes the 1.5\" probe on Radium's 20-0496 and 20-0996 dump cans. Seals and materials suit petrol, diesel, AV gas, methanol, ethanol and E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-1-5-dry-break-filler-male\"\u003eRadium Quick Fill Dump Can, 1.5\" Dry Break Filler, Male (20-0496)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-male-prv\"\u003eRadium Dry Break, 1.5\", Male, PRV (20-0996)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-filler-replacement-dust-cap\"\u003eRadium Dry Break Filler Replacement Dust Cap (20-0604)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoesn't fit the FCST-X\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium FCST (older 6-bolt flange)\u003c\/li\u003e\n\u003cli\u003eAny fuel cell with a 6-bolt, 55.4mm (2.18\") PCD flange\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Default Title","offer_id":67764974420270,"sku":"20-0495-V","price":241.27,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0495-V.jpg?v=1792383517"},{"product_id":"radium-fuel-cell-vent-kit-12an","title":"Radium Fuel Cell Vent Kit - 12AN","description":"\u003ch2\u003eRadium Fuel Cell Vent Kit, 12AN\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, fuel cells with a 12AN male vent fitting, including Radium FCST and FCST-X\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0484-12\u003c\/p\u003e\u003cp\u003eA fuel cell vent lets air out as the cell fills and lets filtered air back in as fuel is used, so the tank never pressurises. This is Radium's high-flow version, for quick-fill systems with a dry break and dump can. The kit has a 12AN PushLok hose end, a Radium air filter, 1.83m (6ft) of 3\/4\" hose and a hose union. Radium says it works well with its charcoal canister kits.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kit-8an\"\u003eRadium Fuel Cell Vent Kit, 8AN (20-0484-08)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-12an-orb-5-bolt-sae-adapter\"\u003eRadium 12AN ORB 5-Bolt Vent Adapter, Older FCST (20-0439)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds a 12AN male vent fitting. On Radium FCST and FCST-X tanks that's the 20-0462 12AN DSV. Email us to order one\u003c\/li\u003e\n\u003cli\u003eRun the hose up from the cell so fuel drains back, then briefly towards the front of the car to limit slosh\u003c\/li\u003e\n\u003cli\u003eAdd vertical loops as expansion chambers, keeping the total height at about 305mm (12\") or more. On remote-fill systems, the loops must sit above the fill point\u003c\/li\u003e\n\u003cli\u003eEnd the vent outside the cabin, below and behind the cell, and away from the exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764974453038,"sku":"20-0484-12","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0484-12.jpg?v=1792383517"},{"product_id":"radium-dsv-12an-orb-to-12an-male-quick-fill-internal","title":"Radium DSV 12AN ORB To 12AN Male - Quick Fill (Internal)","description":"\u003ch2\u003eRadium DSV, 12AN ORB to 12AN Male, Quick Fill (Internal, Low Fill)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST, FCST-X and other tanks or cells with a 12AN ORB female vent port, used with a dry break\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0535\u003c\/p\u003e\u003cp\u003eA Dynamic Safety Valve is a must when you add a dry break refuelling system to a Radium FCST, FCST-X or any tank with a 12AN ORB vent. It does two jobs: it shuts the vent when the tank is full, and it gives roll-over protection. As the tank fills, a floating ball closes the vent so fuel can't rise into the line. Pressure then builds a little and the dump can starts to \"chug\", which tells you the cell is full, so you don't have to watch the fill.\u003c\/p\u003e\u003cp\u003eThis low-fill version suits cells with a small footprint and a short height to the filler, shutting off sooner to stop overfilling. It's one-piece billet 6061, Type-II anodised, suits all fuels including methanol and E85, and can be stripped for cleaning.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-high-fill\"\u003eRadium DSV, 12AN ORB to 12AN Male, High Fill (20-0935)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-valve-extension-adapter\"\u003eRadium DSV Valve Extension Adapter (20-1035)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5in-female-vented\"\u003eRadium Dry Break, 1.5\", Female, Vented (20-0549-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor vented (pressureless) dry break receivers. Don't use a DSV with a standard filler. Use the 20-0934 roll-over valve instead\u003c\/li\u003e\n\u003cli\u003eThe shut-off ball must sit below the highest point of the fill point, and at least one section of vent hose must sit above it\u003c\/li\u003e\n\u003cli\u003eNot for very early 20-014X-XX FCSTs, which only have 8AN ORB vent ports\u003c\/li\u003e\n\u003cli\u003eIf fuel comes out of the dry break vent during or after filling, the shut-off point is too high\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium FCST and FCST-X (12AN ORB vent port)\u003c\/li\u003e\n\u003cli\u003eOther tanks or cells with a 12AN ORB female vent port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764974518574,"sku":"20-0535","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0535.jpg?v=1792383517"},{"product_id":"radium-fuel-cell-vent-kit-8an","title":"Radium Fuel Cell Vent Kit - 8AN","description":"\u003ch2\u003eRadium Fuel Cell Vent Kit, 8AN\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, fuel cells with an 8AN male vent fitting, including Radium FCST and FCST-X\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0484-08\u003c\/p\u003e\u003cp\u003eA fuel cell vent lets air out as the cell fills and lets filtered air back in as fuel is used, so the tank never pressurises. This standard-flow kit suits systems with a direct or remote fill neck, and it can use the vent fitting supplied with a Radium FCST. The kit has an 8AN PushLok hose end, a Radium air filter, 1.83m (6ft) of 1\/2\" hose and a 1\/2\" to 3\/4\" adapter. Radium says it works well with its charcoal canister kits.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kit-12an\"\u003eRadium Fuel Cell Vent Kit, 12AN (20-0484-12)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds an 8AN male vent fitting. The one supplied with the Radium FCST works\u003c\/li\u003e\n\u003cli\u003eFor dry break and dump can systems, use the high-flow 12AN kit\u003c\/li\u003e\n\u003cli\u003eRun the hose up from the cell so fuel drains back, then briefly towards the front of the car to limit slosh\u003c\/li\u003e\n\u003cli\u003eAdd vertical loops as expansion chambers, keeping the total height at about 305mm (12\") or more. On remote-fill systems, the loops must sit above the fill point\u003c\/li\u003e\n\u003cli\u003eEnd the vent outside the cabin, below and behind the cell, and away from the exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764974616878,"sku":"20-0484-08","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0484-08.jpg?v=1792383517"},{"product_id":"radium-dry-break-filler-replacement-dust-cap","title":"Radium Dry Break Filler Replacement Dust Cap","description":"\u003ch2\u003eRadium Dry Break Filler Replacement Dust Cap\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium female dry break fillers\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0604\u003c\/p\u003e\u003cp\u003eKeeps dirt and grit out of a Radium female dry break, and the tank, between fills. It's vented to balance pressure changes in the tank, and a tether keeps it attached to the filler. Anodised aluminium with stainless hardware, and safe with all fuels including E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dry-break-1-5-female-remote-mount-vented\"\u003eRadium Dry Break, 1.5\" Female, Remote Mount, Vented (20-1004-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-vented-female-dry-break-1-5-elbow\"\u003eRadium Remote Mount Vented Female Dry Break, 1.5\" Elbow (20-1104-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-female-direct-mount-vented\"\u003eRadium Dry Break, 1.5\" Female, Direct Mount, Vented (20-0495-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDust cap only. Dry break filler not included\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium female dry break fillers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764976124206,"sku":"20-0604","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0604.jpg?v=1792383522"},{"product_id":"radium-dry-break-1-5in-female-vented","title":"Radium Dry Break, 1.5In, Female, Vented","description":"\u003ch2\u003eRadium Dry Break, 1.5\", Female, Vented\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium female dry break mounts and remote filler housings\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0549-V\u003c\/p\u003e\u003cp\u003eDry breaks make refuelling fast and mess-free. The male probe goes on the dump can and the female receiver on the car, and when they couple, both valves open and close together so nothing leaks. Paired with a Radium 20-0535 DSV, the vent shuts off automatically when the tank is full. This is the 1.5\" vented female receiver, threaded to fit Radium dry break mounts and remote filler housings. It's anodised aluminium with stainless hardware and bronze bushings, and everything inside suits all fuels including E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-male-prv\"\u003eRadium Dry Break, 1.5\", Male, PRV (20-0996)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-quick-fill-internal\"\u003eRadium DSV, 12AN ORB to 12AN Male, Quick Fill (20-0535)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-filler-replacement-dust-cap\"\u003eRadium Dry Break Filler Replacement Dust Cap (20-0604)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReceiver only. The dry break mount or filler housing isn't included\u003c\/li\u003e\n\u003cli\u003eIt's the replacement receiver for the 20-0495-V direct filler and fits all Radium remote filler housings\u003c\/li\u003e\n\u003cli\u003eIt swaps with Radium standard fill caps and swing valve fillers, and works with other dry breaks of the same size\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium female dry break mounts and remote filler housings (e.g. 20-0495-V, 20-1004-V, 20-1104-V, 20-1204-V)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764978352430,"sku":"20-0549-V","price":261.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0549-V.jpg?v=1792383530"},{"product_id":"radium-fuel-cap-remote-mount-vented","title":"Radium Fuel Cap, Remote Mount, Vented","description":"\u003ch2\u003eRadium Fuel Cap, Remote Mount, Vented\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium remote mount fuel fillers\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0548-V\u003c\/p\u003e\u003cp\u003eA replacement vented fill cap, the same standard cap supplied with every Radium standard-cap remote filler. It fits all styles of Radium remote filler.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-fuel-filler-1-5-vented\"\u003eRadium Remote Mount Fuel Filler, 1.5\", Vented (20-1005-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-fuel-filler-2-25-vented\"\u003eRadium Remote Mount Fuel Filler, 2.25\", Vented (20-1205-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCap only. The remote filler housing and fill neck aren't included\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium remote mount fuel fillers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764978385198,"sku":"20-0548-V","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0548-V.jpg?v=1792383531"},{"product_id":"radium-dump-can-cap-assembly-dry-break-filler","title":"Radium Dump Can Cap Assembly - Dry Break Filler","description":"\u003ch2\u003eRadium Dump Can Cap Assembly, 1.5\" Dry Break with PRV\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium quick fill dump cans with a standard filler, to convert to dry break\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1687-01\u003c\/p\u003e\u003cp\u003eTurns a Radium standard-filler dump can into a 1.5\" dry break can for fast, sealed refuelling in the pits. It's the same setup used on the 20-1697-01 can: a 1.5\" dry break probe, a clear short tube to watch the fill, and a pressure relief valve to vent the sealed can when the fuel warms up. With its dry break can, Radium measured 72 L\/min with the vent cap on and the flip cap open, and 97 L\/min with the vent cap off.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-standard-filler\"\u003eRadium Quick Fill Dump Can, Standard Filler (20-0697-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-quick-fill-internal\"\u003eRadium DSV, 12AN ORB to 12AN Male, Quick Fill (20-0535)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5in-female-vented\"\u003eRadium Dry Break, 1.5\", Female, Vented (20-0549-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCap assembly only. Dump can sold separately\u003c\/li\u003e\n\u003cli\u003eFor maximum flow, the tank or cell needs a large vent such as the Radium 20-0535\u003c\/li\u003e\n\u003cli\u003eThe plastic pour spout can be cut to suit 2.5\" and 3\" dry breaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium quick fill dump cans with a standard filler\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764990902574,"sku":"20-1687-01","price":576.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0687-01_af8f4aa2-03cf-42dc-a65d-5211fda0a4ac.jpg?v=1792383577"},{"product_id":"radium-dump-can-cap-assembly-standard-filler","title":"Radium Dump Can Cap Assembly - Standard Filler","description":"\u003ch2\u003eRadium Dump Can Cap Assembly, Standard Filler\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium quick fill dump cans 20-0697-00 and 20-0697-01\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0687-00\u003c\/p\u003e\u003cp\u003eThe replacement standard-filler cap for Radium quick fill dump cans, with a spout that suits factory fuel fillers. It's the same setup as on the 20-0697-00 can. You can also use it to move fuel from a dry break system into a simple container.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-standard-filler\"\u003eRadium Quick Fill Dump Can, Standard Filler (20-0697-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dump-can-cap-assembly-dry-break-filler\"\u003eRadium Dump Can Cap Assembly, 1.5\" Dry Break with PRV (20-1687-01)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCap assembly only. Dump can sold separately\u003c\/li\u003e\n\u003cli\u003eNot for the discontinued 20-0497-00, 20-0497-01 or 20-0697-EDC cans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium 20-0697-00 quick fill dump can, standard filler\u003c\/li\u003e\n\u003cli\u003eRadium 20-0697-01 quick fill dump can, 1.5\" dry break\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67764991000878,"sku":"20-0687-00","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0687-00_a8211b5a-3142-41fc-aa43-b73a5b7d3198.jpg?v=1792383578"},{"product_id":"radium-engineering-fcst-x-3-bolt-direct-mount-fill-neck-and-cap-vented","title":"Radium Engineering FCST-X 3-Bolt Direct Mount Fill Neck and Cap - Vented","description":"\u003ch2\u003eRadium FCST-X 3-Bolt Direct Mount Fill Neck and Cap, Vented\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST-X fuel cell surge tanks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1197-V\u003c\/p\u003e\u003cp\u003eA fill neck and vented cap that bolt straight to the 3-bolt filler flange on the FCST-X, for filling directly into the cell. The neck and cap are anodised aluminium, sealed with an FKM O-ring, with stainless hardware and a tether to keep the cap attached.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-vented-fill-neck-cap-only\"\u003eRadium Vented Fill Neck Cap Only (20-0148-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-filler-adapter-6-bolt-to-3-bolt\"\u003eRadium FCST Filler Adapter, 6-Bolt to 3-Bolt (20-1127)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-fill-neck-block-off-kit\"\u003eRadium FCST-X Fill Neck Block Off Kit (20-1060)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor an original 6-bolt FCST, use the 20-1127 6-bolt to 3-bolt adapter\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium FCST-X fuel cell surge tanks\u003c\/li\u003e\n\u003cli\u003eOriginal 6-bolt FCST with the Radium 20-1127 adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009187118,"sku":"20-1197-V","price":174.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1197-V.jpg?v=1792383703"},{"product_id":"radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-straight-with-1-5-barb","title":"Radium Engineering FCST-X 3-Bolt Remote Mount Fill Neck - Straight with 1.5\" Barb","description":"\u003ch2\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, Straight, 1.5\" Barb\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST-X fuel cell surge tanks (20-1990-XX, 20-1991-00, 20-1992-XX, 20-1993-00, 20-1995-00)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1027\u003c\/p\u003e\u003cp\u003eA remote filler setup has three parts: the filler on the body, the fill neck on the cell, and the hose joining them. This is the fill neck for the FCST-X: a straight machined 1.5\" barb that bolts to the 3-bolt filler flange. It's normally used with a body-mounted filler such as the Radium 20-1005-V or 20-1004-V. FKM O-ring sealed, with stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-fuel-filler-1-5-vented\"\u003eRadium Remote Mount Fuel Filler, 1.5\", Vented (20-1005-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dry-break-1-5-female-remote-mount-vented\"\u003eRadium Dry Break, 1.5\" Female, Remote Mount, Vented (20-1004-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-24an-elbow-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, 24AN Elbow (20-1047)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFCST-X only. For the original 6-bolt FCST, use the 20-0527\u003c\/li\u003e\n\u003cli\u003eRemote filler and hose sold separately\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST-X 20-1990-XX, 20-1991-00, 20-1992-XX, 20-1993-00 and 20-1995-00\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009219886,"sku":"20-1027","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1027_08783124-bc0c-4fd8-ad6c-217b730fe9f9.jpg?v=1792383704"},{"product_id":"radium-remote-mount-filler-adapter-2-25in","title":"Radium Remote Mount Filler Adapter, 2.25In","description":"\u003ch2\u003eRadium Remote Mount Filler Adapter, 2.25\"\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium remote fillers 20-1004-V, 20-1005-V, 20-1104-V, 20-1105-V, 20-1204-V and 20-1205-V\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1007\u003c\/p\u003e\u003cp\u003eA replacement outlet for Radium remote fillers that lets them connect to 2.25\" filler hose instead of the standard 1.5\" barb. To swap it, remove the six bolts holding the outlet, fit this adapter with its FKM O-ring and refit the stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-filler-adapter-1-5\"\u003eRadium Remote Mount Filler Adapter, 1.5\" (20-1015)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-filler-adapter-24an\"\u003eRadium Remote Mount Filler Adapter, 24AN (20-1008)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot for the 20-0504-V or 20-0505-V fillers\u003c\/li\u003e\n\u003cli\u003e2.25\" filler hose sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium remote fillers 20-1004-V, 20-1005-V, 20-1104-V, 20-1105-V, 20-1204-V and 20-1205-V\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009252654,"sku":"20-1007","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1007_c2388972-10d4-4db6-9b73-8a6c546eed12.jpg?v=1792383704"},{"product_id":"radium-engineering-remote-mount-filler-adapter-24an","title":"Radium Engineering Remote Mount Filler Adapter - 24AN","description":"\u003ch2\u003eRadium Remote Mount Filler Adapter, 24AN\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium remote fillers 20-1004-V, 20-1005-V, 20-1104-V, 20-1105-V, 20-1204-V and 20-1205-V\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1008\u003c\/p\u003e\u003cp\u003eA replacement outlet for Radium remote fillers that gives you a 24AN connection instead of the standard 1.5\" barb, for use with Radium's 24AN filler hose end. To swap it, remove the six bolts holding the outlet, fit this adapter with its FKM O-ring and refit the stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-hose-end-24an-75-with-wrench\"\u003eRadium 24AN 75° Hose End with Wrench (20-1009)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-filler-adapter-1-5\"\u003eRadium Remote Mount Filler Adapter, 1.5\" (20-1015)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-filler-adapter-2-25in\"\u003eRadium Remote Mount Filler Adapter, 2.25\" (20-1007)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot for the 20-0504-V or 20-0505-V fillers\u003c\/li\u003e\n\u003cli\u003eHose end and filler hose sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium remote fillers 20-1004-V, 20-1005-V, 20-1104-V, 20-1105-V, 20-1204-V and 20-1205-V\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009416494,"sku":"20-1008","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1008.jpg?v=1792383705"},{"product_id":"radium-engineering-remote-mount-fuel-filler-1-5-vented","title":"Radium Engineering Remote Mount Fuel Filler - 1.5\" Vented","description":"\u003ch2\u003eRadium Remote Mount Fuel Filler, 1.5\", Vented\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount to 1.5\" (38mm) ID filler hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1005-V\u003c\/p\u003e\u003cp\u003eA vented standard filler that mounts on the body, such as a guard or rear panel, rather than on the tank. A filler hose runs from it to the fill neck on the fuel cell or surge tank. The threaded, vented cap has roll-over protection in case the car ends up on its roof. The outlet is a machined 1.5\" barb, which can be swapped for a 2.25\" or 24AN adapter by removing six screws. It shares threads with Radium's dry break and swing valve caps, so you can upgrade it to a dry break later with the 20-0549-V. Anodised aluminium with stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-straight-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, Straight, 1.5\" Barb (20-1027)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5in-female-vented\"\u003eRadium Dry Break, 1.5\", Female, Vented (20-0549-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cap-remote-mount-vented\"\u003eRadium Fuel Cap, Remote Mount, Vented (20-0548-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds a 77mm (3.03\") hole in the body\u003c\/li\u003e\n\u003cli\u003eTank-side fill neck and filler hose not included\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009744174,"sku":"20-1005-V","price":279.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1005-V_4edbaa35-3529-4712-8dec-dcc9c031d687.jpg?v=1792383708"},{"product_id":"radium-engineering-dry-break-1-5-female-remote-mount-vented","title":"Radium Engineering Dry Break - 1.5\" Female Remote Mount (Vented)","description":"\u003ch2\u003eRadium Dry Break, 1.5\" Female, Remote Mount, Vented\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount to 1.5\" (38mm) ID filler hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1004-V\u003c\/p\u003e\u003cp\u003eA 1.5\" female dry break for mounting on the body, such as a guard or rear panel. When it couples with the male probe on a Radium dump can (20-0996 or 20-0496), both valves open and close together, so refuelling is fast and leak-free. It's vented with roll-over protection, and the O-ring sealed 1.5\" barb outlet can be swapped for a 2.25\" or 24AN adapter by removing six screws. Everything inside suits all fuels including E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-male-prv\"\u003eRadium Dry Break, 1.5\", Male, PRV (20-0996)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-filler-replacement-dust-cap\"\u003eRadium Dry Break Filler Replacement Dust Cap (20-0604)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-straight-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, Straight, 1.5\" Barb (20-1027)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-quick-fill-internal\"\u003eRadium DSV, 12AN ORB to 12AN Male, Quick Fill (20-0535)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds a 77mm (3.03\") hole in the body\u003c\/li\u003e\n\u003cli\u003eMale dry break and filler hose sold separately\u003c\/li\u003e\n\u003cli\u003eWorks with other dry breaks of the same size\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009776942,"sku":"20-1004-V","price":506.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1004-V_9a98dbc5-c792-4f3d-b847-39754e4316e0.jpg?v=1792383708"},{"product_id":"radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-24an-elbow-with-1-5-barb","title":"Radium Engineering FCST-X 3-Bolt Remote Mount Fill Neck - 24AN Elbow with 1.5\" Barb","description":"\u003ch2\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, 24AN 75° Elbow, 1.5\" Barb\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST-X fuel cell surge tanks (20-1990-XX, 20-1991-00, 20-1992-XX, 20-1993-00, 20-1995-00)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1047\u003c\/p\u003e\u003cp\u003eThe tank-side fill neck for an FCST-X remote filler setup, with a 75° elbow for 1.5\" filler hose. The elbow rotates 360° at the 24AN joint so you can point the hose wherever it needs to go in a tight boot, or remove it and run a 24AN filler hose instead. FKM O-ring sealed, with stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-fuel-filler-1-5-vented\"\u003eRadium Remote Mount Fuel Filler, 1.5\", Vented (20-1005-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dry-break-1-5-female-remote-mount-vented\"\u003eRadium Dry Break, 1.5\" Female, Remote Mount, Vented (20-1004-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-hose-end-24an-75-with-wrench\"\u003eRadium 24AN 75° Hose End with Wrench (20-1009)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFCST-X only, not the original 6-bolt FCST\u003c\/li\u003e\n\u003cli\u003eRemote filler and hose sold separately\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST-X 20-1990-XX, 20-1991-00, 20-1992-XX, 20-1993-00 and 20-1995-00\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765009973550,"sku":"20-1047","price":209.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1047_feec6a5e-3531-4658-a02c-a12c87ef8178.jpg?v=1792383709"},{"product_id":"radium-engineering-fcst-x-refueling-kit-direct-mount-standard-fill","title":"Radium Engineering FCST-X Refueling Kit - Direct Mount (Standard Fill)","description":"\u003ch2\u003eRadium FCST-X Refuelling Kit, Direct Mount, Standard Fill\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST-X fuel cell surge tanks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0841-20\u003c\/p\u003e\u003cp\u003eThe FCST-X ships without refuelling parts, so this kit gives you a filler and a vent kit. The fill neck and cap bolt straight onto the FCST-X, and the vent hose connects to the 8AN DSV vent valve that comes standard on every FCST-X.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-fuel-cell-surge-tank\"\u003eRadium FCST-X Fuel Cell Surge Tank (20-1990-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-complete-refueling-kit-standard-fill\"\u003eRadium FCST-X Complete Refuelling Kit, Standard Fill (20-0841-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFCST-X only. Older FCSTs with 6-bolt filler necks need 6-bolt parts, sold separately\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST-X fuel cell surge tanks\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765010956590,"sku":"20-0841-20","price":227.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0841-20.jpg?v=1792383713"},{"product_id":"radium-engineering-fcst-x-refueling-kit-remote-mount-standard-fill","title":"Radium Engineering FCST-X Refueling Kit - Remote Mount (Standard Fill)","description":"\u003ch2\u003eRadium FCST-X Refuelling Kit, Remote Mount, Standard Fill\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST-X fuel cell surge tanks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0841-22\u003c\/p\u003e\u003cp\u003eThe FCST-X ships without refuelling parts, so this kit gives you a filler and a vent kit. A flanged filler mounts on a body panel and connects through 914mm (36\") of 1.5\" ID filler hose to a fill neck elbow on the FCST-X. The 8AN vent hose connects to the 8AN DSV that comes standard on every FCST-X.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-fuel-cell-surge-tank\"\u003eRadium FCST-X Fuel Cell Surge Tank (20-1990-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-complete-refueling-kit-standard-fill\"\u003eRadium FCST-X Complete Refuelling Kit, Standard Fill (20-0841-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFCST-X only. Older FCSTs with 6-bolt filler necks need 6-bolt parts, sold separately\u003c\/li\u003e\n\u003cli\u003eRadium remote fillers need a 77mm (3.03\") hole in the body\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST-X fuel cell surge tanks\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765012300078,"sku":"20-0841-22","price":690.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0841-22.jpg?v=1792383725"},{"product_id":"radium-quick-fill-dump-can-caps","title":"Radium Quick Fill Dump Can Caps","description":"\u003ch2\u003eRadium Quick Fill Dump Can Cap\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium 19 L (5 US gal) quick fill dump cans\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0997\u003c\/p\u003e\u003cp\u003eScrews straight onto the filler side of a Radium 19 L quick fill dump can and seals it, so you can store or carry several filled cans to the track ready for the next session.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-standard-filler\"\u003eRadium Quick Fill Dump Can, Standard Filler (20-0697-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-1-5-dry-break-prv\"\u003eRadium Quick Fill Dump Can, 1.5\" Dry Break, with PRV (20-1697-01)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStorage and transport cap. Fit a dump can cap assembly or dry break cap to refuel\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium 19 L (5 US gal) quick fill dump cans\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765018886446,"sku":"20-0997","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/6x4_website_-3_107445b5-b25a-475e-8dd0-22439c2b1e46.webp?v=1792383770"},{"product_id":"radium-engineering-remote-mount-vented-female-dry-break-1-5-elbow","title":"Radium Engineering Remote Mount Vented Female Dry Break 1.5\" Elbow","description":"\u003ch2\u003eRadium Remote Mount Vented Female Dry Break, 1.5\" Elbow\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount fuel filler for fuel cells and surge tanks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1104-V\u003c\/p\u003e\u003cp\u003eA body-mounted 1.5\" vented female dry break for quick refuelling from a dry break dump can, with a 75° 24AN elbow outlet for 1.5\" filler hose. The elbow gives a neat hose path where there's not much room behind the panel. It mates with Radium's 20-0996 or 20-0496 male probes. The flange is 120.7mm (4.75\") with five M5 bolts on a 108mm (4.25\") PCD. All Radium remote filler caps share the same thread, and the outlet adapter can be swapped by removing six screws.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-male-prv\"\u003eRadium Dry Break, 1.5\", Male, PRV (20-0996)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-24an-elbow-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, 24AN Elbow (20-1047)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-filler-replacement-dust-cap\"\u003eRadium Dry Break Filler Replacement Dust Cap (20-0604)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds a 77mm (3.03\") hole in the body\u003c\/li\u003e\n\u003cli\u003eTank-side fill neck and hose not included. The 20-1027 \/ 20-1047 necks are FCST-X only. Older 6-bolt FCSTs use the 20-0527\u003c\/li\u003e\n\u003cli\u003eThe black 20-0597 hose is reinforced. The clear 20-0602 isn't, so it kinks easily and can cloud with some fuels\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765025898798,"sku":"20-1104-V","price":593.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1104-V.webp?v=1792383827"},{"product_id":"radium-engineering-20-1103-remote-mount-swing-valve-filler-1-5in-elbow","title":"Radium Engineering 20-1103 Remote Mount Swing Valve Filler - 1.5in Elbow","description":"\u003ch2\u003eRadium Remote Mount Swing Valve Filler, 1.5\" Elbow\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount fuel filler for fuel cells and surge tanks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1103\u003c\/p\u003e\u003cp\u003eA body-mounted filler with an OEM-style capless swing valve, so there's nothing to unscrew at the bowser. The 30mm opening takes both petrol and diesel nozzles, the valve seals with an FKM O-ring, and a press-fit dust cap is tethered to the flange. The 75° 24AN elbow outlet suits 1.5\" filler hose. All Radium remote filler caps share the same thread, so you can upgrade it to a dry break later with the 20-0549-V.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-svf-swing-valve-filler-cap\"\u003eRadium Remote Mount Swing Valve Filler Cap (20-1548)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-24an-elbow-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, 24AN Elbow (20-1047)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5in-female-vented\"\u003eRadium Dry Break, 1.5\", Female, Vented (20-0549-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds a 77mm (3.03\") hole in the body. Flange is 120.7mm (4.75\") with five M5 bolts on a 108mm PCD\u003c\/li\u003e\n\u003cli\u003eTank-side fill neck and hose not included. The 20-1027 \/ 20-1047 necks are FCST-X only. Older 6-bolt FCSTs use the 20-0527\u003c\/li\u003e\n\u003cli\u003eThe outlet adapter can be swapped by removing six screws\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765026128174,"sku":"20-1103","price":489.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1103_1200px_wide_f685c2b5-c5a4-4663-aad0-520fed1170de.webp?v=1792383830"},{"product_id":"radium-20-1105-v-remote-mount-vented-standard-filler-1-5in-elbow","title":"Radium 20-1105-V Remote Mount, Vented Standard Filler, 1.5in Elbow","description":"\u003ch2\u003eRadium Remote Mount Vented Standard Filler, 1.5\" Elbow\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount fuel filler for fuel cells and surge tanks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1105-V\u003c\/p\u003e\u003cp\u003eA body-mounted filler with a threaded, vented standard cap that has built-in roll-over protection, plus a 75° 24AN elbow outlet for 1.5\" filler hose. The elbow gives a neat hose path where space behind the panel is tight. The cap is tethered, and because all Radium remote filler caps share the same thread, you can upgrade it to a dry break later with the 20-0549-V.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cap-remote-mount-vented\"\u003eRadium Fuel Cap, Remote Mount, Vented (20-0548-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-24an-elbow-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, 24AN Elbow (20-1047)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5in-female-vented\"\u003eRadium Dry Break, 1.5\", Female, Vented (20-0549-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds a 77mm (3.03\") hole in the body. Flange is 120.7mm (4.75\") with five M5 bolts on a 108mm PCD\u003c\/li\u003e\n\u003cli\u003eTank-side fill neck and hose not included. The 20-1027 \/ 20-1047 necks are FCST-X only. Older 6-bolt FCSTs use the 20-0527\u003c\/li\u003e\n\u003cli\u003eThe outlet adapter can be swapped by removing six screws\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765035893038,"sku":"20-1105-V","price":365.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1105-V.jpg?v=1792383898"},{"product_id":"radium-dsv-12an-orb-to-12an-male-high-fill","title":"Radium DSV, 12AN ORB to 12AN Male, High Fill","description":"\u003ch2\u003eRadium DSV, 12AN ORB to 12AN Male, High Fill\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST, FCST-X and other cells or tanks with a 12AN ORB female vent port\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0935\u003c\/p\u003e\u003cp\u003eA Dynamic Safety Valve shuts the vent when the cell is full and gives roll-over protection. As the cell fills, a floating ball closes the vent so fuel can't escape up the line. With a dry break system, pressure then builds a little and the dump can starts to \"chug\", which tells you the cell is full. This high-fill version shuts off later than the low-fill 20-0535, so more fuel goes in. It suits cells with a large footprint or a tall filler, and remote fillers mounted well above the cell. One-piece billet 6061, Type II anodised, and suits all fuels including methanol and E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-valve-extension-adapter\"\u003eRadium DSV Valve Extension Adapter (20-1035)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-quick-fill-internal\"\u003eRadium DSV, 12AN ORB to 12AN Male, Low Fill (20-0535)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-roll-over-valve-12an-orb-to-8an-male\"\u003eRadium Roll Over Valve, 12AN ORB to 8AN Male (20-0934)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe shut-off ball must sit below the highest point of the fill point, and at least one section of vent hose must sit above it\u003c\/li\u003e\n\u003cli\u003eFor vented dry break receivers that don't pressurise\u003c\/li\u003e\n\u003cli\u003eNot for early 20-014X-XX FCSTs, which only have 8AN ORB vent ports\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium FCST and FCST-X\u003c\/li\u003e\n\u003cli\u003eOther cells or tanks with a 12AN ORB female vent port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065285934,"sku":"20-0935","price":95.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0935.jpg?v=1792384135"},{"product_id":"radium-remote-mount-svf-swing-valve-filler-1-5","title":"Radium Remote Mount, SVF, Swing Valve Filler, 1.5\"","description":"\u003ch2\u003eRadium Remote Mount Swing Valve Filler (SVF), 1.5\"\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount fuel filler with 1.5\" ID filler hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1003\u003c\/p\u003e\u003cp\u003eA body-mounted capless filler that works like a factory one: the swing valve opens when the nozzle goes in, so there's nothing to unscrew at the bowser. The 30mm opening takes petrol and diesel nozzles, and a press-fit dust cap is tethered to the flange. The outlet is a machined, O-ring sealed barb for 1.5\" filler hose, and it can be swapped for a 2.25\" or 24AN adapter by removing six screws. The cap thread matches Radium's dry break and standard caps, so it can be upgraded to a dry break with the 20-0549-V.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-svf-swing-valve-filler-cap\"\u003eRadium Remote Mount Swing Valve Filler Cap (20-1548)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-straight-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, Straight, 1.5\" Barb (20-1027)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-svf-swing-valve-filler-2-25\"\u003eRadium Remote Mount Swing Valve Filler, 2.25\" (20-1203)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMount on a fairly flat surface above the tank's fill point. It needs a 77mm (3.03\") hole and five 6mm bolt holes\u003c\/li\u003e\n\u003cli\u003eFill neck, hose and other tank-side parts not included\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065220398,"sku":"20-1003","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1003_1200px_wide.jpg?v=1792384135"},{"product_id":"radium-remote-mount-filler-adapter-1-5","title":"Radium Remote Mount Filler Adapter, 1.5\"","description":"\u003ch2\u003eRadium Remote Mount Filler Adapter, 1.5\"\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium remote fillers 20-1004-V, 20-1005-V, 20-1104-V, 20-1105-V, 20-1204-V and 20-1205-V\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1015\u003c\/p\u003e\u003cp\u003eThe 1.5\" barbed outlet fitted as standard to the 20-1004-V and 20-1005-V remote fillers, sold as a replacement or to change another Radium remote filler back to a 1.5\" hose. It swaps over by removing the six bolts that hold the outlet. FKM O-ring sealed, with stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-fill-neck-hose-kit-1-5-id\"\u003eRadium Fuel Fill Neck Hose Kit, 1.5\" ID (20-0597)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-filler-adapter-2-25in\"\u003eRadium Remote Mount Filler Adapter, 2.25\" (20-1007)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-filler-adapter-24an\"\u003eRadium Remote Mount Filler Adapter, 24AN (20-1008)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNot for the 20-0504-V or 20-0505-V fillers\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium remote fillers 20-1004-V, 20-1005-V, 20-1104-V, 20-1105-V, 20-1204-V and 20-1205-V\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065253166,"sku":"20-1015","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1015.jpg?v=1792384135"},{"product_id":"radium-dsv-valve-extension-adapter","title":"Radium DSV Valve Extension Adapter","description":"\u003ch2\u003eRadium DSV Valve Extension Adapter\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium DSVs (20-0535, 20-0935) on FCST \/ FCST-X or other 12AN ORB vent ports\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1035\u003c\/p\u003e\u003cp\u003eRaises the shut-off point of a Radium DSV, so more fuel goes into the cell and fill neck before the vent closes. With a high-mounted remote filler, that stops the dump can chugging before the cell is actually full, which speeds up refuelling. Any current Radium DSV screws into it. It's anodised 6061 with an FKM O-ring.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-quick-fill-internal\"\u003eRadium DSV, 12AN ORB to 12AN Male, Low Fill (20-0535)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-high-fill\"\u003eRadium DSV, 12AN ORB to 12AN Male, High Fill (20-0935)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDSV sold separately\u003c\/li\u003e\n\u003cli\u003eIf fuel comes out of the dry break vent during or after filling, the shut-off point is too high\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065351470,"sku":"20-1035","price":121.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1035_b.jpg?v=1792384135"},{"product_id":"radium-dry-break-probe-restrictor-1","title":"Radium Dry Break Probe Restrictor, 1\"","description":"\u003ch2\u003eRadium Dry Break Probe Restrictor, 1\"\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e 1.5\" male dry break probes, including Radium 20-0996 and 20-0496\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0704\u003c\/p\u003e\u003cp\u003ePresses into the inlet of a 1.5\" dry break probe to limit the fuel path to 1\" (25.4mm). Radium designed it for US endurance series refuelling rules (WRL and ZRS), and it suits any category that calls for a 1\" restrictor. It's 6061 aluminium, Type II anodised, and laser-engraved \"1-IN RESTRICTOR\" so scrutineers can see it at a glance. The 31.6mm press-fit OD suits most 1.5\" probes.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-male-prv\"\u003eRadium Dry Break, 1.5\", Male, PRV (20-0996)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dump-can-dry-break-probe-cover\"\u003eRadium Dump Can Dry Break Probe Cover (15-0004)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-1-5-dry-break-prv\"\u003eRadium Quick Fill Dump Can, 1.5\" Dry Break, with PRV (20-1697-01)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCheck your own category's refuelling rules before relying on it for compliance\u003c\/li\u003e\n\u003cli\u003ePress it into the probe inlet, then refit the tubing to the dry break and dump can barbs\u003c\/li\u003e\n\u003cli\u003eRadium's instructions mention replacement tubing and clamps. Email us to confirm whether they're supplied\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadium 20-0996 and 20-0496 1.5\" male dry breaks\u003c\/li\u003e\n\u003cli\u003eMost other 1.5\" dry break probes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065482542,"sku":"20-0704","price":86.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0704_c0c00dbb-4d3c-4eb8-8eb3-b808acb2e6b9.jpg?v=1792384135"},{"product_id":"radium-remote-mount-fuel-filler-2-25-vented","title":"Radium Remote Mount Fuel Filler, 2.25\", Vented","description":"\u003ch2\u003eRadium Remote Mount Fuel Filler, 2.25\", Vented\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount fuel filler with 2.25\" ID filler hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1205-V\u003c\/p\u003e\u003cp\u003eA body-mounted standard filler for setups running larger 2.25\" filler hose. The threaded vented cap has roll-over protection in case the car ends up on its roof, and the outlet is a machined barb for 2.25\" ID hose. It can be swapped for a 1.5\" or 24AN adapter by removing six screws, and the cap thread matches Radium's dry break caps, so you can upgrade it to a dry break later with the 20-0549-V.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cap-remote-mount-vented\"\u003eRadium Fuel Cap, Remote Mount, Vented (20-0548-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5in-female-vented\"\u003eRadium Dry Break, 1.5\", Female, Vented (20-0549-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-filler-adapter-1-5\"\u003eRadium Remote Mount Filler Adapter, 1.5\" (20-1015)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMount on a fairly flat surface above the tank's fill point. It needs a 77mm (3.03\") hole and five 6mm bolt holes\u003c\/li\u003e\n\u003cli\u003eFill neck, hose and other tank-side parts not included\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065417006,"sku":"20-1205-V","price":279.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1205-V.jpg?v=1792384135"},{"product_id":"radium-remote-mount-svf-swing-valve-filler-2-25","title":"Radium Remote Mount, SVF, Swing Valve Filler, 2.25\"","description":"\u003ch2\u003eRadium Remote Mount Swing Valve Filler (SVF), 2.25\"\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount fuel filler with 2.25\" ID filler hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1203\u003c\/p\u003e\u003cp\u003eA body-mounted capless filler that works like a factory one: the swing valve opens when the nozzle goes in, so there's nothing to unscrew at the bowser. The 30mm opening takes petrol and diesel nozzles, and a press-fit dust cap is tethered to the flange. The outlet is a machined, O-ring sealed barb for 2.25\" filler hose, and it can be swapped for a 1.5\" or 24AN adapter by removing six screws. The cap thread matches Radium's dry break and standard caps, so it can be upgraded to a dry break with the 20-0549-V.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-svf-swing-valve-filler-cap\"\u003eRadium Remote Mount Swing Valve Filler Cap (20-1548)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-svf-swing-valve-filler-1-5\"\u003eRadium Remote Mount Swing Valve Filler, 1.5\" (20-1003)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-filler-adapter-1-5\"\u003eRadium Remote Mount Filler Adapter, 1.5\" (20-1015)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMount on a fairly flat surface above the tank's fill point. It needs a 77mm (3.03\") hole and five 6mm bolt holes\u003c\/li\u003e\n\u003cli\u003eFill neck, hose and other tank-side parts not included\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065515310,"sku":"20-1203","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1203_1200px_wide-2.jpg?v=1792384135"},{"product_id":"radium-fcst-filler-adapter-6-bolt-to-3-bolt","title":"Radium FCST Filler Adapter, 6-Bolt to 3-Bolt","description":"\u003ch2\u003eRadium FCST Filler Adapter, 6-Bolt to 3-Bolt\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Older Radium FCSTs with the 6-bolt filler flange, to take current 3-bolt FCST-X filler necks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1127\u003c\/p\u003e\u003cp\u003eLets you fit any current 3-bolt FCST-X filler neck to an older FCST with the 6-bolt filler pattern. It adds less than 12.7mm (1\/2\") of height. To keep the same safety features as the earlier fillers, it has built-in roll-over protection using the same one-way valve, and it comes with a new 6-bolt gasket. Anodised aluminium with stainless hardware.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-direct-mount-fill-neck-and-cap-vented\"\u003eRadium FCST-X 3-Bolt Direct Mount Fill Neck and Cap, Vented (20-1197-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-straight-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, Straight, 1.5\" Barb (20-1027)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-3-bolt-remote-mount-fill-neck-24an-elbow-with-1-5-barb\"\u003eRadium FCST-X 3-Bolt Remote Mount Fill Neck, 24AN Elbow (20-1047)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe 3-bolt O-ring and hardware come with the filler neck, not this adapter\u003c\/li\u003e\n\u003cli\u003eSealing washers are only needed on early 20-014X-XX FCSTs\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST with the original 6-bolt filler flange\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065613614,"sku":"20-1127","price":121.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1127_1200px_wide.jpg?v=1792384135"},{"product_id":"radium-remote-mount-vented-female-dry-break-2-25","title":"Radium Remote Mount, Vented Female Dry Break, 2.25\"","description":"\u003ch2\u003eRadium Remote Mount Vented Female Dry Break, 2.25\"\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount dry break filler with 2.25\" ID filler hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1204-V\u003c\/p\u003e\u003cp\u003eA body-mounted quick-fill filler with a 1.5\" vented female dry break on top and a machined 2.25\" hose barb underneath. When a 1.5\" male dump can probe couples with it, both valves open and close together, so refuelling is fast and leak-free. With a Radium 20-0535 DSV, the vent shuts automatically when the cell is full. The vented receiver has roll-over protection, and everything inside suits all fuels including E85.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-male-prv\"\u003eRadium Dry Break, 1.5\", Male, PRV (20-0996)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-1-5-dry-break-prv\"\u003eRadium Quick Fill Dump Can, 1.5\" Dry Break, with PRV (20-1697-01)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-filler-replacement-dust-cap\"\u003eRadium Dry Break Filler Replacement Dust Cap (20-0604)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-quick-fill-internal\"\u003eRadium DSV, 12AN ORB to 12AN Male, Quick Fill (20-0535)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMount on a fairly flat surface above the tank's fill point. It needs a 77mm (3.03\") hole and five 6mm bolt holes\u003c\/li\u003e\n\u003cli\u003eFill neck, hose and other tank-side parts not included\u003c\/li\u003e\n\u003cli\u003eMates with Radium 20-0996 or 20-0496 male dry breaks and other dry breaks of the same size\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065580846,"sku":"20-1204-V","price":506.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1204-V.jpg?v=1792384135"},{"product_id":"radium-dry-break-1-5-male-prv","title":"Radium Dry Break, 1.5\", Male, PRV","description":"\u003ch2\u003eRadium Dry Break, 1.5\", Male, PRV\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Quick fill dump cans with a 1.5\" ID hose, mating with 1.5\" female dry breaks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0996\u003c\/p\u003e\u003cp\u003eThe male probe half of a dry break system, fitted to the spout of a dump can. When it couples with a female receiver on the car, both valves open and close together, so refuelling is fast and leak-free. The PRV lets you vent a sealed dump can that has warmed up in the sun: just push down on the centre stainless valve. It has a 1.5\" OD barb, is anodised aluminium with stainless hardware, and uses Aflas O-rings, which Radium recommends for methanol. It works with other dry breaks of the same size.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dump-can-dry-break-probe-cover\"\u003eRadium Dump Can Dry Break Probe Cover (15-0004)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-probe-restrictor-1\"\u003eRadium Dry Break Probe Restrictor, 1\" (20-0704)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5in-female-vented\"\u003eRadium Dry Break, 1.5\", Female, Vented (20-0549-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProbe cover sold separately\u003c\/li\u003e\n\u003cli\u003eMates with Radium 20-0495-V, 20-0504-V and 20-0549-V female dry breaks, and 20-1004-V, 20-1104-V and 20-1204-V remote fillers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eQuick fill dump cans with a 1.5\" ID fill hose (replacement probe for Radium dump cans)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065646382,"sku":"20-0996","price":594.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0996.jpg?v=1792384135"},{"product_id":"radium-remote-mount-svf-swing-valve-filler-cap","title":"Radium Remote Mount, SVF, Swing Valve Filler, Cap","description":"\u003ch2\u003eRadium Remote Mount Swing Valve Filler (SVF) Cap\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium swing valve remote fillers 20-1003, 20-1103 and 20-1203\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-1548\u003c\/p\u003e\u003cp\u003eThe replacement capless swing valve top for Radium remote fillers. The valve swings open when the nozzle goes in, so there's nothing to unscrew, and the 30mm opening takes petrol and diesel nozzles. It seals with an FKM O-ring and shares its thread with Radium's dry break and standard vented caps, so the styles are interchangeable. It's the cap supplied with every Radium swing valve filler.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-remote-mount-svf-swing-valve-filler-1-5\"\u003eRadium Remote Mount Swing Valve Filler, 1.5\" (20-1003)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-20-1103-remote-mount-swing-valve-filler-1-5in-elbow\"\u003eRadium Remote Mount Swing Valve Filler, 1.5\" Elbow (20-1103)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cap-remote-mount-vented\"\u003eRadium Fuel Cap, Remote Mount, Vented (20-0548-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCap only. The filler housing, fill neck and hose aren't included\u003c\/li\u003e\n\u003cli\u003eLubricate the cap O-ring and make sure it's fully seated\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are on the Instructions tab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium swing valve remote fillers 20-1003, 20-1103 and 20-1203\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67765065679150,"sku":"20-1548","price":191.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-1548_1200px_wide.jpg?v=1792384135"},{"product_id":"radium-direct-mount-fill-neck-and-cap-vented","title":"Radium Direct Mount Fill Neck And Cap, Vented","description":"\u003ch2\u003eRadium Direct Mount Fill Neck and Cap, Vented, 6-Bolt\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Original Radium FCST, or any fuel cell with a 6-bolt, 55mm (2.18\") bolt circle flange\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0197-V\u003c\/p\u003e\u003cp\u003eA fill neck and vented cap for filling straight into the cell. It bolts to the 6-bolt, 55mm (2.18\") bolt circle flange used on the original Radium FCST and many other fuel cells, with 1\/4\"-28 screws. The vented 20-0148-V cap lets air out as you fill, so the cell doesn't pressurise, and FKM gaskets and O-rings suit E85 and all common fuels. Machined, anodised aluminium with a laser-etched cap.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-vented-fill-neck-cap-only\"\u003eRadium Vented Fill Neck Cap Only (20-0148-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-fuel-cell-surge-tank-fill-neck-block-off-kit\"\u003eRadium FCST Fill Neck Block Off Kit (20-0360)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor the 6-bolt flange. The FCST-X uses the 3-bolt 20-1197-V instead\u003c\/li\u003e\n\u003cli\u003eRadium lists the 6-bolt direct fillers as discontinued, so stock is limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOriginal Radium FCST (6-bolt)\u003c\/li\u003e\n\u003cli\u003eAny fuel cell with a 6-bolt, 55mm (2.18\") bolt circle flange\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Default Title","offer_id":67861372207406,"sku":"20-0197-V","price":155.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0197-V_b47d9350-08e8-40d3-b55e-5abf690e0125.jpg?v=1793158492"},{"product_id":"radium-non-vented-fill-neck-cap-only","title":"Radium Non-Vented Fill Neck Cap Only","description":"\u003ch2\u003eRadium Non-Vented Fill Neck Cap Only\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium 20-0147 and 20-0197 direct mount fill necks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0148\u003c\/p\u003e\u003cp\u003eA replacement non-vented cap for Radium's 6-bolt direct mount fill necks, with an FKM O-ring for a fuel-tight seal. Use it where the cell is vented elsewhere and you don't want vapour escaping through the cap. This is a discontinued model, sold while stock lasts.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-vented-fill-neck-cap-only\"\u003eRadium Vented Fill Neck Cap Only (20-0148-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-direct-mount-fill-neck-and-cap-vented\"\u003eRadium Direct Mount Fill Neck and Cap, Vented, 6-Bolt (20-0197-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscontinued model. Runout stock only\u003c\/li\u003e\n\u003cli\u003eFits the 20-0147 and 20-0197 fill necks only\u003c\/li\u003e\n\u003cli\u003eThe fuel cell must be vented separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium 20-0147 and 20-0197 fill necks\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Default Title","offer_id":67861372272942,"sku":"20-0148","price":42.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0148.jpg?v=1793158492"},{"product_id":"radium-quick-fill-dump-can-1-5-dry-break-filler-male","title":"Radium Quick Fill Dump Can - 1.5\" Dry Break Filler - Male","description":"\u003ch2\u003eRadium Dry Break, 1.5\", Male (Dump Can Probe)\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Quick fill dump cans, mating with 1.5\" female dry breaks\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0496\u003c\/p\u003e\u003cp\u003eThe male probe half of a dry break system, fitted to a dump can. When it couples with a female receiver on the car, both valves open and close together, so refuelling is quick and leak-free. Used with a Radium 20-0535 DSV in the cell, the vent shuts automatically when it's full, so you don't need to watch the fill. Anodised aluminium with stainless hardware and a 1.5\" OD barb, and it suits all fuels including E85 and methanol.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dump-can-dry-break-probe-cover\"\u003eRadium Dump Can Dry Break Probe Cover (15-0004)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5in-female-vented\"\u003eRadium Dry Break, 1.5\", Female, Vented (20-0549-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-1-5-male-prv\"\u003eRadium Dry Break, 1.5\", Male, PRV (20-0996)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFemale receiver sold separately\u003c\/li\u003e\n\u003cli\u003eFor a probe that can vent a warm can, see the 20-0996 with PRV\u003c\/li\u003e\n\u003cli\u003eWorks with other 1.5\" dry break systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Default Title","offer_id":67861372305710,"sku":"20-0496","price":429.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0496.jpg?v=1793158492"},{"product_id":"radium-refueling-kit-direct-mount-standard-fill","title":"Radium Refueling Kit, Direct Mount, Standard Fill","description":"\u003ch2\u003eRadium Refuelling Kit, Direct Mount, Standard Fill, Original FCST\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST fuel cell surge tanks (original)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0815-20\u003c\/p\u003e\u003cp\u003eThe FCST doesn't come with refuelling parts, so this kit gives you a filler and a vent kit. The fill neck and cap mount directly on the FCST, and the vent kit connects to the 8AN vent valve (DSV) that comes standard on the FCST.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-refueling-kit-remote-mount-standard-fill\"\u003eRadium Refuelling Kit, Remote Mount, Standard Fill, Original FCST (20-0815-22)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-standard-filler\"\u003eRadium Quick Fill Dump Can, Standard Filler (20-0697-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel can not included\u003c\/li\u003e\n\u003cli\u003eFor the FCST-X, see the 20-0841-20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST (original)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Default Title","offer_id":67861374501166,"sku":"20-0815-20","price":222.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0815-20_4e1ae9df-1217-4a19-841d-d1c52652b460.jpg?v=1793158498"},{"product_id":"radium-remote-mount-dry-break-filler-1-5-female-fitting-vented","title":"Radium Remote Mount Dry Break Filler - 1.5\" - Female Fitting - Vented","description":"\u003ch2\u003eRadium Remote Mount Dry Break Filler, 1.5\" Female, Vented\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Universal, remote mount dry break filler with 1.5\" ID filler hose\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0504-V\u003c\/p\u003e\u003cp\u003eA body-mounted dry break filler with a 1.5\" vented female receiver (20-0549-V) and a machined barb for 1.5\" ID filler hose. When a 1.5\" male dump can probe couples with it, both valves open and close together, so refuelling is fast and leak-free. The vented receiver has roll-over protection, and everything inside suits all fuels including E85 and methanol. It works with other dry breaks of the same size.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-1-5-dry-break-filler-male\"\u003eRadium Dry Break, 1.5\", Male (20-0496)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dsv-12an-orb-to-12an-male-quick-fill-internal\"\u003eRadium DSV, 12AN ORB to 12AN Male, Quick Fill (20-0535)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cap-remote-mount-vented\"\u003eRadium Fuel Cap, Remote Mount, Vented (20-0548-V)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeeds a 77mm (3.03\") hole in the body. Flange is 4.75\" OD with five M5 bolts on a 4.25\" PCD\u003c\/li\u003e\n\u003cli\u003eTank-side fill neck and hose not included\u003c\/li\u003e\n\u003cli\u003eThe swappable 20-1007 \/ 20-1008 \/ 20-1015 outlet adapters don't fit this filler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering Clearance","offers":[{"title":"Default Title","offer_id":67861375713582,"sku":"20-0504-V","price":420.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0504-V.png?v=1793158505"},{"product_id":"radium-refueling-kit-remote-mount-standard-fill","title":"Radium Refueling Kit, Remote Mount, Standard Fill","description":"\u003ch2\u003eRadium Refuelling Kit, Remote Mount, Standard Fill, Original FCST\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e Radium FCST fuel cell surge tanks (original)\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 20-0815-22\u003c\/p\u003e\u003cp\u003eThe FCST doesn't come with refuelling parts, so this kit gives you a remote filler and a vent kit. A flanged standard filler mounts on a body panel and connects through 914mm (36\") of 1.5\" ID hose to a fill neck elbow on the FCST. The vent kit connects to the 8AN vent valve (DSV) that comes standard on the FCST.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-refueling-kit-direct-mount-standard-fill\"\u003eRadium Refuelling Kit, Direct Mount, Standard Fill, Original FCST (20-0815-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-quick-fill-dump-can-6gal-standard-filler\"\u003eRadium Quick Fill Dump Can, Standard Filler (20-0697-00)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel can not included\u003c\/li\u003e\n\u003cli\u003eRadium remote fillers need a 77mm (3.03\") hole in the body\u003c\/li\u003e\n\u003cli\u003eFor the FCST-X, see the 20-0841-22\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRadium FCST (original)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGenuine Radium Engineering, stocked in Somersby NSW and shipped Australia-wide by the official Australian distributor. Not sure it suits your build? Email \u003ca href=\"mailto:sales@radiumengineering.com.au\"\u003esales@radiumengineering.com.au\u003c\/a\u003e and we'll confirm fitment.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67974235914542,"sku":"20-0815-22","price":615.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/files\/20-0815-22.jpg?v=1794206504"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/6550\/7118\/collections\/20-0180_a65bc2d7-864a-478e-a775-d7ae55b5de47.png?v=1793152094","url":"https:\/\/radiumengineering.com.au\/collections\/fuel-filling-accessories.oembed","provider":"Radium Engineering Australia","version":"1.0","type":"link"}